As an Electrical Engineer, you will:

• Serve as Electrical Engineer in System Protection for system integration, modification, redesign, troubleshooting, installation, operation and maintenance.
• Works with manufacturers, BPA and other contractor resources for design, test, and integration of new and/or experimental equipment that extends the technology of the industry.
• Investigate problems and conditions in electrical SPC systems and equipment impacting costs, efficiency, safety, and performance; conducts detailed, comprehensive engineering studies to determine cause of equipment failures; research trends and patterns.
• Examine scheme design for conformance with accepted practice in the specialized field.
• Investigate equipment malfunction and recommends corrective action, depending on the nature of the problem and equipment involved.
• Perform fault calculations and coordination relay settings; analyzes automatic fault clearing operations for proper protective scheme and power circuit breaker operation; makes tests on major high voltage equipment as required by Regional assigned projects and emergencies.
• May be expected to attend and pass the SPC Field Engineer training program in BPA.

Conditions of employment

• When you apply you will be asked a series of questions to determine your eligibility for employment and your qualification for this position specifically. You must answer all of these questions completely and truthfully.
• Must be a U.S. Citizen or National.
• This employer participates in the e-Verify program.
• Males born after 12/31/1959 must be registered for Selective Service.
• Suitable for Federal employment, as determined by a background investigation.
• May be required to successfully complete a probationary period.
• This position does not support remote work. You will be required to report physically to the official reporting worksite as specified by the supervisor, but no less than 3 days per pay period.
• This position requires a valid driver's license as a condition of employment.
• After employment, this position may be subject to periodic physical examinations, as prescribed by competent medical authority and at BPA expense, if exposed to health hazards.
• The salary is based on a Special Rate Table, Number {0755}: https://apps.opm.gov/SpecialRates/
• A preliminary background check must be completed before a new employee can begin work. Current Federal employees or other individuals with an existing completed background investigation may not be required to undergo another background check.

Qualifications

BASIC REQUIREMENT:

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

-OR-

B. Combination of Education and Experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional Registration or Licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. -OR-
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.-OR-
3. Specified Academic Courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.-OR-
4. Related Curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

• Two years of progressively higher level graduate education leading to a master's degree, or master's, or equivalent graduate degree; your education must demonstrate the knowledge, skills, and abilities necessary to do the work. -OR-
• Combination of education and experience as described above. Less than one year of specialized experience may be combined with graduate education in excess of the amount required for the next lower grade level (i.e., credit hours beyond the first year of full-time study may be credited).

• Three years of progressively higher level graduate education leading to a Ph.D. degree, or Ph.D., or equivalent doctoral degree; your education must demonstrate the knowledge, skills, and abilities necessary to do the work. -OR-
• Combination of education and experience as described above. Less than one year of specialized experience may be combined with graduate education in excess of the amount required for the next lower grade level (i.e., credit hours beyond the first two years of full-time study may be credited).

"Experience" refers to paid and unpaid experience. Examples of qualifying unpaid experience may include: volunteer work done through National Service programs (such as Peace Corps and AmeriCorps); as well as work for other community-based philanthropic and social organizations. Volunteer work helps build critical competencies, knowledge, and skills; and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Physical Demands: The work requires some physical exertion, such as long periods of crouching, bending, or standing, or recurring and considerable walking, stooping, bending, and climbing in performing regular and periodic construction activities, field inspections, or to observe and study work operations. Work may also include frequent lifting of moderately heavy items weighing less than 50 pounds (i.e., 23 kilograms), such as equipment and samples.

Work Environment: The work involves regular and recurring exposure to moderate risks, discomforts, and unpleasantness such as high noise levels, toxic or irritating chemicals, and adverse weather conditions at sites. Special safety precautions such as protective clothing and gear may be necessary. The employee may be required to travel approximately 1-5 days per month.

You must meet all qualifications and eligibility requirements by the closing date of this announcement.

Before you are hired, you must sign and certify the accuracy of the information in your application. If you misrepresent your experience or education, or provide false or fraudulent information in or with your application, it may be grounds for not hiring you or for firing you after you begin work. Making false or fraudulent statements also may be punishable by fine or imprisonment. All information in your resume, or any part of your application must be true and accurate. If it is not, we will not hire you and if you already started working, it may be grounds for firing you.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

The Department of Energy uses an application tracking system to evaluate the responses you provide in the applicant assessment questionnaire to place you into an initial quality category via OPM's Category Rating procedures. These categories are "Best Qualified", "Well Qualified", and "Qualified. Then, the HR Office and/or Subject Matter Expert (SME) will conduct a quality review of your application and supporting documentation to ensure you have been placed into the appropriate quality category.

Your application is rated based on the extent and quality of your experience, education (when applicable), and training as described in your resume and applicant assessment. Your credentials are measured against the established duties of the position at the grade level(s) being advertised.

If you are eligible for career transition assistance plans such as ICTAP or CTAP, you must meet the definition of "well qualified" which is defined as scoring in the Well Qualified category (or higher).

If you are a Veteran Preference eligible candidate, you will be listed at the top of whichever quality category your rating places you in. CP/CPS veterans are placed at the top of the highest category for all positions except professional and scientific positions at GS-9 and higher.

If your resume is incomplete or does not support the responses you provided in your online questionnaire, or if you fail to submit all required documentation before the vacancy closes, you may be rated 'ineligible', 'not qualified', or your score may be adjusted accordingly

You will be evaluated for this job based on how well you meet the qualifications above.

Once the application process is complete, your resume and supporting documentation will be used to determine whether you meet the job qualifications. If you are minimally qualified for this job, your responses to the self-assessment questions (True/False, Yes/ No, Multiple Choice questions) will be evaluated and you will be placed into one of three pre-defined quality categories under Category Rating procedures. These categories are "Best Qualified", "Well Qualified", and "Qualified. If you rate yourself higher than is supported by your application materials, your responses may be adjusted and/or you may be excluded from consideration for this job.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):

• Attention to Detail
• Compliance
• Electrical Engineering
• Oral Communication
• Technical Problem Solving