This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/724304000. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
As a Mechanical Engineer, you will serve as an expert advisor to management on vehicle engineering technical specifications.
Location of position: CO/Purchasing Div/Vehicle Engineering Branch. Position is Category 3. Location to be determined when selection is made.
We are currently filling one vacancy, but additional vacancies may be filled from this announcement as needed.
05/08/2023 to 05/19/2023
$98,496 - $158,432 per year
GS 13
Yes
Not applicable, this is a remote position.
No
Permanent
Full-time
Competitive
13
No
No
23FASB246TJMP
724304000
Current or former competitive service federal employees.
Federal employees who meet the definition of a "surplus" or "displaced" employee.
Certain current or former term or temporary federal employees of a land or base management agency.
Family members of a federal employee or uniformed service member who is or was, working overseas.
Individuals eligible under a special authority not listed above, but defined in the federal hiring regulations.
Your application will be considered if you are a: Current career/career-conditional Federal employee in the competitive service; Reinstatement eligible; Special Appointing Authority eligible; VEOA eligible Veteran; ICTAP eligible; or OPM Interchange Agreement eligible.
You will be responsible for:
If selected, you must meet the following conditions:
For each job on your resume, provide:
If you have volunteered your service through a National Service program (e.g., Peace Corps, Americorps), we encourage you to apply and include this experience on your resume.
For a brief video on creating a Federal resume, click here.
The GS-13 salary range starts at $94,373 per year. If you are a new federal employee, your starting salary will likely be set at the Step 1 of the grade for which you are selected.
BASIC REQUIREMENTS FOR ENGINEERS: A Degree in professional engineering OR a combination of college level education, training, and/or technical experience. For specifics on qualifying education and/or experience use the following link: Basic Requirements for Engineer Positions.
Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor’s degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) and in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. (Must provide with your application.)
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. (Must provide with your application.)
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements in the above paragraph. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in the above paragraph.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor’s degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
In addition to meeting the basic requirement above:
SPECIALIZED EXPERIENCE:
In addition to the Basic Requirements listed above, to qualify, you must have at least one year of specialized experience equivalent to the GS-12 level or higher in the Federal service. Specialized experience is experience applying a technical knowledge of mechanical engineering principles, techniques, methods, and precedents gained in performing technical work in functions such as automotive engineering principles to perform in-depth analysis on a variety of highly complex motor vehicle designs, initiating and/or leading projects involving the evaluation of fleet purchase descriptions, performance and inspections to design and construct final motor vehicle builds.
Note: If you are using foreign education to meet qualification requirements, you must send a Certificate of Foreign Equivalency with your transcript in order to receive credit for that education. For further information, visit: https://www2.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html
If you are selected at a grade lower than the full performance level, you may be promoted up to that grade level without having to re-apply or compete against other applicants.
Additional vacancies may be filled from this announcement as needed; through other means; or not at all.
Additional vacancies may be filled through this announcement in this or other GSA organizations within the same commuting area.
We are also accepting applications from all U.S. Citizens and Nationals under Vacancy Announcement # 23FASB247ABGDE. You must apply separately to each announcement to be considered for both.
You will be evaluated for this job based on how well you meet the qualifications above.
You will be evaluated on the questions you answer during the application process, which will measure your overall possession of the following competencies or knowledge, skills, and abilities. Your responses to these questions must be supported by your resume or your score may be lowered.
Additional hurdle assessments, such as narrative responses or other assessments, may be administered to applicants who meet the requirements of the first hurdle, e.g., the minimum qualification requirements. If additional assessments are used, you will be provided with further instructions.
Consideration will be given to performance appraisals and incentive awards in merit promotion selection decisions in accordance with 5 CFR 335.103(b)(3). You should list any relevant performance appraisals and incentive awards in your resume so that information will be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.
If you are eligible under Interagency Career Transition Assistance Plan or GSA’s Career Transition Assistance Plan(ICTAP/CTAP), you must receive a score of 85 or higher to receive priority.
ALL required documents must be submitted before the closing date. Review the following list to determine what you need to submit.
Your resume showing applicant's name, email address, work schedule, hours worked per week, dates of employment and duties performed.
Note: If required to submit an SF-50 (Notice of Personnel Action), an equivalent agency Notice of Personnel Action form is acceptable. The SF-50 or equivalent agency Notice of Personnel Action form must show all of the following: effective date, position, title, series, grade, and rate of basic pay, tenure group 1 (career) or 2 (career-conditional), position occupied group, and name of agency. If you are a GSA employee (except in the OIG), you are not required to submit an SF-50.
If you are a 30% or more disabled veteran, VEOA or VRA applicant or qualified spouse, widow/widower, or parent:
(a) Copy of your Certificate of Release or Discharge From Active Duty, DD-214 that shows your type of discharge and the dates of your active duty service.
(b) If you are a disabled veteran, or are applying under VRA or VEOA as a spouse, widow/widower, or parent of a veteran, submit both of the following in addition to the DD-214: (1) completed SF-15 form; and (2) proof of your entitlement (refer to SF-15 for complete list).
If you are active duty military- Certification on a letterhead from your military branch that includes your rank, character of service (must be under honorable conditions) & military service dates including discharge/release date (must be no later than 120 days after the date the certification is submitted).
If you are a current Federal employee or Reinstatement Eligible: Submit your latest SF-50.
If you are eligible under an Interchange Agreement: Submit your latest SF-50.
If you are a former Peace Corp or VISTA volunteer: Submit your Description of Service.
If you are a current or former Land Management Agency Employee - Submit a and b:
(a) one or more SF-50s, including your most recent one that shows you were on a competitive time-limited appointment(s) with a Land Management Agency and served on the appointment for a period(s) totaling more than 24 months without a break of 2 or more years.
(b) Copy of your agency’s annual performance appraisal(s) or written reference(s) from a supervisor at the agency verifying satisfactory performance during your appointment(s).
If you have a disability: Submit proof of eligibility. For information on eligibility and required documentation, refer to USAJOBS’s People With Disabilities page.
If you are applying under another special appointment authority: Submit proof of your eligibility under the appropriate appointment authority. See USAJOBS for more information.
If you are ICTAP/CTAP eligible - submit a, b, and c: (a) proof of eligibility including agency notice; (b) SF-50, and (c) most recent performance appraisal.
If you are a current or former political appointee: Submit your SF-50.
College transcripts: If you are using some or all of your college education to meet qualification requirements for this position, you must submit a photocopy of your college transcript(s). Transcripts MUST show: name of the institution, student's name, course work/degree(s) completed/conferred and dates. If selected, an official transcript will be required prior to appointment.
For education completed outside the United States, also submit a valid foreign credential evaluation that substantiates possession of the required education.
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
Submit a complete online application including any required documents prior to 11:59 pm Eastern Time on the closing date of the announcement. You can modify or complete your application any time before the deadline. Simply return to USAJOBS, select the vacancy, and update your application. For more detailed instructions on how to apply, click here: Apply for a GSA Job.
To begin, click the Apply Online button on the vacancy announcement.
Need Assistance in Applying? Contact the HR representative listed on the announcement prior to the application deadline. We are available to assist you Monday-Friday during normal business hours. You must receive HR approval before deviating from these instructions. Be sure to APPLY EARLY as most assessments must be completed fully and submitted before the announcement closing.
After the closing date/deadline:
Thank you for your interest in working for U.S. General Services Administration!
STANDING REGISTER
The following process is used if your application is complete and active as of the cut-off date deadline.
Thank you for your interest in working for U.S. General Services Administration!
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
This job originated on www.usajobs.gov. For the full announcement and to apply, visit www.usajobs.gov/job/724304000. Only resumes submitted according to the instructions on the job announcement listed at www.usajobs.gov will be considered.
Learn more about