Skip to main content
U.S. flag
Back to results

Utility Systems Repair Operator

Department of the Interior
National Park Service
Hot Springs National Park
This job announcement has closed

Summary

Career-Seasonal appointments are permanent positions and include the same benefits as Career appointments, but do not provide work on a year-round basis. Selectees are guaranteed to work at least 6 months per year but not more than 50 weeks per year, and you will be in a non-pay status for the remainder of the year.

All applications submitted by 11:59 (EST) on the closing day will receive consideration.

Overview

Help
Job canceled
Open & closing dates
06/17/2024 to 07/01/2024
Salary
$26.06 to - $30.36 per hour
Pay scale & grade
WG 10
Location
1 vacancy in the following location:
Hot Springs National Park, AR
Remote job
No
Telework eligible
No
Travel Required
Not required
Relocation expenses reimbursed
No
Appointment type
Seasonal - This is a Permanent Career-Seasonal Position
Work schedule
Full-time
Service
Competitive
Promotion potential
10
Supervisory status
No
Security clearance
Other
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Announcement number
MW-1543-HOSP-24-12443767-DE
Control number
796057600

Videos

Duties

Help

The Incumber will work independently to troubleshoot, repair, modify, overhaul, test, calibrate and install a variety of multi-component industrial and precision instruments and equipment. The equipment and systems normally serviced are interdependent electrical, mechanical and hydraulic devices which control and regulate flows, pressures and levels; such as magnetic and differential pressure flowmeter, sonic meters, turbidimeter and other equipment that measure and record operating parameters. The incumbent also installs, repairs and calibrates analyzers for turbidity, chlorine and pH as well as the trend recorders associated with these analyzers. They will troubleshoot and functionally test equipment to isolate defective components and perform repairs, adjusting and replacing parts as required. The incumbent will work using operating principles, blueprints, diagrams, technical manuals, test equipment and trade tools, The position works with various machinery including reciprocating pumps, centrifugal pumps, sewage grinders and electric motors. They repair machinery by replacing bent shafts, bearing, etc. The incumbent performs electrical testing of motors and other components checking continuity, ohms resistance, voltage and amperage using multimeters, meggers and continuity testers.

Requirements

Help

Conditions of employment

  • U.S. Citizenship required.
  • Appointment subject to background investigation and favorable adjudication.
  • Meet Selective Service Registration Act requirement for males
  • Selectee will be required to participate in the Direct Deposit Electronics Funds Transfer Program.
  • You will be required to operate a government (or private) motor vehicle as part of your official duties; a valid driver's license is required.
  • You will be required to wear a uniform and comply with the National Park Service uniform standards. A uniform allowance will be provided.
  • Possess a current EPA 608 universal certificate, or able to obtain a ceritifcation within one year of hire date.
  • You may be required to work on-call, evenings, weekends, holidays, overtime and shift work.
  • If you are a new employee or supervisor in the Federal government, you will be required to complete a one-year probationary period.
  • Applicants must be at least (1)18 years old or (2) at least 16 years old and: (a) Have graduated from high school or been awarded a certificate equivalent to graduating from high school; or (b) Have completed a formal vocational training program; or
  • (c) Have received a statement from school authorities agreeing with their preference for employment rather than continuing their education; or (d) Be currently enrolled in a secondary school and either work only during school vacation periods or work part-time during the school year under a formal student employment program.

Qualifications

To qualify for this position, you must have sufficient knowledge and ability in the following job-related factors:

  1. Ability to do the work with no more than normal suepervision Screen Out)·
  2. Knowledge of equipment, assembly, installation, repair, etc., of water treatment plants.
  3. Knowledge of maintenance and operation of a water analysis laboratory.·
  4. Technical Practices (Knowledge of technical tools and practices of various trades, i.e., plumbing and electrical).
  5. Ability to interpret and explain instructions, specifications, and manuals.·
  6. Dexterity and safety
If your knowledge and ability in the SCREEN OUT factor above is not sufficient, you will receive no further consideration. In preparing your application, describe in detail the experience and training which you have had that specifically prepared you for this job and to perform the duties described for this job. Experience should be clearly described and documented in your resume. The qualifications reviewer will not assume performance of such duties by Job Titles alone. Address your knowledge, skills and/or abilities in the areas shown in the job-related factors.Volunteer Experience: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Physical Demands: Work assignments typically require moderate to heavy physical effort to lift, carry, or otherwise handle items typically weighing up to 50 pounds. Duties require the incumbent to maneuver into and out of specific locations while dismantling and assembling utility related equipment. The incumbent makes repairs and installations from ladders, scaffolding, and platforms where the parts of systems worked on are in hard-to reach places. Frequent standing, walking, bending, crouching, reaching, and stooping is typical. Occasionally, climbing and work in high places may be required, as well as the use of hoists, holders, and pulleys when handling large equipment.


Working Conditions: Work is both indoors and outdoors for extended periods where the incumbent may be subject to prevailing weather conditions. The incumbent may be exposed to biological hazards or diseases while cleaning equipment or shoveling sludge, and hazardous gases such as methane, chlorine, hydrogen sulfide, and carbon monoxide. The incumbent may also be subject to electrical shock, loud noises, acids, and hydraulic fluids while working around motors and pumps. There is exposure to shock, burns, and strains. The incumbent follows prescribed safety practices and uses safety equipment such as face shields, gloves, hard-toe shoes, respirators, and protective clothing that may be uncomfortable to wear. The incumbent is required to attend and participate in safety meetings and training and review and follow safety regulations and policies prior to
using Personal Protective Equipment (PPE) such as goggles, rubber mats, gloves, hard hats and respirators as the jobs require. The incumbent may be required to operate motor vehicles and heavy engineering equipment.

Education

There is no substitution of education for experience for Wage Grade (WG) positions.

Additional information

This announcement may be used to fill additional positions if identical vacancies occur within 90 days of the issue date of the referral certificate.

ICTAP/CTAP Clearance (Example: Rehires): REMEMBER TO UPDATE THE "WHO MAY APPLY" FIELD- Current surplus and current or former displaced Federal individuals who have special priority selection rights under the Agency Career Transition Assistance Program (CTAP) or the Interagency Career Transition Assistance Program (ICTAP) must be well qualified for the position to receive consideration for special priority selection. Well qualified means that the applicant meets the following: OPM qualification standards for the position; all selective placement factors, where applicable; special qualifying conditions that OPM has approved for the position, where applicable; is physically qualified with reasonable accommodation, where appropriate to satisfactorily perform the duties of the position upon entry; and is rated by the organization at least at the well qualified level on all competencies. Federal employees seeking CTAP/ICTAP eligibility must submit proof that they meet the requirements of 5 CFR 330.605(2) for CTAP and 5 CFR 330.704 for ICTAP. This includes a copy of the agency notice, a copy of their most recent Performance Rating, and a copy of their most recent SF-50 noting current position, grade level, and duty location. Please annotate your application to reflect that you are applying as a CTAP/ICTAP eligible. If you are selected for Federal employment, you will be required to fill out a Declaration of Federal Employment, OF-306, prior to being appointed to determine your suitability for Federal employment and to authorize a background investigation. Failing to answer all questions truthfully and completely or providing false statements on your application may be grounds for not hiring you, or for firing you after you begin work. Also, you may be punished by fine or imprisonment (U.S. Code, Title 18, section 1001).

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

A review of your resume and supporting documentation will be made and compared against your responses to the Assessment Questionnaire to determine if you are qualified for this job. If your resume is incomplete or does not support the responses provided in the Assessment Questionnaire, or if you fail to submit all required documentation, you will be rated 'ineligible', 'not qualified', or your score will be adjusted accordingly. If a determination is made that you have inflated your qualifications or experience, you can lose consideration for this position. Please follow all instructions carefully; errors or omissions can affect your rating.

Candidates will be rated and ranked using Category Rating procedures. These procedures place candidates with veteran's preference above non-preference eligibles within each category. Veterans with a service connected disability of at least 10 percent are listed in the highest quality category, except when the position being filled is scientific or professional at the GS-09 grade level or higher. Under Category Rating, candidates will be rated and ranked into one of three categories:

  • Best Qualified - applicants possessing experience that substantially exceeds the minimum qualifications of the position including all selective factors and are highly proficient in all requirements of the job and can perform effectively in the position
  • Well Qualified - applicants possessing experience that exceeds the minimum qualifications of the position including all selective factors and are proficient in most of the requirements of the job
  • Qualified - applicants possessing experience that meets the minimum qualifications of the position including all selective factors and are proficient in some, but not all of the requirements of the job.
You will be evaluated on the following competencies and/or job elements:
  • Ability To Interpret Instructions, Specification, etc. (includes blueprints reading)
  • Ability To Use and Maintain Tools and Equipment
  • Knowledge of Equipment Assembly, Installation Repair, etc.
  • Knowledge of materials
  • Technical Practices (theoretical precise, artistic)
  • Use of Measuring Instruments


Please submit 1) a copy of your most recent performance appraisal/evaluation and 2) a list of any awards (e.g. superior performance awards, special act or achievement awards, quality step increase, etc.) you received in the last 5 years. Any performance appraisal/evaluation and award documentation you provide will be forwarded to the selecting official. The selecting official will review this documentation and give it due weight consideration during the overall selection process.

If you do not have your most recent performance appraisal/evaluation, please submit a statement as to why it is not available. Please indicate if any prior performance appraisals/evaluations were at an acceptable level.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.