This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/657774700. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
This position is located in the United States Department of Labor (DOL), Occupational Safety and Health Administration, (OSHA).
06/13/2022 to 07/15/2022
$89,834 - $116,788 per year
GS 12
1 vacancy in the following location:
Yes—as determined by the agency policy.
Occasional travel - 25% or less.
No
Permanent
Full-Time
Competitive
13 - This position has Full-Performance Level (FPL) up to the GS-13 grade level.
No
No
DE-22-BOS-OSHA-488
657774700
Federal employees who meet the definition of a "surplus" or "displaced" employee.
U.S. Citizens, Nationals or those who owe allegiance to the U.S.
U.S. Citizens; Interagency Career Transition Assistance Prog and Career Transition Assistance Prog eligibles in the local commuting area. Also being advertised as job #MS-22-BOS-OSHA-489 for status applicants. To be considered for each, apply to BOTH jobs.
Major duties for this position at the GS-12 level include but are not limited to, the following:
Applicants must meet all legal and regulatory requirements. Reference the "Required Documents" section for additional requirements.
Notification Concerning COVID-19 Vaccinations. As required by Executive Order 14043, Federal executive branch employees are required to be fully vaccinated against COVID-19 regardless of the employee's duty location or work arrangement (e.g., telework, remote work, etc.), subject to such exceptions as required by law. If selected, you will be required to be vaccinated against COVID-19 and to submit documentation of proof of vaccination or to be in the process of requesting an exception to the vaccination requirement before appointment or onboarding with the agency. The agency will provide additional information regarding which forms of documentation can be accepted and how you can request to be considered for a legally required exception from this requirement.
Currently, implementation and enforcement of Executive Order 14043 has been suspended pursuant to an injunction pending further litigation.
Basic Requirements:
Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as
described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor’s degree in engineering, provided the applicant has
had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
In addition to meeting the basic education requirement, applicants must also meet the following Specialized Experience:
To qualify for the GS-12 position:
Applicants must have 52 weeks of specialized experience equivalent to at least the next lower grade level, GS-11, specialized experience is defined as experience in the application of professional electrical engineering concepts, principles, and practices as applied to product safety testing.
Any applicant falsely claiming an academic degree from an accredited school will be subject to actions ranging from disqualification from federal employment to removal from federal service.
If your education was completed at a foreign college or university, you must show comparability to education received in accredited educational institutions in the United States and comparability to applicable minimum course work requirements for this position. Click Evaluation of Foreign Education for more information.
Persons who are deaf, hard of hearing, blind, or have speech disabilities, please dial 711 to access telecommunications relay services.
DOL seeks to attract and retain a high-performing and diverse workforce in which employees' differences are respected and valued to better meet the varying needs of the diverse customers we serve. DOL fosters a diverse and inclusive work environment that promotes collaboration, flexibility, and fairness so that all individuals are able to participate and contribute to their full potential.
Refer to these links for more information: GENERAL INFORMATION, ADDITIONAL DOCUMENTATION, FORMER FEDERAL EMPLOYEES
You will be evaluated for this job based on how well you meet the qualifications above.
If you meet the minimum qualifications, you will be evaluated against the evaluation factors below and will be placed into a category based on your vacancy question responses.
Categories
Category A (Best Qualified) - Meets the basic qualification requirements for the vacancy and has successful experience in the same or similar job that has demonstrated superior proficiency in applying critical competencies required by this position to work of increased levels of difficulty and complexity.
Category B (Well Qualified) - Meets the basic qualification requirements for the vacancy and demonstrates satisfactory proficiency in the critical competencies required by this position.
Category C (Qualified) - Meets the specialized experience described in the minimum qualifications requirements section of this announcement and demonstrates proficiency in the basic competencies.
Evaluation Factors (Competencies) - All qualified applicants will be evaluated on the following key competencies:
Electrical Engineering - Knowledge of the concepts, principles, theories, and methods related to the design, analysis, test, fabrication, or verification of analog or digital electronic systems.
Problem Solving - Identifies problems; determines accuracy and relevance of information; uses sound judgment to generate and evaluate alternatives, and to make recommendations.
Planning and Evaluation - Organizes work, sets priorities, and determines resource requirements; determines short- or long-term goals and strategies to achieve them; coordinates with other organizations or parts of the organization to accomplish goals; monitors progress and evaluates outcomes.
Technical Competence - Uses knowledge that is acquired through formal training or extensive on-the-job experience to perform one's job; works with, understands, and evaluates technical information related to the job; and advises others on technical issues
The information you provide on your resume may be verified by a review of your work experience, employment start/end dates/hours worked and/or education, by checking references and through other means (ex. interview). The examining Office of Human Resources (OHR) makes the final determination concerning applicant ratings. Your resume MUST provide sufficient information to substantiate your responses to the vacancy questions. If not, the OHR may amend your responses to more accurately reflect the level of competency indicated by the content of your resume. Your evaluation may also include a review by a Human Resources Specialist or panel and may include other assessments (ex. interview, panel review, written test, writing sample, etc.)
INFORMATION FOR ICTAP/CTAP ELIGIBLE(S) ONLY: If you are eligible for special priority selection under ICTAP/CTAP, you must be well-qualified for the position to receive consideration. ICTAP/CTAP eligible(s) who are placed into Category B or higher will be considered "well-qualified." Be sure to review DOL Account Eligibility Questions #24 to reflect that you are applying as an ICTAP or CTAP eligible and submit supporting documentation. Click Application of Veterans Preference for Category Rating Jobs for more information.
The following documents must be submitted by 11:59 p.m. (ET) on the vacancy closing date. You are not required to submit a document if it does not apply to you. Warning: If you submit a document using the same document title, the 2nd submission will OVERWRITE the 1st submission. Also, do not upload password-protected documents.
- Veterans Documents (if applicable): To be considered as a 5-point preference eligible, you must submit a copy of your Certificate of Release or Discharge From Active Duty, DD214. Your DD-214 must show the type of discharge and dates of active duty. To claim 10-point preference, you must submit a copy of your DD214; an Application for 10-point Veteran's Preference, SF15; and the proof of entitlement of this preference which is normally an official statement, dated 1991 or later, from the Department of Veterans Affairs certifying to the present existence of the service-connected disability and indicating the percentage of your disability. (For active duty service members expecting honorable or general discharge or release within 120 days, click Active Duty). Without this documentation, you will not receive veteran's preference. For more information, go to https://www.fedshirevets.gov
- Displaced Employee Placement Documents – Only required if requesting priority consideration under CTAP or ICTAP eligibility.
Unofficial Transcript(s) (in English) - If you are using education as a basis for qualifying for this position, you must submit all applicable academic transcripts demonstrating that you meet the qualifying educational requirements (ex. BA/BS, MA, JD, Ph.D., etc.). If specific coursework is required to qualify, you must supply an unofficial transcript from each academic institution in which the required courses were taken in order to receive credit.
You may upload your unofficial transcript(s) as one document (3 MB size limit). If over 3 MB, please submit via fax feature.
NOTE: The OFFICIAL Transcript(s) MUST BE RECEIVED, if you are selected, and prior to receiving the firm offer with a start date.
Reference the “Education Section” for College Transcript and Evaluation of Foreign Education.
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the initial online application, including submission of the required documentation specified in the "Required Documents" section.
Follow the steps below to apply. Your application and ALL required supplemental documents MUST be received by 11:59 pm Eastern Time (ET) on the vacancy closing date to receive consideration. Paper applications and supplemental documents submitted in any other manner without prior approval from the vacancy contact will not be considered. Click here for information on Reasonable Accommodations.
SAVE your information before the 30 MINUTE TIMEOUT! For help, go to USAJOBS Help Center.
STEP 1 - Create USAJOBS Account on www.usajobs.gov, including Resume and Saved Documents Your resume must provide sufficient information to substantiate your responses to the self-assessment vacancy questions. If not, HR may amend your responses to more accurately reflect the competency indicated by resume content. FOR EACH EMPLOYMENT PERIOD, include: start/end month & year and note full-time or part-time (if part-time, include # of hours worked per week); otherwise, your application may be considered incomplete.
STEP 2 - Complete the 1st part of the application process (USAJOBS) Once you have identified a job on USAJOBS that you wish to apply for, click on the title and click the "Apply" button. For questions about the vacancy, contact the Agency Contact at the bottom of the announcement. Click “Start Application” and proceed through the 5 steps noted at the top of the USAJOBS page. You will be able to select a resume and documents from your USAJOBS Account that you can submit as a package as part of your DOL application. At Step 5, click “Continue to Agency Site”.
STEP 3 – Complete the 2nd part of the application process (DOL) On the Department of Labor (DOL) page, create a DOL Account if you have not already and click “APPLY TO THIS VACANCY”. Continue through the 7 progress steps indicated by circles at the top of the DOL page. The 3rd progress step is where you answer the vacancy specific questions. The 4th progress step "Documents" is where you submit required documents (only if applicable to you) specified in the "Required Documents" section of this vacancy. If you submit a document using the same document title, the 2nd submission will OVERWRITE the 1st submission.
STEP 4 – On the “Review and Submit” step, click “Submit Application” The last “Confirmation” step will turn green noting that your application was submitted successfully.
STEP 5 - Edit Application as needed by 11:59 pm ET of Closing Date by returning to USAJOBS, clicking the vacancy, then “Update Application”.
Once your complete application is received, we will conduct an evaluation of your qualifications and refer candidates for selection consideration. Candidates will be referred to the hiring manager for further consideration and possible interview. You will be notified of the outcome. A selection is expected to be made within 30 calendar days from the issuance date of the certificate.
For instructions on how to check the status of your application, go to: USAJOBS Help Guide.
USAJOBS will no longer send status alert email notifications. You can check your application status in the TAS by logging into USAJOBS and in the Applicant Dashboard, click the hiring agency Talent Acquisition System (TAS). If the TAS does not provide application tracking information, contact the agency point of contact on the job announcement.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/657774700. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Learn more about