THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.
This National Guard position is for a ALLIED TRADES HELPER/SURFACE MAINTENANCE REPAIRER/SURFACE MAINTENANCE MECHANIC, Position Description Number and is part of the CO MATES 64, National Guard.
Summary
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.
This National Guard position is for a ALLIED TRADES HELPER/SURFACE MAINTENANCE REPAIRER/SURFACE MAINTENANCE MECHANIC, Position Description Number and is part of the CO MATES 64, National Guard.
Allied Trades Helper WG-5801-05
The primary purpose of this position is to assist higher graded workers in the skilled trades occupations. Assists shop personnel in the skilled trades occupations by performing the least skilled duties of those trades. Performs common and typical tasks such as mixing paint; preparing surfaces; assisting in minor body and fender work; replacing body components; cleaning equipment; and operating hot water pressure washer and sandblasting equipment. Removes parts on all types of equipment and armament when the work does not require technical knowledge or skill. Supplies, lifts, and holds materials or tools for higher graded workers. Uses hand and powered tools of the trade worked. Performs other duties as assigned.
Surface Maintenance Repairer WG-5801-08
The purpose of this position is to perform limited diagnosis, routine repairs, and maintenance on combat, tactical, commercial, and special purpose vehicles and equipment. Performs limited diagnosis, routine repairs and maintenance on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Performs limited diagnoses to determine the cause of mechanical failures by means of visual and auditory checks and/or uses basic test equipment such as compression testers, voltmeters, ohmmeters and pressure gauges. Removes, replaces, adjusts, cleans and installs parts and components such as wheel seals, switches, sensors, fuel pumps, water pumps, power steering pumps, brakes, filters, radiators, bearings, springs, shock absorbers, wheel cylinders, starter motors, mufflers, battery cables, and other items of similar complexity. Independently performs routine repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems using standard parts. Conducts limited readiness and repair inspections on vehicles and associated equipment supported by the activity. May perform routine maintenance and limited repairs on basic communication equipment such as radios, field telephones, amplifiers, switchboards, recorders, intercoms by removing and replacing components and elements. In conjunction with or in the absence of the Tools and Parts Attendant, may maintain supply documentation, and the receipt, store, issue, and inventory of tools and parts used in the trades operation. Performs other duties as assigned.
Surface Maintenance Mechanic WG-5801-10
The purpose of this position is to perform maintenance, repair, troubleshooting, inspection, and/or overhaul of a variety of combat, tactical, commercial, and special purpose vehicles and equipment. Troubleshoots, performs maintenance and major repairs on heavy-duty mobile equipment, combat, tactical and automotive vehicles. Troubleshoots equipment and diagnoses the cause of mechanical failures by means of visual and auditory checks and/or uses test equipment such as engine analyzers, compression testers, voltmeters, ohmmeters, pressure gauges, and computer diagnostic tools. Removes and disassembles engines and major assemblies, sub-assemblies, components, and fuel, hydraulic, and oil pressure systems. Independently performs repairs and maintenance functions in remote locations that can be accomplished by removing, cleaning, reinstalling, or replacing defective parts of components and systems such as injectors, leaking wheel cylinders, corroded mufflers, fuel tanks, brake cylinders and worn brake shoes, voltage regulators, generators, injector pumps, and fuel pumps. Conducts readiness and repair inspections on vehicles and associated equipment supported by the activity. May maintain and repair electronics communication equipment by removing and replacing components and elements. Assists in the maintenance of production reports and records and makes recommendations to the supervisor. Performs other duties as assigned.
Selectee will be required to wear the military uniform.
Membership in the Colorado Army National Guard.
Must hold the grade of E-2 thru E-7.
Compatible Military Assignment: 12, 13, 14, 19, 25, 88, 91, 92, or 94 series MOS or able to obtain it within one year of hire.
May be required to successfully complete a probationary period.
Participation in direct deposit is mandatory.
Submit all required documentation.
For positions requiring the operation for motor vehicle, candidates must have a valid state driver's license for the state in which they live or are principally employed.
Qualifications
Military Grades: E-2 thru E-7
Compatible Military Assignments: 12, 13, 14, 19, 25, 88, 91, 92, and 94 series MOS or able to obtain it within one year of hire
1. Specialized experience will be used to determine qualifications for the announced position.
2. An applicant's RESUME must provide, in detail, how they meet each specialized experience listed below.
3. It must be documented with "from (mm/yy)" and "to (mm/yy)" dates and description of the specialized experience.
DO NOT copy each bullet listed below word for word and place into your resume; you must describe your personal experience as it pertains to each bullet.
You will be immediately disqualified if you fail to include specialized experience in your resume.
Allied Trades Helper WG-5801-05 must have at least 6 months of Specialized Experience in each of the following:
1. Experience using common hand tools in making repetitive repairs under close supervision.
2. Experience which demonstrates the ability to perform the simpler and routine duties of the trade.
Surface Maintenance Repairer WG-5801-08 must have at least 12 months of Specialized Experience in each of the following:
1. Experience using common hand and power tools and a small variety of test and measurement devices to make mechanical repairs.
2. Experienced removing, adjusting, replacing, cleaning, and installing a variety of parts, components, and accessories.
3. Experience which demonstrates a basic understanding of mechanical, electrical, and hydraulic theory applying to vehicles; and skill to replace, fit, install, and make adjustments.
4. Experience demonstrating an understanding of the makeup and operation of the various individual systems maintained and their interrelationships.
5. Experience reading and interpreting parts lists, manufactures' repair manuals, diagrams, and electrical schematics.
Surface Maintenance Mechanic WG-5801-10 must have at least 18 months of Specialized Experience in each of the following:
1. Experience diagnosing, repairing, overhauling, and modifying more complex vehicles, equipment, and more complicated systems.
2. Experience which has provided a thorough knowledge of diagnostic equipment.
3. Experience applying independent judgment in determining methods and techniques required to solve unusually complex maintenance and repair problems.
4. Experience in testing, inspecting, and evaluating the work performed on vehicles, equipment and systems.
Education
Education cannot be substituted for Specialized Experience for this position.
Additional information
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application.
1. If you would like to inquire about joining the Colorado Army National Guard please contact (720) 250-1351.
2. PCS funds are not available (unless otherwise stated).
3. Be advised that if selected for a military technician position where membership in a reserve component is a condition of employment, your bonus may be terminated and may or may not be subject to recoupment. Questions pertaining to recoupment may be directed to the State Incentives manager at (720) 250-1337.
4. AGR positions are not announced/applied for on USAjobs. Contact your respective AGR offices for instructions on how to apply for AGR positions.
5. A security clearance may be required for this position. Please contact the selecting supervisor or state security manager with questions regarding clearances. (Failure to obtain/maintain a security clearance may be grounds for termination from the Technician program.)
6. Unless stated otherwise: Must be fully qualified or able to obtain MOS within one year hire if this position is listed as immaterial against NGB compatibility requirements. If there is a compatible, required, or restricted MOS listed in this announcement - you will need that MOS to qualify for the position. If this position requires specific ASVAB scores, please contact the selecting supervisor with any questions.
7. This position may be contingent on the vacancy of the incumbent even if not otherwise stated in this announcement. Please contact the HRO with any questions regarding hiring dates.
8. Per ARNG-HRH Policy Memorandum #10-39, mandatory Full Time Staff (FTS) training is required within a year of hire as a condition of employment in vacancy announcements for both Technician and Active Guard Reserve positions. Failure of new FTS personnel to complete NGB prescribed courses at PEC within the first year of employment may be cause for reassignment to other full-time positions or termination of their employment.
9. We use E-Verify to verify the identity and employment eligibility of all persons hired.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How you will be evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you are found to be a minimally qualified candidate, you will be referred to the selecting official for employment consideration.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Failure to submit the required documents will be grounds for disqualification without further review
REQUIRED: A current Resume, providing name, military rank, and email REQUIRED: Specialized experience documented in your resume with mm/yy to mm/yy format REQUIRED: Your DD214 (if available) or Service School Certificate awarding you an MOS REQUIRED: OF 306
If you are relying on your education to meet qualification requirements:
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/11865929
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
CO MATES 64
8700 Butts Rd
Colorado Springs, CO 80913
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
Failure to submit the required documents will be grounds for disqualification without further review
REQUIRED: A current Resume, providing name, military rank, and email REQUIRED: Specialized experience documented in your resume with mm/yy to mm/yy format REQUIRED: Your DD214 (if available) or Service School Certificate awarding you an MOS REQUIRED: OF 306
If you are relying on your education to meet qualification requirements:
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/11865929
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
CO MATES 64
8700 Butts Rd
Colorado Springs, CO 80913
US
Next steps
Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.
Fair and transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
