This position is located in the Bureau of Overseas Buildings Operations, Program Development, Coordination, and Support Directorate, Office of Design and Engineering, Civil/Structural Engineering Division (OBO/PDCS/DE/CSE). The DE staff serves as OBO’s code officials and provides design, research and technical assistance Bureau-wide for all Department of State (DOS) facilities overseas.
Summary
This position is located in the Bureau of Overseas Buildings Operations, Program Development, Coordination, and Support Directorate, Office of Design and Engineering, Civil/Structural Engineering Division (OBO/PDCS/DE/CSE). The DE staff serves as OBO’s code officials and provides design, research and technical assistance Bureau-wide for all Department of State (DOS) facilities overseas.
Advise on established Department of State (DOS) design criteria and specific design problems caused by various structural and blast loading conditions, worldwide, and local skill levels in various locations.
Review and revise preliminary drawings and specifications relating to structural and blast work, including design proposals suggested by the tenant agencies whose requirements impact the structural loading of buildings.
Serve as a consultant to post management regarding buildings that have been structurally damaged by fires, explosions, hurricanes, settlement problems, and other phenomena.
Plan and conduct or direct conduct of initial planning studies or analyses related to the structural and blast engineering aspects of design and construction activities that may be contracted out.
Perform scheduling and layout of operations and inspection and surveillance of materials, methods, and equipment for OBO projects.
Must be able to obtain and maintain a Top Secret security clearance.
Statement of Employment & Financial Interest required prior to appointment.
Successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit: www.dhs.gov/E-Verify/
Qualifications
Applicants must meet all the qualification requirements described below by the closing date of this announcement. If you are qualifying based on education OR if there are mandatory education requirements listed below, you MUST submit a copy of your college transcript with your application.
Applicants MUST meet one of the following Basic Requirements:
A. Bachelor’s or Higher Degree: The program must be (1) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by ONE of the following:
1. Professional Registration or Licensure: Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2.Written Test: Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified Academic Courses: Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the Basic Requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related Curriculum: Successful completion of a curriculum leading to a bachelor's or higher degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor’s degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
Notes: 1) Applicants who meets the Basic Requirements in A or B above, except as noted under B.1., may qualify for positions in any branch of engineering unless selective factors indicate otherwise; 2) Professional engineering experience required for grades GS-7 and above is defined as non-routine engineering work that required and was characterized by professional knowledge of engineering, professional ability to apply such knowledge to engineering problems, and positive and continuing development of professional knowledge and ability; 3) To be considered, applicants MUST submit transcripts and copies of professional registration and/or licensure to verify Basic Requirements by the closing date of the announcement.
IN ADDITION to the Basic Requirements above, you MUST also have 1 year of specialized experience that is related to the work of the position, is equivalent to at least the GS-13 level in the Federal service, and demonstrates the following:
Experience developing, reviewing, and interpreting engineering standards, design criteria, and technical guidelines governing structural and blast mitigation aspects for facility assessments, new designs, or rehabilitation projects.
Experience performing, evaluating, or directing structural and blast dynamic analyses to assess and design building components to air-blast loads or explosive threats.
Experience providing technical oversight, construction-phase engineering support, or quality assurance reviews for the structural and blast-resistant components of facilities.
Education
See the qualifications section of this vacancy announcement for education requirements.
Education completed in foreign colleges or universities may be used to meet the education requirements if you can show that the foreign education is comparable to that received in an accredited educational institution in the United States. It is your responsibility to provide such evidence when applying. For a list of accredited organizations recognized as specializing in interpretation of foreign education credentials, visit: www.naces.org/members.php.
Multiple positions may be filled from this announcement. If eligible, applicants to this announcement may be referred to other similar positions in other Bureaus/Offices in the Department for up to 240 days. Telework eligibility and security clearance requirements may vary for such similar positions.
Additional information
To request a reasonable accommodation for additional time on the timed sections of the assessment, please submit your request using the “Request a Reasonable Accommodation” button within the Assessment Application.
For all other reasonable accommodations at the U.S. Department of State, please contact the Office of Accessibility and Accommodations (OAA) at OAA@state.gov.
OAA is responsible for reviewing and adjudicating reasonable accommodation (RA) requests for the Assessment Battery being used for this announcement. The following applies to all RA requests:
RA requests cover additional time on timed sections only.
Applicants submitting a RA request MUST attach supporting medical documentation signed by a licensed, treating medical provider. The documentation should describe the nature, severity, and expected duration of the condition, identify the relevant medical condition or diagnosis, and explain the basis for the requested extension. RA requests that do not contain supporting medical documentation attachments at the time of initial request may be subject to further review.
Note: the following documents do not, on their own, qualify for automatic approval of the RA request: Schedule A letters, VA benefits letters, or SSA letters.
Applicants MUST submit their application before the vacancy closes, even if pending an accommodation decision.
Applicants are encouraged to carefully follow instructions related to medical documentation provided in the vacancy announcement prior to beginning the RA process.
Applicants will have 48 hours after their RA request is adjudicated to complete the assessment battery. Scores generated after the allotted timeframe will not be admissible and the applicant will not be considered further for the vacancy.
If a different type of RA is needed, please contact OAA directly at OAA@state.gov.
If eligible, situational telework agreements may be permitted with supervisory approval.
Veterans: Veterans’ preference points are added to the passing score of candidates eligible for either 10-point or 5-point preference. Qualified veterans who have a compensable service-connected disability of at least 10% or more are listed at the top of a certificate regardless of score, except when the position being filled is scientific or professional at the GS-09 grade level, or higher. This position is considered scientific/professional. Other 10-point and 5-point preference eligible veterans who meet the eligibility and qualification requirements are placed in score order. View information on veterans' preference on OPM’s Fed Hire Vets website.
Agency & Interagency Career Transition Assistance Program (CTAP & ICTAP): View OPM’s CTAP & ICTAP eligibility website for more information. You must be rated in the Well-Qualified category and submit supporting documents under the required documents section of this announcement to receive selection priority consideration. To be considered Well-Qualified applicants must: score an 85 or above, meet Minimum Qualifications, and demonstrate proficiency in some, but not all major aspects of the position.
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How you will be evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
The evaluation process consists of the ApplyGov Competency Based Assessments for which applicants will be assigned a score between 70 and 100. A resume review by subject matter experts (SMEs) will be conducted for the top qualified candidates based on total score. Resumes longer than 2 pages will be deemed ineligible and will not be considered further.
You will be assessed on the following job-related competencies (knowledge, skills, abilities, and other characteristics):
Non-Supervisory: Oral Communication, Writing, Interpersonal Skills, Problem Solving, Teamwork, Technology Orientation, Customer Service, Attention to Detail and Self-Management.
Set aside at least 2 hours to take the external assessments; however, most applicants complete the assessments in less time. There are timed sections that must be completed within the allotted timeframe.
Your score from the external non-supervisory assessment will remain on file for 180 days, allowing you to apply for multiple DOS-announced positions without needing to retake the assessments.
Top applicants may be referred for further consideration. The assessment is used to measure the degree in which your background matches the competencies and KSAs required for this position. Your qualifications will be evaluated on the following competencies:
Knowledge of the concepts, principles, and theories of engineering.
Skill investigating, studying, and solving problems in developing design criteria.
Ability to perform comprehensive reviews of civil engineering projects.
Knowledge of various types of contracts, techniques for contracting or procurement.
Skill in developing, scheduling, coordinating, and managing projects and resources.
Ability to review and evaluate requests for change orders and claims relating to construction.
This announcement used the set number of highest-ranked eligibles method under 5 CFR §332.402 to refer candidates to the selecting official for further consideration and possible interview. All candidates tied at the cut score will be referred. We will provide the selecting official a sufficient number of names, when available, to consider at least 3 candidates per vacancy. If fewer than 3 eligible and available candidates per vacancy result, we may expand the referral in accordance with the pre-determined agency and OPM policy.
SMEs will review your resume to determine your qualifications for this position based on the required specialized experience. Your resume should demonstrate how you meet all aspects of the specialized experience statement. SMEs will not review additional information beyond your resume (e.g., links embedded in your resume will not be opened.). If meeting basic qualifications through education only or a combination of education and experience, applicants will not be referred to the SME panel but will be reviewed by the HR Specialist for referral.
In describing your experience, please be clear and specific. We do not make assumptions regarding your experience. Overstating your qualifications and/or experience in your application may result in your removal from consideration.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
All required documents listed below, that are applicable to you, must be submitted to our automated system by 11:59 p.m. Eastern Time (ET) on the closing date of this announcement.
1. Resume limited to two pages showing relevant work/volunteer experience, education and training. Include the start and end dates (from month/year to month/year) and the number of hours per week worked/volunteered. Your resume serves as the basis for qualification determinations and must support your answers to the completed online assessment questions. Resumes longer than two pages will be deemed ineligible and will not be considered further.
2. Transcripts, if applicable and you are qualifying based on education. See the Qualification and Education sections of this announcement for more information. If selected, an official/sealed college transcript(s) will be required to verify education prior to employment.
3. Other Qualification Documentation (e.g. certificates, certifications, etc.), if applicable. See the Qualification section of this announcement for more information.
4. Veterans' Preference Documentation, if applicable:
To claim 5-point preference, submit a copy of your DD-214 Certificate of Release or Discharge from Active Duty.
To claim 10-point preference, submit all required documentation outlined on the SF-15 (Application for 10-Point Veteran Preference) to support your claim (e.g., DD-214, official statement from the Department of Veterans Affairs, etc.). If we cannot verify your 10-point preference claim, your application will be reviewed for 5-point preference.
To claim 10-point derived preference (i.e., spouses, widows, widowers or mothers of veterans), submit a completed SF-15andall required documentation listed on the SF-15 to support your claim.
To claim 0-point Sole Survivorship preference, submit a copy of your DD-214 or another form of official documentation showing that your discharge or release from active duty occurred on or after August 29, 2008 and was based on a sole survivorship discharge.
For all preference claims:
DD-214 Member 4 copies are preferred and must show the dates of service, type of discharge, and any qualifying service campaign medals.
If you are currently on active duty and applying based on eligibility under the Veterans Opportunity to Work (VOW) Act, you must provide a certification on letterhead from your military branch which contains your military service dates, expected date of discharge or release, and the character of service to show that your military service was performed under honorable conditions. The expected date of discharge or release must be no later than 120 days after the certification is submitted for consideration for this vacancy announcement.
5. ICTAP/CTAP documentation, if applicable (e.g., reduction-in-force (RIF) separation notice, RIF separation SF-50 personnel action (ICTAP only, if available), most recent SF-50 (CTAP or ICTAP), certification of expected separation, etc.). In addition, submit a copy of your current (or last) performance rating of record which must be at least fully successful or equivalent and submit all required documents listed above that apply to you (e.g., resume, transcripts, SF-50, etc.).
If you are relying on your education to meet qualification requirements:
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To start your application, click Apply and we’ll walk you through the process to attach a resume and any required documents.
During the application process you can review, edit, delete, and update your information. We’ll automatically save your progress as you go, so you won’t lose any changes. You have until 11:59 p.m. Eastern Time (ET) on the closing date of this announcement to complete the application process.
STEP 1: Select the "Apply" button and follow the instructions to register or sign into USAJOBS.
STEP 2: Submit your resume. Please see the Required Documents section for specific information that should be outlined in your resume.
STEP 3: Complete the online assessment questions.
STEP 4: Submit all required documentation applicable to you, as listed in the Required Documents section.
Technical assistance with your on-line application is available through the Help Desk at fedhirehelp@applygovernment.com or by calling (866) 656-6830 between the hours of 7:00 a.m. and 7:00 p.m. ET
Alternate Application Procedures
If applying online poses an extreme hardship, you may request alternate application procedures to submit your application package. Contact the Human Resources office listed on the announcement between the business hours of 8:15 a.m. and 5:00 p.m. ET at least 2 working days prior to the closing date of this announcement. The application package for alternate application procedures must be submitted and received in the Human Resources office no later than 11:59 p.m. ET on the closing date of this announcement. Paper applications and information sent by mail will not be accepted.
U.S. Department of State
Not accepting applications by Mail
Charleston, South Carolina 29405
United States
Next steps
After all application packages are received, we will review applications and evaluate applicants’ qualifications. Then, in approximately two weeks after this announcement closes, we will refer candidates, as described in the “How You Will Be Evaluated” section, to the hiring manager for selection consideration. Your application status will be updated up to four times during the following hiring phases:
After applications are received.
After applications are assessed to determine qualifications.
After candidates are referred to the hiring manager.
After a selection is made.
For the selected candidates who receive a tentative job offer, we will conduct a suitability review and/or security background investigation that generally takes an average of at least two to six months.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
All required documents listed below, that are applicable to you, must be submitted to our automated system by 11:59 p.m. Eastern Time (ET) on the closing date of this announcement.
1. Resume limited to two pages showing relevant work/volunteer experience, education and training. Include the start and end dates (from month/year to month/year) and the number of hours per week worked/volunteered. Your resume serves as the basis for qualification determinations and must support your answers to the completed online assessment questions. Resumes longer than two pages will be deemed ineligible and will not be considered further.
2. Transcripts, if applicable and you are qualifying based on education. See the Qualification and Education sections of this announcement for more information. If selected, an official/sealed college transcript(s) will be required to verify education prior to employment.
3. Other Qualification Documentation (e.g. certificates, certifications, etc.), if applicable. See the Qualification section of this announcement for more information.
4. Veterans' Preference Documentation, if applicable:
To claim 5-point preference, submit a copy of your DD-214 Certificate of Release or Discharge from Active Duty.
To claim 10-point preference, submit all required documentation outlined on the SF-15 (Application for 10-Point Veteran Preference) to support your claim (e.g., DD-214, official statement from the Department of Veterans Affairs, etc.). If we cannot verify your 10-point preference claim, your application will be reviewed for 5-point preference.
To claim 10-point derived preference (i.e., spouses, widows, widowers or mothers of veterans), submit a completed SF-15andall required documentation listed on the SF-15 to support your claim.
To claim 0-point Sole Survivorship preference, submit a copy of your DD-214 or another form of official documentation showing that your discharge or release from active duty occurred on or after August 29, 2008 and was based on a sole survivorship discharge.
For all preference claims:
DD-214 Member 4 copies are preferred and must show the dates of service, type of discharge, and any qualifying service campaign medals.
If you are currently on active duty and applying based on eligibility under the Veterans Opportunity to Work (VOW) Act, you must provide a certification on letterhead from your military branch which contains your military service dates, expected date of discharge or release, and the character of service to show that your military service was performed under honorable conditions. The expected date of discharge or release must be no later than 120 days after the certification is submitted for consideration for this vacancy announcement.
5. ICTAP/CTAP documentation, if applicable (e.g., reduction-in-force (RIF) separation notice, RIF separation SF-50 personnel action (ICTAP only, if available), most recent SF-50 (CTAP or ICTAP), certification of expected separation, etc.). In addition, submit a copy of your current (or last) performance rating of record which must be at least fully successful or equivalent and submit all required documents listed above that apply to you (e.g., resume, transcripts, SF-50, etc.).
If you are relying on your education to meet qualification requirements:
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To start your application, click Apply and we’ll walk you through the process to attach a resume and any required documents.
During the application process you can review, edit, delete, and update your information. We’ll automatically save your progress as you go, so you won’t lose any changes. You have until 11:59 p.m. Eastern Time (ET) on the closing date of this announcement to complete the application process.
STEP 1: Select the "Apply" button and follow the instructions to register or sign into USAJOBS.
STEP 2: Submit your resume. Please see the Required Documents section for specific information that should be outlined in your resume.
STEP 3: Complete the online assessment questions.
STEP 4: Submit all required documentation applicable to you, as listed in the Required Documents section.
Technical assistance with your on-line application is available through the Help Desk at fedhirehelp@applygovernment.com or by calling (866) 656-6830 between the hours of 7:00 a.m. and 7:00 p.m. ET
Alternate Application Procedures
If applying online poses an extreme hardship, you may request alternate application procedures to submit your application package. Contact the Human Resources office listed on the announcement between the business hours of 8:15 a.m. and 5:00 p.m. ET at least 2 working days prior to the closing date of this announcement. The application package for alternate application procedures must be submitted and received in the Human Resources office no later than 11:59 p.m. ET on the closing date of this announcement. Paper applications and information sent by mail will not be accepted.
U.S. Department of State
Not accepting applications by Mail
Charleston, South Carolina 29405
United States
Next steps
After all application packages are received, we will review applications and evaluate applicants’ qualifications. Then, in approximately two weeks after this announcement closes, we will refer candidates, as described in the “How You Will Be Evaluated” section, to the hiring manager for selection consideration. Your application status will be updated up to four times during the following hiring phases:
After applications are received.
After applications are assessed to determine qualifications.
After candidates are referred to the hiring manager.
After a selection is made.
For the selected candidates who receive a tentative job offer, we will conduct a suitability review and/or security background investigation that generally takes an average of at least two to six months.
Fair and transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
