Clarification from the agency

This position is open to current onboard federal technicians of the Oklahoma Army National Guard within the military grades of WOC through CW2.

This position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4), Surface Maintenance Facility. The purpose of this position is to supervise workers directly or through subordinate leaders and/or supervisors in accomplishing work of the function. Plans work operations of great scope, complexity, and administrative authority. Determines the sequence, priority, and time for performance of operations within the limits of broad work schedules and time limits. The occupation and non-supervisory grade level which best reflects the nature of the overall work operations supervised is Surface Maintenance Mechanic, WG-5801-10.

DUTIES:
Planning: Plans use of subordinate workers, equipment, facilities, and materials on a week-to-week or month-to-month basis. Establishes deadlines, priorities, and work sequences, and plans work assignments based on general work schedules, methods, and policies set by the supervisor. Determines the number and types of workers needed to accomplish specific projects. Determines skills, materials, and equipment required to do the work. Redirects individual workers and resources to accomplish unanticipated work. Informs the supervisor of the need to revise work schedules and re-estimate labor and other resources. Participates in the initial planning of current and future work schedules, staffing needs, estimates, and recommendations as to scheduling projected work. Assists the supervisor with quarterly funding distribution and decisions, based on operational needs for units supported by customer activities. Reviews funding requirements, prioritizes request and allocates funding based on readiness, training, and mobilization requirements. Provides management with workload data, estimates, and recommendations to facilitate more effective management decisions for staffing and funding requirements to support customer units.

Work Direction: Assigns tasks to be performed based on readiness and explains work requirements, methods, and procedures. Investigates work related problems such as excessive costs or low productivity and determines causes. Implements corrective actions within their authority to resolve work problems. Recommends solutions to staffing problems, engineering requirements, and work operations directed by other supervisors. Ensures work in progress and completed work meets established standards by implementation of a Quality Control and Assurance program within the organization. Ensures equipment repairs do not exceed maintenance expenditure limits in accordance as established by regulation and or policies. Effectively, efficiently, and economically makes adjustments as necessary to maximize production, accomplish specified tasks, and manage resources. Notes work related problems and independently implements corrective actions, which can be taken without affecting work operations controlled by other supervisors. Assures tools, special tools, test measurement and diagnostic equipment, personal protective equipment, repair parts, petroleum, oils and lubricants, and other materiel are available when needed. Manages maintenance backlog through coordination with other maintenance activities. Evacuates and accepts equipment, repairs, and services to and from other maintenance facilities.

Administration: Sets performance standards, and makes formal appraisals of subordinate work performance. Ensures that regulations governing safety and housekeeping are observed with appropriate protective clothing and equipment being utilized.

Performs non-supervisory work, such as, transporting equipment, performing maintenance tasks, etc.

Develops, publishes, and ensures employee compliance with standing operating procedures for the activity supervised. Implements and complies with agency, state, and federal regulatory Occupational Safety and Health, and environmental requirements. Ensures use of quality conformant products through compliance with established materials shelf life programs. Ensures all aspects of Force Protection to include physical security, facility and vehicle key control, property accountability, access control and employee protection in accordance with established policies and regulations. Implements procedures to account for all real property, installation property, MTO&E (Modified Tables of Organization and Equipment) property, TDA (Tables of Distribution and Allowances) property, and installed equipment located at or assigned to the facility in accordance with state and federal regulations and policies. Ensure the employees wear appropriate safety equipment and follow pertinent safety precautions.

May be required to perform such additional duties as structural fire fighting, aircraft fire/crash/rescue duty, security guard, snow removal, munitions loading and handling, heavy equipment operation, maintenance of facilities and equipment, or to serve as a team member on boards to cope with natural disasters or civil emergencies.

Conditions of employment

• This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Males born after 31 December 1959 must be registered for Selective Service.
• Federal employment suitability as determined by a background investigation.
• May be required to successfully complete a trial period.
• Participation in direct deposit is mandatory.
• Must be able to obtain and maintain the appropriate security clearance of the position.
• This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.
• Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.
• Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day.
• The duties and responsibilities of your job may significantly impact the environment.
• You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.
• For positions requiring the operation of motor vehicles, candidates must have a valid state driver’s license for the state in which they live or are principally employed.
• For positions requiring a security clearance (Secret or Top Secret) the applicant must possess or be able to obtain a clearance within one year of appointment.
• Upon accepting this position, the employee may be required to serve up to a two-year probationary period.

Qualifications

MILITARY GRADES: WOC through CW2

GENERAL EXPERIENCE:
Experience or training which demonstrates knowledge of equipment to be able to do routine jobs, simple preventative maintenance tasks, and can use common tools and equipment in the line of work.

SPECIALIZED EXPERIENCE:
Experience or training leading to a thorough knowledge of the mechanical makeup, operation, and working relationships of complex systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles, and equipment.

Ability to diagnose, repair, overhaul, and modify a variety of combat, tactical, commercial, special purpose vehicles, and equipment.

Knowledge of electrical, electronic, hydraulic, pneumatic, and other non-mechanical systems that have a functional relationship and effect on the operation of mechanical systems.

Knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls.

Basic knowledge of electronics, sufficient to identify and replace defective components, such as sensors, diodes, and circuit boards.

Ability to repair or overhaul major components such as diesel, multi -fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems.

In addition to the journeyman level knowledge, experience which demonstrates the ability to plan, direct, and organize work assignments for lower grade personnel.

Experience which required the review of work requirements and establish priorities to meet deadlines.

Experience that provided knowledge of various lines of work performed by this function.

Experience which demonstrates the ability to supervise or the potential to perform such duties as evidenced by the ability to communicate knowledge of general supervisory concepts, and knowledge of shop processes.

Experience in adapting existing equipment and techniques to new situations.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.