Skip to main content
U.S. flag

Mechanical Engineer

Department of the Interior
U.S. Fish and Wildlife Service
This job announcement has closed

Summary

This position is a Mechanical Engineer, GS- 0830-12 working in Albuquerque, New Mexico for the R2-Division of Facilities Management.

This position is also open to status candidates under announcement R2-22-11272780-SG (MP). You must apply to each announcement separately if you wish to be considered under both recruitment methods.

Overview

Help
Hiring complete
Open date: 10/25/2021
Closed date: 11/08/2021
Location
1 vacancy in the following location:
Work site options
Telework eligible
Yes—as determined by the agency policy.
Relocation expenses reimbursed
No
Salary
$77,976 - $101,373 per year
Pay scale & grade
GS 12
Promotion potential
12
Pay scale and grade determines the salary of the job.
Work schedule
Full-time
Travel Required
Occasional travel - You may be expected to travel for this position.
Appointment type
Permanent
Occupations and job series
Supervisory status
No
Federal service type
This job is in the Competitive Service
Drug test
No
Security clearance
Other
Position sensitivity and risk
Moderate Risk (MR)
Jobs require a background check and some require a security clearance. The type depends on the job.
Background check type
Announcement number
R2-22-11272783-SG (DE)
Control number
618755000

Duties

Help

As a Mechanical Engineer your duties will include but are not limited to the following:

  • Identify project needs and prepare preliminary designs, conceptual studies, cost estimates, scopes of work, etc.
  • Prepare final design drawings, specifications, etc. for HVAC systems, waste and water treatment systems, hydraulic power/control systems, and electrical systems.
  • Inspect construction projects, resolve design problems, verify operation and installation of systems and instruct operating personnel in use its use. Act as Contracting Officer's Technical Representative (COTR) for projects.

Requirements

Help

Conditions of employment

  • Must be a U.S. Citizen or National.
  • Individuals assigned male at birth after 12-31-59 must be registered for the Selective Service. To verify registration visit SSS.gov.
  • Resume and supporting documents (See How To Apply).
  • Suitability for employment, as determined by background investigation.
  • Driver's License: Selectees must possess and maintain a valid State driver's license at all times during their tenure.
  • Probationary Period: Selectees may be required to successfully complete a probationary period.
  • Notice of Financial Disclosure Report Requirement: This position is subject to a financial disclosure requirement and you will be required to complete either OGE Form 278e or OGE Form 450 as applicable within 30 days of your appointment

Qualifications

Only experience and education obtained by 11/08/2021 will be considered.

In order to qualify for this position you must possess both the Basic Requirement and Minimum Qualification.

Basic Requirement:
A. I have a degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. I have a combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Minimum Qualification [GS-12]
I have at least one full year of specialized experience equivalent to the GS-11 level in the federal service. Examples of specialized experience may include: (1) serving as a project consultant, project manager, and/or advisor on all aspects of assigned facilities engineering, including related professional engineering and architectural management; (2) reviewing designs and proposals and recommendations of waivers of criteria based on engineering/architectural judgment and economic analyses; (3) participating in reviews of bids, contractor proposals, contract specifications and designs, as well as contract negotiations and technical and business discussions with contractor; (4) provides on-the-ground inspection services, documents and monitors construction activities, reviews As-built drawings to assure accuracy before final acceptance and assures all warranty work is completed to applicable building code standards. NOTE: Your resume must contain sufficient details, e.g., work schedule, mm/yy dates, etc., to prove you have performed these duties for one (1) year.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

PROOF OF EDUCATION: All applicants who are using education or a combination of education and experience to qualify must submit copies of official or unofficial transcripts which include grades, credit hours earned, major(s), grade point average or class ranking, institution name, and student name. If any required coursework is not easily recognizable on transcripts, or if you believe a portion of a particular course can be credited toward meeting an educational requirement, you must also provide a memorandum on letterhead from the institution's registrar, dean, or other appropriate official stating the percentage of the course that should be considered to meet the requirement and the equivalent number of units. Unofficial transcripts are acceptable; however, if you are selected for the position, you will be required to produce the original official transcripts.

PASS/FAIL COURSES: If more than 10 percent of your undergraduate course work (credit hours) were taken on a pass/fail basis, your claim of superior academic achievement must be based upon class standing or membership in an honor society.

GRADUATE EDUCATION: One academic year of graduate education is considered to be the number of credits hours your graduate school has determined to represent one academic year of full-time study. Such study may have been performed on a full-time or part-time basis. If you cannot obtain your graduate school's definition of one year of graduate study, 18 semester hours (or 27 quarter hours) should be considered as satisfying the requirement for one year of full-time graduate study.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html

Additional information

Vaccination: As required by Executive Order 14043, Federal employees are required to be fully vaccinated against COVID-19 regardless of the employee's duty location or work arrangement (e.g., telework, remote work, etc.), subject to such exceptions as required by law. If selected, you will be required to be vaccinated against COVID-19 and submit documentation of proof of vaccination by November 22, 2021 or before appointment or onboarding with the U.S. Fish and Wildlife Service (FWS), if after November 22. FWS will provide additional information regarding what information or documentation will be needed and how you can request a legally required exception from this requirement.

For additional information regarding limited circumstances where the law requires an exception please visit the Safer Federal Workforce website.

Due to COVID-19, the FWS is currently in an expanded telework posture. If selected, you may be expected to temporarily telework, even if your home is located outside the local commuting area. Once employees are permitted to return to the office, you may be expected to report to the duty station listed on this announcement within 30 days. At that time, you may be eligible to request to continue to telework one or more days a pay period depending upon the terms of the Department of the Interior's telework policy.
PCS INFORMATION: No PCS entitlements authorized.

Telework: This position is suitable for telework and may be allowed to telework with supervisory approval.

Additional Vacancies: One or more positions may be filled from applications received under this announcement in the advertised office or other U.S. Fish & Wildlife Service offices in the local commuting area.

Career Transition Assistance Plan (CTAP) or Interagency Career Transition Assistance Plan (ICTAP):Department of Interior (DOI) Career Transition Assistance Plan (CTAP) procedures apply in filling this vacancy. CTAP/ICTAP provides placement assistance to permanent Federal employees who are surplus, displaced, or involuntarily separated. Applicants claiming CTAP/ICTAP eligibility must submit a copy of their most recent performance appraisal, proof of eligibility, and most current SF-50 noting position, grade level, and duty location with their application. To be considered under CTAP/ICTAP, applicants must be well-qualified (i.e., meet the minimum qualification requirements, including any selective placement factors; education, and experience requirements), score at least 85 on the assessment questionnaire, and be able to perform the duties of the position upon entry. For information on CTAP and ICTAP click here

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

You will be evaluated based on how well you meet the qualifications listed in this vacancy announcement. Your qualifications will be evaluated based on your application materials (e.g., resume, supporting documents), the responses you provide on the application questionnaire, and the result of the online assessments required for this position. You will be assessed on the following competencies (knowledge, skills, abilities, and other characteristics):

  • Knowledge of planning and design processes in order to estimate type and quantity of professional, technical, and administrative input required for engineering services, and to evaluate the technical quality of products.
  • Ability to communicate technical information.
  • Professional knowledge of related engineering fields such as architectural, civil, environmental and structural.
  • Knowledge of Federal Acquisition Regulations (FAR) as they pertain to design, construction, and A-E contracts.
  • Attention to Detail
  • Customer Service
  • Flexibility
  • Integrity/Honesty
  • Interpersonal Skills
  • Learning
  • Reading
  • Reasoning
  • Self-Management
  • Stress Tolerance
  • Teamwork

In order to be considered for this position, you must complete all required steps in the process. In addition to the application and application questionnaire, this position requires an online assessment. The online assessment measures critical general competencies required to perform the job.

Overstating your qualifications and/or experience in your application materials or application questionnaire may result in your removal from consideration. Cheating on the online assessment may also result in your removal from consideration. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

All qualified candidates will be assigned to a quality category. The category assignment is a measure of the degree in which your background matches the competencies required for this position. The category ratings for this position are: Best Qualified, Well Qualified, and Qualified

The category rating process protects the rights of veterans by placing them ahead of non-preference eligibles within each quality category. Veterans' preference eligibles who meet the qualification requirements and who have a compensable service-connected disability of at least 10 percent will be listed in the highest quality category (except in the case of scientific or professional positions at the GS-09 level or higher).

U.S. Fish and Wildlife Service

You too can make a difference in our world. The work of the U.S. Fish & Wildlife Service is meaningful and varied. Want to know more about what it is like to work for us? Click here to watch short videos: Meet Your New Boss and Diversity is our Strength.

The Department of the Interior (DOI) places a high value on diversity of experience and cultural perspectives and encourages applications from all interested eligible candidates. Diversity, equity, inclusion, and accessibility (DEIA) are fundamental principles that guide the Department and allow us to successfully achieve our mission.

Agency contact information

Human Resources Staffing Division
Phone
833-512-0482
Email
fwshiring@fws.gov
Address
Division of Human Resources
Division of Human Resources
500 Gold Avenue, SW Room 5222
Albuquerque, NM 87103
US

Visit our careers page

Learn more about what it's like to work at U.S. Fish and Wildlife Service, what the agency does, and about the types of careers this agency offers.

https://www.fws.gov/

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.