Skip to main content
U.S. flag
Back to results

Civil Engineer

Department of the Interior
U.S. Fish and Wildlife Service
This job announcement has closed

Summary

This position is a Civil Engineer, GS-0810-12 working for the R6-Division of Engineering.

The duty location can be located at any Department of the Interior location within Region 6. The states located within Region 6 are: Montana, Wyoming, Utah, Colorado, North Dakota, South Dakota, Nebraska, and Kansas. Duty location can be discussed during the job interview.

Overview

Help
Job canceled
Open & closing dates
12/06/2024 to 12/19/2024
Salary
$86,962 to - $125,685 per year
Pay scale & grade
GS 12
Location
1 vacancy in the following location:
Location Negotiable After Selection
Remote job
No
Telework eligible
Yes—as determined by the agency policy.
Travel Required
25% or less - You may be expected to travel for this position.
Relocation expenses reimbursed
Yes—You may qualify for reimbursement of relocation expenses in accordance with agency policy.
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
None
Job family (Series)
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Noncritical-Sensitive (NCS)/Moderate Risk
Trust determination process
Financial disclosure
Yes
Bargaining unit status
No
Announcement number
R6-25-12631414-MSK-SDHA
Control number
822532400

This job is open to

Help

Clarification from the agency

This position will be filled under the Office of Personnel Management's Direct Hire Authority and is open to all United States citizens and U.S. nationals. Veteran's preference and traditional rating and ranking of applications do not apply. All qualified applicants will be referred to the hiring manager for consideration for this position.

Duties

Help

As a Civil Engineer your duties will include but are not limited to the following:

  • Evaluates engineering aspects of state and federal regulatory and permitting programs, conducting bond adequacy reviews.
  • Reviewing designs for constructability, drafting specifications, determining and evaluating construction sequencing, researching and preparing appropriate levels of cost estimates, and reviewing and evaluating third party cost estimates through all phases of the planning and final design process.
  • Providing technical approval as the engineer in responsible charge of design activities and engineering decisions.
  • Works with Contracting Officer/Grants Officer/Awarding Official to implement and administer a variety of assigned contracts, including construction contracts, service or supply contracts, P.L. 93-638 Indian Self Determination and Education Assistance Act as amended contracts/agreements, interagency agreements, and financial assistance agreements.

Requirements

Help

Conditions of employment

  • Must be a U.S. Citizen or National.
  • Suitability for employment, as determined by background investigation.
  • Driver’s License: This position requires the incumbent to operate a government (or private) motor vehicle as part of their official duties. Selectee must hold and maintain a valid state driver’s license throughout their employment in this position.
  • Probationary Period: Selectees may be required to successfully complete a probationary period.
  • Notice of Financial Disclosure Report Requirement: This position is subject to a financial disclosure requirement and you will be required to complete either OGE Form 278e or OGE Form 450 as applicable within 30 days of your appointment
  • Individuals assigned male at birth after 12-31-59 must be registered for the Selective Service. To verify registration visit SSS.gov.
  • Registration: Registration as a Professional Engineer may be required as articulated by specific Bureau policy or practices. Certifications Certification: Certification to serve as a Federal Acquisition.
  • Certification to serve as a Federal Acquisition Certification (FAC) COR or AOTR may be required as articulated in Department and/or Bureau policies. Federal Acquisition Certification for Program and Project Manager (FACP/PM) may be required.

Qualifications

Only experience and education obtained by 12/19/2024 will be considered.

In order to qualify for this position you must possess both the Basic Requirement and Minimum Qualification.

Basic Requirement:
1) Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics; OR
2) Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.

The adequacy of such background must be demonstrated by one of the following:
A) Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions; OR

B) Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; OR

C) Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.; OR

D) Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

Minimum Qualification [GS-12]
1)1 year of specialized experience equivalent to at least the GS-11 grade level in the Federal service. Specialized experience may include: 1) Performs engineering analyses to include performing and coordinating technical planning activities; data collection (including validation and management); modeling and data analyses; analyses of site location and/or conditions; risk estimation and analyses; or analyses of instrumentation data; 2) Completes and/or reviews engineering designs to include: a) planning and conducting engineering studies or evaluations such as preliminary, appraisal, feasibility, final design, and value planning/value engineering; b) creating, performing, reviewing, checking, and/or modeling engineering designs; c) developing design criteria, procedures, and instructions; d) providing technical approval as the engineer in responsible charge of design activities and engineering decisions; e) contributing to the design and modifications of new and existing complex features to mitigate static, dynamic, and hydrologic/hydraulic loadings; or f) design, installation, and maintenance of instrumentation systems to provide engineering data for analysis and/or operational decision support; 3) Plans, schedules, coordinates, and conducts civil engineering facility examinations, reviews, and/or inspections which include conducting condition assessments and construction and transfer inspections; identifying deficiencies relative to design criteria, applicable codes and standards, or state or federal statutes or regulations; 4) Develops, monitors, and manages project plans that outline the scope, schedule, and budget of assigned projects. This includes: coordinating and communicating with other groups and offices throughout the organization such as program and project managers, engineering, finance, maintenance, permit compliance, and acquisition; 5) Provides technical reviews, peer reviews, and checking of designs, drawings, engineering analysis, and technical documents, specifications, and contract correspondence, ensuring documents are accurate and quality assurance processes were followed.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

PROOF OF EDUCATION: All applicants who are using education or a combination of education and experience to qualify must submit copies of official or unofficial transcripts which include grades, credit hours earned, major(s), grade point average or class ranking, institution name, and student name. If any required coursework is not easily recognizable on transcripts, or if you believe a portion of a particular course can be credited toward meeting an educational requirement, you must also provide a memorandum on letterhead from the institution's registrar, dean, or other appropriate official stating the percentage of the course that should be considered to meet the requirement and the equivalent number of units. Unofficial transcripts are acceptable; however, if you are selected for the position, you will be required to produce the original official transcripts.

PASS/FAIL COURSES: If more than 10 percent of your undergraduate course work (credit hours) were taken on a pass/fail basis, your claim of superior academic achievement must be based upon class standing or membership in an honor society.

GRADUATE EDUCATION: One academic year of graduate education is considered to be the number of credits hours your graduate school has determined to represent one academic year of full-time study. Such study may have been performed on a full-time or part-time basis. If you cannot obtain your graduate school's definition of one year of graduate study, 18 semester hours (or 27 quarter hours) should be considered as satisfying the requirement for one year of full-time graduate study.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: Recognition of Foreign Qualifications | International Affairs Office (ed.gov).

Additional information

PCS INFORMATION:
-Yes, entitlements for payment of basic moving expenses, as required and to the extent allowed by the Federal Travel Regulation (FTR) 302-3.101, are authorized for eligible applicants changing duty station when the change meets the distance tests as provided in FTR 302-1.1 and 302-2.6. All moving expenses are taxable.
-Discretionary entitlements are not authorized for this position

Telework:
This position is suitable for telework and may be allowed to telework with supervisory approval.

Additional Vacancies: One or more positions may be filled from applications received under this announcement in the advertised office or other U.S. Fish & Wildlife Service offices in the local commuting area.

Career Transition Assistance Plan (CTAP) or Interagency Career Transition Assistance Plan (ICTAP): Department of Interior (DOI) Career Transition Assistance Plan (CTAP) procedures apply in filling this vacancy. These programs apply to employees who have been involuntarily separated from a federal service position within the competitive service or Federal service employees whose positions have been deemed surplus or no longer needed. To receive selection priority for this position, you must: (1) meet CTAP or ICTAP eligibility criteria; (2) be rated well-qualified (i.e., meet the minimum qualification requirements, including any selective placement factors; education, and experience requirements) for the position with a score of 85 or above on the assessment questionnaire, and be able to perform the duties of the position upon entry. Applicants claiming CTAP/ICTAP eligibility must submit a copy of their most recent performance appraisal, proof of eligibility, and most current SF-50 noting position, grade level, and duty location with their application.
For more information visit: http://www.opm.gov/rif/employee_guides/career_transition.asp.

Reasonable Accommodation: The USFWS provides reasonable accommodations to applicants with disabilities. Please visit USAJOBS Help Center | Reasonable accommodation policy if you need a reasonable accommodation for any part of the application and hiring process.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

All applicants who submit a complete and legible application by the closing date of this vacancy announcement {or cut-off} will have their qualifications reviewed to determine if they possess the following knowledge, skills and abilities required to successfully perform the work of this position.

  • skill in applying, a wide range of engineering theories, concepts, principles, standards, and methods sufficient to provide advisory services in engineering analyses, documentation, and investigations, and in the planning and/or design process; and to provide engineering design, analyses, review, inspection, and/or documentation for a wide range of civil engineering assignments.
  • Knowledge of qualitative and quantitative analytical techniques and project management principles, methods, tools, and techniques in order to develop, schedule, coordinate, monitor, and manage projects and resources. Project management
    certification may be required for specific assignments.
  • Ability to develop new insights into situations and knowledge of new and emerging engineering methods and technology to apply when addressing engineering problems and needs.
  • Skill in identifying, conceptualizing, and developing solutions to engineering problems or needs, and skill in independently planning and conducting studies and reviews and developing technical documents such as site reviews, feasibility through final designs, and associated guidance criteria, procedures, and instructions.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.