Skip to main content
U.S. flag
Back to results

Electrical Engineer

Department of Energy
Bonneville Power Administration
This job announcement has closed

Summary

This position is located with Bonneville Power Administration (BPA), in SPC Celilo (TFDI), The Dalles District (TFD), Transmission Field Services (TF), Transmission Services (T).

A successful candidate in the Electrical Engineer position will serve as a System Protection Control (SPC) field engineer.

Overview

Help
Hiring complete
Open & closing dates
09/08/2023 to 09/17/2023
Salary
$109,908 to - $135,270 per year
Pay scale & grade
GS 13
Location
Few vacancies in the following location:
The Dalles, OR
Remote job
No
Telework eligible
Yes—as determined by the agency policy.
Travel Required
25% or less - You may be expected to travel for this position.
Relocation expenses reimbursed
Yes—You may qualify for reimbursement of relocation expenses in accordance with agency policy.
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
None
Job family (Series)
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Announcement number
23-BPA-37134-12119951-DE
Control number
748128400

Duties

Help

As an Electrical Engineer, you will:

  • Independently performs fault calculations and WECC-mandated relay settings reviews both within BPA and to review and coordinate those calculations and settings with adjoining utilities.
  • Completes and reviews AGC and interchange and customer revenue meter settings for new capital construction projects and customer interconnection projects and maintenance projects.
  • Provides and submits WECC-required documentation for relay settings, as covered under WECC PRC compliance standards.
  • Independently completes and reviews relay settings on schedule for new capital construction projects and existing maintenance applications including line relay settings, transformer relay settings, bank differential relay settings, bus differential settings, capacitor and reactor relay settings, and settings for other protective relay equipment.
  • Leads and coordinates the testing and energization of new construction SPC systems and equipment within the District.
  • Is the Technical Specialist and subject-matter expert on near-obsolete relaying equipment in the district that needs to be kept in operation and maintained until it is replaced by more modern equipment.
  • Coordinates with customers, state and federal agencies, the general public etc. outside of BPA as necessary to accomplish relay coordination.
  • Independently analyzes automatic fault clearing operations for proper protective scheme and power circuit breaker operation.
  • Independently investigates and resolves problems and abnormal conditions in electrical SPC systems and equipment; conducts detailed, comprehensive engineering studies to determine cause of equipment failures; researches trends and patterns.

Requirements

Help

Conditions of employment

When you apply you will be asked a series of questions to determine your eligibility for employment and your qualification for this position specifically. You must answer all of these questions completely and truthfully.

Key Requirements:

  • Must be a U.S. Citizen or National.
  • This employer participates in the e-Verify program.
  • Males born after 12/31/1959 must be registered for Selective Service.
  • Suitable for Federal employment, as determined by a background investigation.
  • May be required to successfully complete a probationary period.
  • This position does not support remote work. You will be required to report physically to the official reporting worksite as specified by the supervisor, but no less than 2 days per pay period.
  • A preliminary background check must be completed before a new employee can begin work. Current Federal employees or other individuals with an existing completed background investigation may not be required to undergo another background check.
  • This position requires a valid driver's license as a condition of employment.
  • The salary is based on a Special Rate Table, Number 0755: https://apps.opm.gov/SpecialRates/

Qualifications

BASIC REQUIREMENT:
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
-OR-
B. Combination of Education and Experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

  1. Professional Registration or Licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. -OR-
  2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.-OR-
  3. Specified Academic Courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.-OR-
  4. Related Curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

For more information on how to meet the Basic Requirements please visit: https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf

SPECIALIZED EXPERIENCE REQUIREMENTS:
A qualified candidate's resume must demonstrate at least one year of specialized experience equivalent to the next lower grade level (GS-12) in the Federal service. Specialized experience for this position is defined as (1) Performing Systems Protection and Control (SPC) systems and equipment integration, modification, redesign, troubleshooting, installation, operation and maintenance, and failure analysis; (2) Performing systems or equipment design, testing, and integration work that involved extensive analysis and resolution of conflicting engineering considerations; and (3) Reviewing work practices and procedures and proposing new or modified approaches to accomplishing work.

There is no substitution of education for experience at the GS-13 level.

"Experience" refers to paid and unpaid experience. Examples of qualifying unpaid experience may include: volunteer work done through National Service programs (such as Peace Corps and AmeriCorps); as well as work for other community-based philanthropic and social organizations. Volunteer work helps build critical competencies, knowledge, and skills; and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Physical Demands: The work is primarily sedentary. Some work may require periods of walking, standing, bending, climbing, or driving a motor vehicle in activities such as inspections of installed equipment and visits to construction sites and industrial, commercial, agricultural, and other business establishments. Employees may carry light items such as books, instruments, and other similar materials. The work does not require any special physical effort.

Work Environment: The work is usually performed in an office setting and normally involves everyday risks or discomforts requiring safety precautions typical of offices or meeting and training rooms; or may involve occasional exposure to conditions in production facilities, laboratories, or construction sites requiring normal safety precautions.

You must meet all qualifications and eligibility requirements by the closing date of this announcement.

Education

This vacancy has a positive education requirement. Education must be obtained from an accredited institution recognized by the U.S. Department of Education. See Department of Education Accreditation Search to verify school accreditation.

Foreign education must be reviewed by an organization recognized by the U.S. Department of Education. For special instructions pertaining to foreign education and a list of organizations that can evaluate foreign education, see the Department of Education website.DO NOT email or mail in any of your application documents. Documents will not be accepted outside of the online application system.

In order to be rated as qualified, you must provide copies of your college transcripts. Failure to provide copies of your college transcripts may result in a rating of "Ineligible".

Additional information

EEO Policy: http://www.usajobs.gov/eeo
Reasonable Accommodation Policy: http://www.usajobs.gov/raps
Veterans Information: http://www.usajobs.gov/vi
Telework: www.telework.gov
Selective Service Registration: http://www.sss.gov/

Hiring incentives may be authorized for a highly qualified candidate based on budget availability and in accordance with federal regulations.

BPA strives to ensure a safe, positive, inclusive work environment, supported by Leadership Behaviors. For more information on Leadership Behaviors visit: www.bpa.gov/goto/LeadershipBehaviors

We also understand the importance of work/life balance and offer a variety of programs and policies designed to create more flexible, responsive work environments supportive of commitments to community, home and family members. BPA also supports employees' overall wellness through its Be Well program, which helps employees adopt healthier lifestyles and feel better about their work/life balance. The program supports five key areas of life: career, community, financial, physical and social.

???????Under the Employee Referral Bonus program, certain BPA employees may be eligible for a monetary award for referring outside candidates for this difficult-to-fill position. The referring employee must complete the form BPA F 33300.01e and email it to careers@bpa.gov by midnight of the closing date of the job posting.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

The Department of Energy uses an application tracking system to evaluate the responses you provide in the applicant assessment questionnaire to place you into an initial quality category via OPM's Category Rating procedures. These categories are "Best Qualified", "Well Qualified", and "Qualified. Then, the HR Office and/or Subject Matter Expert (SME) will conduct a quality review of your application and supporting documentation to ensure you have been placed into the appropriate quality category.

Your application is rated based on the extent and quality of your experience, education (when applicable), and training as described in your resume and applicant assessment. Your credentials are measured against the established duties of the position at the grade level(s) being advertised.

If you are eligible for career transition assistance plans such as ICTAP or CTAP, you must meet the definition of "well qualified" which is defined as scoring in the Well Qualified category (or higher).

If you are a Veteran Preference eligible candidate, you will be listed at the top of whichever quality category your rating places you in. CP/CPS veterans are placed at the top of the highest category for all positions except professional and scientific positions at GS-9 and higher.

If your resume is incomplete or does not support the responses you provided in your online questionnaire, or if you fail to submit all required documentation before the vacancy closes, you may be rated 'ineligible', 'not qualified', or your score may be adjusted accordingly

You will be evaluated for this job based on how well you meet the qualifications above.

Once the application process is complete, your resume and supporting documentation will be used to determine whether you meet the job qualifications. If you are minimally qualified for this job, your responses to the self-assessment questions (True/False, Yes/ No, Multiple Choice questions) will be evaluated and you will be placed into one of three pre-defined quality categories under Category Rating procedures. These categories are "Best Qualified", "Well Qualified", and "Qualified. If you rate yourself higher than is supported by your application materials, your responses may be adjusted and/or you may be excluded from consideration for this job.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics):

  • Electrical Engineering
  • Information Management
  • Partnering
  • Project Management


Application of Veterans' Preference: If you are a preference eligible candidate, you will be listed at the top of whichever quality category your rating places you in. CP/CPS veterans are placed at the top of the highest category for all positions except professional and scientific positions at GS-9 and higher.

Career Transition Assistance Programs: To receive selection priority for this position, you must: 1) meet the eligibility criteria; and 2) be rated "well-qualified", which is defined as scoring 85.0 or higher.

You must meet all qualifications and eligibility requirements by the closing date (09/17/2023) of this announcement.

To preview the Assessment Questionnaire, click https://apply.usastaffing.gov/ViewQuestionnaire/12119951

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.