This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/786080300. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.
This National Guard position is for a SHEET METAL MECHANIC (AIRCRAFT), Position Description Number PDD1371000 and is part of the MA ANG 104th FW, National Guard. This is a Bargaining Unit position. The unit point of contact and contact phone for this position is:
Learn more about this agency04/10/2024 to 05/01/2024
$34.86 - $40.66 per hour
WG 10
1 vacancy in the following location:
No
No
Occasional travel - You may be expected to travel for this position.
No
Permanent
Full-time
Excepted
None
No
No
MA-12381519-AF-24-104-023
786080300
Current members, those who want to join or transitioning military members.
Open to current members of the Massachusetts Air National Guard and those willing and eligible to enlist or transfer into the Massachusetts Air National Guard.
(1) Independently inspects aircraft and determines the nature and extent of repairs to be made, using applicable technical orders as guidelines. Works directly on the aircraft and its components, fulfilling such tasks as removal, repair, modification and installation of parts and assemblies, such as frames, stringers, longerons, bulkheads, beams, ribs, spars, skin, cowling, brackets, faring, access doors, panels and other related items. May be required to clear red"X" conditions.
(2) Repairs cracks in aircraft skin. Fabricates and fits patches to damaged areas, determining repair detail necessary to retain or restore original strength. Fits and trims components to aircraft such as landing gear doors, control surfaces, flaps access doors and other assemblies. Seals structures to make them pressure, water and weather tight.
(3) Troubleshoots aircraft structural repair situations in such areas as fuselage, tails, wings, cowlings, and stabilizers. Removes, forms, fits, and installs highly stressed and double contoured skins, using hand or powered drilling and cutting tools and other metalworking equipment. Determines shear and bearing load factors duringrivet replacement. Installs heads up, regular, heat treated, high shear, and blind type aircraft rivets and fasteners, using pneumatic riveters, special tools and bucking bars. Removes damaged or broken fasteners and receptacles.
(4) Aligns and balances component structures and airframe using precision measuring instruments and levels. Performs metal-to-metal bonding where delamination of surfaces and core material occurs in control surfaces.
(5) Inspects damage or deterioration and determines repair or replacement of plastic, fiberglass, composites, bonded structures, and bonded honeycomb assemblies using powered and nonpowered tools and equipment. Repairs or replaces retaining frames and installs plasticlaminated blanks. Designs and constructs forming fixtures.(6) Manufactures and ensures that metal tubing, conduits and cables are fabricated and tested in accordance with drawings and specifications. Fabricates and repairs flexible control cables.
(7) Performs fabrication of local manufactured items requited for aircraft and equipment. Work includes layout, bending, cutting,forming and assembling. Devise and calculates patterns employing theprinciples of triangulation, radial and parallel line development.
(8) Sets up and operates power shears, brakes, rolls,dimpling machines, drill presses, saws, portable powered tools, specific detection and measuring equipment, and other metal workingequipment, including use of other tools of the trade. Requisitions necessary supplies and equipment for the activity.
(9) Prepares and designs layout, dies, jigs, and templatesnecessary to carry out fabrication repair or modification of aircraft,engine, AGE, and other equipment. Works from blueprints, technicalorders diagrams, and work orders.
10) Identifies metal corrosion. Performs necessary testing to identify type corrosion present by examination with magnifying equipment, chemical and mechanical methods and treats aircraft engines, in accordance with applicable technical publications. Ensures that work assignments received from supervisor or maintenance control are accomplished in a timely manner.
(11) Removes corrosion by mechanical and chemical procedures to include use of portable powered (electric and pneumatic) sanders, buffers, brushes, bead blasters, vacuum cleaners, scrapers, grinders, acids, caustics, solvents, alcohols and other agents used in corrosion control processes. Treats metal with chemical procedures, such asacids and caustics for passivation and etching, to protect metal fromoxidation. Performs such functions as pickling of metals to prepare for good bonding with primer coat of protective materials.
(12) Applies protective coatings, markings, and decals after proper removal of corrosion and treatment of metals. Uses conventional paint spray equipment, electrostatic spray equipment, brushes and special applicators when applying primers and surface coatings.
.(13) Identifies, blends, stores, controls, and disposes of hazardous materials such as acids, caustics, alcohols, solvents, cleaners, primers and surface coatings used for corrosion removal, treatment and protection in accordance with applicable directives.
(14) May operate the wash rack. Accomplishes corrosion and washing inspections within schedule provided to ensure compliance with the monthly and weekly maintenance plan. May conduct training on proper methods and procedures of wash rack operations.
(15) May assist in training of drill status guard members and in maintenance of publication files of applicable technical orders, regulations, manuals and local directives.
(16) Performs other duties as assigned. Full PD not listed. For more information, please contact unit representative listed above.
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
MILITARY INCENTIVES - BONUSES AND STUDENT LOAN REPAYMENT PROGRAM: If you are selected for this position, you may lose your eligibility for your National Guard Enlistment/Reenlistment Bonus and Student Loan Repayment Program incentives. In order to avoid losing your incentive eligibility, you should check with your incentives manager prior to accepting an offer for the position.
For M-Day/Traditional personnel who are currently receiving incentives to include Bonuses and the Student Loan Repayment Program incentive, the following termination rule applies:
Incentive Termination without Recoupment:
If you accept an Active Guard Reserve (AGR) position or a Military Technician (Mil Tech) Permanent or Indefinite position after 25 February 2010 where membership in the National Guard is a condition of employment, your bonus will be terminated with no recoupment.
You will be evaluated for this job based on how well you meet the qualifications above.
Please follow all instructions carefully. Errors or omissions may affect your eligibility. Once the application process is complete, a review of resume and supporting documentation will be made and compared against your responses to the assessment questionnaire to determine if you are qualified for this job. If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.
Resume must be submitted with the following information:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12381519
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/786080300. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Learn more about
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.
The National Guard is the oldest component of the Armed Forces of the United States. Since the earliest American colonial days, citizens have joined together for collective defense. We have a proud tradition of coming to the aid of our friends and neighbors in times of serious emergencies. Join our National Guard team and serve your nation, your states and your community!