Clarification from the agency

U.S. Citizens, Nationals, or those who owe allegiance to the U.S.

As an Electrical Engineer (Maintenance), you will:

• Creates detailed electrical designs and drawings (or reviews the designs of others) for substation equipment and transmission line equipment repairs, replacements, and additions.
• Develops budget estimates, schedules and project initiation documents and participates in developing multi-year plans for power system replacement and improvements.
• Drafts technical specification paragraphs for outdoor electrical equipment and construction specifications using available standard guide paragraphs.
• Acts as a technical representative during commission and energization of new equipment or changeover from existing to replacement or additional control and relaying schemes.
• Provides technical advise and assistance to inspectors in the coordination of contractor's work with dispatching personnel for stage construction in energized substations to insure safety of personnel and equipment
• Performs other duties as assigned.

Conditions of employment

• Must be a U.S. Citizen or National.
• This employer participates in the e-Verify program.
• Males born after 12/31/1959 must be registered for Selective Service.
• Suitable for Federal employment, as determined by a background investigation.
• May be required to successfully complete a probationary/trial period. Employees serving on a probationary or trial period may be terminated at any time during the probationary or trial period for performance, conduct, or business-related reasons in the interest of Federal service.
• In accordance with Executive Order 14170, applicants are encouraged to respond to the four short, free-response, essay questions in the questionnaire. Answers to these questions are not scored or rated. Your answers will be reviewed by the hiring manager and agency leadership if you are referred for selection consideration.
• Limit your resume to no more than two (2) pages. If more than two pages are submitted, only the first two pages will be reviewed to determine your eligibility and qualifications.
• Security clearance and associated requirements- Moderate Risk .
• Shift work and emergency overtime may be required.
• Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays.
• Total salary varies depending on location of position.
• The full performance level (FPL) of this position is GS-13.

Qualifications

In order to be qualified for this position, you must meet the basic requirement AND minimum qualification requirements for the grade level(s) in which you apply.

BASIC REQUIREMENT: You must meet one of the following:

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. (You must submit licensure or registration.)
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. (You must submit documentation)
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

MINIMUM QUALIFICATIONS: To be considered minimally qualified for this position, you must demonstrate that you have the required specialized experience and/or education for the respective grade level(s) in which you are applying:

SPECIALIZED EXPERIENCE REQUIREMENTS: A qualified candidate's online application and resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level in the Federal service. Specialized experience for this position is defined as:

For the GS-07: Your resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level (GS-05) in the Federal service or equivalent experience in the private sector. Specialized experience is defined as:

• Applying practical knowledge in the principles, techniques, and practices of electrical engineering.

You may also qualify for the GS-07:

• If you have successfully completed of one full year of graduate level education; -OR-
• If you have obtained a bachelor's degree with Superior Academic Achievement; -OR-
• If you have a combination of experience and education as described above; -OR-
• Applicants completing degree requirements within 120 days of 4-May-2026 may apply. Unofficial transcripts must be uploaded at time of application and official transcripts are required prior to entrance on duty.

For the GS-09: Your resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level (GS-07) in the Federal service or equivalent experience in the private sector. Specialized experience is defined as:

• Applying knowledge of electrical engineering theories, principles, and practices associated with planning, design, construction, surveying, operations, and maintenance of high voltage power system facilities.

OR

SUBSTITUTION OF EDUCATION: Two (2) years of progressively higher-level graduate education leading to a master's degree or master's or equivalent graduate degree, if related. Applicants completing degree requirements within 120 days of 4-May-2026 may apply. Unofficial transcripts must be uploaded at time of application and official transcripts are required prior to entrance on duty.

OR

A combination of superior academic achievement and 1 year of appropriate professional experience is qualifying at GS-9

For the GS-11: Your resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level (GS-09) in the Federal service or equivalent experience in the private sector. Specialized experience is defined as:

• Applying knowledge of Electrical Engineering theories, concepts, principles, standards, and methods for a range of power system equipment used in the electric utility industry.

ORSUBSTITUTION OF EDUCATION: 3 years of progressively higher level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree.

OR

• A combination of education and experience as described above to successfully perform the duties of the position.

For the GS-12: Your resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level (GS-11) in the Federal service or equivalent experience in the private sector. Specialized experience is defined as:

• Applying knowledge of a wide range of electrical engineering theories, principles, standards and methods to a wide range of power system equipment used in the electric utility industry.

For the GS-13: Your resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level (GS-12) in the Federal service or equivalent experience in the private sector. Specialized experience is defined as:

• Applying knowledge and skill of electrical engineering theories, principles, and practices associated with planning, design, construction, surveying, operations, and maintenance in the electric utility industry.

"Experience" refers to paid and unpaid experience. Examples of qualifying unpaid experience may include: volunteer work done through National Service programs (such as Peace Corps and AmeriCorps); as well as work for other community-based philanthropic and social organizations. Volunteer work helps build critical competencies, knowledge, and skills; and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Limit your resume to no more than two (2) pages. If more than two pages are submitted, only the first two pages will be reviewed to determine your eligibility and qualifications.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

• Attention to Detail
• Customer Service
• Decision Making
• Flexibility
• Integrity/Honesty
• Interpersonal Skills
• Learning
• Reading Comprehension
• Reasoning
• Self-Management
• Stress Tolerance
• Teamwork

Career Transition Assistance Programs: To receive selection priority for this position, you must: 1) meet the eligibility criteria; and 2) be rated "well-qualified".

You must meet all qualifications and eligibility requirements by the closing date (05/05/2026) of this announcement.

Reasonable Accommodation Requests: If you believe you have a disability (i.e., physical or mental), covered by the Rehabilitation Act of 1973 as amended, that would interfere with completing the USA Hire Competency Based Assessments, you will be granted the opportunity to request a reasonable accommodation in your online application. Requests for Reasonable Accommodations for the USA Hire Competency Based Assessments and appropriate supporting documentation for Reasonable Accommodation must be received prior to starting the USA Hire Competency Based Assessments. Decisions on requests for Reasonable Accommodations are made on a case-by-case basis. If you meet the minimum qualifications of the position, after notification of the adjudication of your request, you will receive an email invitation to complete the USA Hire Competency Based Assessments. You must complete all assessments within 48 hours of receiving the URL to access the USA Hire Competency Based Assessments, if you received the link after the close of the announcement. To determine if you need a Reasonable Accommodation, please review the Procedures for Requesting a Reasonable Accommodation for Online Assessments here.

To preview the Assessment Questionnaire, click https://apply.usastaffing.gov/ViewQuestionnaire/12944620.