Clarification from the agency

Open to the Public

You will serve as a Naval Architect within the Marine Safety Center. You will serve as project officer, naval architect, and tonnage measurer for: 1) Developing and interpreting tonnage-related requirements; 2) Performing vessel volume and principal dimension measurements; 3) Conducting oversight of delegated tonnage measurement responsibilities; 4) Providing government, industry and the public with advice and interpretations on tonnage measurement and 5) Enforcing international and domestic tonnage requirements.

Being a Coast Guard civilian makes you a valuable member of the Coast Guard team. Typical work assignments include:

• Performing detailed volumetric calculations to establish tonnages for vessels measured by the CG.
• Developing and issuing appropriate tonnage certifying documents, which are used to apply important regulatory requirements and/or serve as the basis for tonnage based fees.
• Providing oversight of classification societies which have been delegated the authority to measure vessels on behalf of the CG.
• Developing, maintaining, revising and interpreting international conventions, regulations, policies and guidance related to tonnage measurement.
• Using a variety of tools to disseminate interpretive information (Web sites, trade journals, email, written CG correspondence, etc.)
• Serving as an advisor and consultant to officials and managers both within and outside the CG on a broad range of marine engineering and Naval Architecture activities and policy issues.

Conditions of employment

All qualification requirements must be met by the closing date of the announcement.

Key Requirements:

1. Must be a U.S. Citizen or National.
2. Must be registered or exempt from the Selective Service. See www.sss.gov
3. A one-year probationary period may be required.
4. Suitable for Federal employment determined by background investigation.
5. This position requires a Secret clearance
6. This is a Bargaining Unit position.
7. Unofficial transcripts are required at the time of application.

Qualifications

Basic Requirements: This position has a positive Education Requirement in addition to at least one year of Specialized Experience or substitution of education for experience or combination (if applicable) in order to be found minimally qualified. Transcripts must be submitted with your application package. You MUST meet the following requirements:

EDUCATION:

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying professional engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT) or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements. The courses must be fully acceptable toward meeting the requirements of an engineering program as described above.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

ADDITIONAL REQUIREMENTS:

To qualify at the GS-12 grade level, applicants must have at least one (1) full year of specialized experience equivalent to at least the GS-11 grade level in the federal sector. Specialized experience is experience that has equipped you with the particular ability, skill, and knowledge to successfully perform the duties of this position and is typically in or related to this line of work.

Specialized experience must include the following:
- Experience in the private or public sector providing technical guidance on naval architecture projects that include submarines, surface vessels, or ocean engineering projects.
- Applying naval architectural and engineering concepts and principles in order to investigate and make calculations to establish design characteristics of lighterage, small craft, and nearshore construction.

To qualify at the GS-13 grade level, applicants must have at least one (1) full year of specialized experience equivalent to at least the GS-12 grade level in the federal sector. Specialized experience is experience that has equipped you with the particular ability, skill, and knowledge to successfully perform the duties of this position and is typically in or related to this line of work.

Specialized experience must include the following:
- Experience in the private or public sector providing technical leadership and consultation on naval architecture projects that include submarines, surface vessels, and ocean engineering systems.
- Participating in implementing ship design policy and conducting studies related to technical ship design issues.
- Providing technical advice or guidance on ship design changes, alteration, and repair.

Specialized experience is experience that has equipped you with the particular ability, skill, and knowledge to successfully perform the duties of this position and is typically in or related to this line of work.

NOTE: Education cannot be substituted for experience at this grade level.
NOTE: Transcripts must be submitted with your application.

National Service Experience (i.e., volunteer experience): Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

The Office of Personnel management (OPM) must authorize employment offers made to current or former political appointees. If you are currently, or have been within the last 5 years, a political Schedule A, Schedule, C, Non-career SES or Presidential Appointee employee in the Executive Branch, you must disclose this information to the Human Resources Office.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

We will review your resume and supporting documentation to ensure you meet the basic qualification requirements. If you meet the minimum qualifications, your experience, education and training will be rated using the on-line assessment to place you in one of three categories. The necessary Knowledge, Skills, and Abilities to perform this job are:

• Architecture
• Engineering and Technology
• Oral Communication
• Technical Competence
• Technology Application
• Writing

If you meet the minimum qualifications, you will be placed in one of the following categories:

1. Best-Qualified: Applicants possessing experience that substantially exceeds the minimum qualifications of the position and demonstrate high proficiency in all of the critical competencies, including all Selective Placement Factors (SPF) and appropriate Quality Ranking Factors (QRF) as determined by the job analysis.
2. Well-Qualified: Applicants possessing experience that exceeds the minimum qualifications of the position and demonstrates acceptable proficiency in all of the critical competencies, including all SPFs and appropriate QRFs as determined by the job analysis.
3. Qualified: Applicants possessing experience that meets the minimum qualifications of the position and demonstrate basic proficiency in most of the critical competencies, including all SPFs and appropriate QRFs as determined by the job analysis.

If you are best qualified, you may be referred to the hiring manager for consideration and may be called for an interview. Preview the job questionnaire https://apply.usastaffing.gov/ViewQuestionnaire/12568628.

Veterans: Qualified veterans who have a compensable service-connected disability of at least 10% are listed in the best-qualified category, except when the position being filled is scientific or professional at the GS-09 grade level, or higher. (This position is considered scientific/professional.). Other 10-point preference eligibles and veterans with 5-point preference who meet the eligibility and qualification requirements are placed above non-preference eligibles within the category in which they qualify. View information on veterans' preference.

Interagency Career Transition Assistance Program (ICTAP) Eligibles: If you have never worked for the federal government, you are not ICTAP eligible. View information about ICTAP eligibility on OPM's Career Transition Resources website. To be considered eligible under ICTAP, you must be placed in the well-qualified category for this position, as described above. In addition, you must submit the supporting documents listed under the required documents section of this job announcement.