Skip to main content
U.S. flag

Nondestructive Tester

Department of the Army
U.S. Army Aviation and Missile Command
Corpus Christi Army Depot

Summary

About the Position: The mission of the Corpus Christi Army Depot is to overhaul, repair, modify, retrofit, test and modernize helicopters, engines and components for all services and foreign military customers. Corpus Christi Army Depot (CCAD) is the Army's Center of Industrial and Technical Excellence for Rotary Wing Aviation Maintenance.

Overview

Help
Accepting applications
Location
Few vacancies in the following location:
Work site options
Telework eligible
No
Remote job
No
Relocation expenses reimbursed
No
Salary
$32.46 - $41.37 per hour
Pay scale & grade
WG 9 - 11
Promotion potential
11
Pay scale and grade determines the salary of the job.
Work schedule
Full-time
Travel Required
Occasional travel - You may be expected to travel up to 5% for this position.
Appointment type
Permanent
Occupations and job series
Supervisory status
No
Federal service type
This job is in the Competitive Service
Represented by a union
No
Drug test
Yes
Security clearance
Not Required
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Jobs require a background check and some require a security clearance. The type depends on the job.
Background check type
Financial disclosure required
No
Some jobs require financial disclosure to identify conflicts of interests.
Announcement number
MCGP-26-13114242-IMP
Control number
893131300

Duties

Help
  • This is a developmental position. If the selection should be at the lower grade level the incumbent will perform duties under closer than normal supervision. Assignments become progressively more difficult until the full performance level is reached.
  • Use RT methods determine the precise type, magnitude, and orientation of defects such as cracks, porosity, inclusions, incomplete fusion, shrinkage, segregation, incorrect assembly, and other anomalies.
  • Responsible for processing radiographic film and/or paper for either automated or manual methods of film processing as required.
  • Using UT methods determines the precise type, magnitude, and orientation of defects such as cracks, inclusions, incomplete fusion, delaminations, and other anomalies.
  • Perform EC test examinations using single and double absolute coils and self-comparison and external comparison differential coils on aircraft electrically conductive nonmetallic structures and metallic products.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • Must be willing to undergo a pre-employment drug test screening, and random testing thereafter.
  • This position requires a personnel security background check (Tier 1 – Non-Sensitive, Low Risk).
  • Must be willing to undergo a physical examination initially, and annually thereafter.
  • Must be willing to travel on Temporary Duty (TDY) up to 5% of the time.
  • Must be able to lift up to 35 lbs.
  • At Grade 10, this position requires at least one valid NDT Level I certification and at least 2 Level II certifications in the following: radiographic (RT), Ultrasonic (UT), and Eddy Current (EC) methods of "Non-Destructive Testing" (NDT).
  • At all grade levels, this position requires a valid NDT Level II certification in Magnetic Particle (MT), and Fluorescent Penetrant Inspection (PT) methods of "Non-Destructive" (NDT) inspection.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.

  • Current Civilian Employees of the Command
  • Interagency Career Transition Assistance Plan
  • Land Management Workforce Flexibility Act
  • Military Spouses, under Executive Order (E.O.) 13473
  • Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible
  • Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible
  • Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement
  • Priority Placement Program, DoD Retained Grade Preference Eligible
  • Veterans Employment Opportunity Act (VEOA) of 1998


Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience.

There is no specific length of training or experience required. However, you must be able to demonstrate, through experience shown in your written application materials that you possess the sufficient knowledge, skills, and abilities to successfully perform the work of this position without more than normal supervision.

Minimum Qualifications WG-09 (Screen Out Element): Ability to do the work of an Nondestructive Tester without more than normal supervision. Can interpret and identify indications that are the result of discontinuities such as cracks, pipe, inclusions, nonmetallic stringers or forging bursts; and then accepts or rejects parts in accordance with authorized acceptance criteria; and set up, calibrate, and safely operate fluorescent penetrate inspection equipment such as spray guns, dip tanks, wash booths, dryers, pressure flow meters, optical magnifiers, and other manual and automatic processing equipment. - Failure to meet this Screen Out Element will result in an ineligible rating.

Minimum Qualifications WG-10 (Screen Out Element): Ability to do the work of an Nondestructive Tester without more than normal supervision. Perform under the guidance of a Level II operator, the trainee is responsible for Radiographic (RT), Ultrasonic (UT), and Eddy Current (EC) method of NDT inspection requiring setup, calibration, and safe operation of test equipment for each area. - Failure to meet this Screen Out Element will result in an ineligible rating.

Minimum Qualifications WG-11 (Screen Out Element): Ability to do the work of an Nondestructive Tester without more than normal supervision.
Setup and safe operation of both conventional and real time X-ray machines to make RT exposures of aircraft nonmetallic structures and metallic castings, forgings, weldments, other wrought products; and using UT methods determines the precise type, magnitude, and orientation of defects such as cracks, inclusions, incomplete fusion, delamination, and other anomalies. - Failure to meet this Screen Out Element will result in an ineligible rating.

Selective Placement Factor #1 WG-11: This position requires a valid Non-Destructive Tester (NDT) Level II certification in Magnetic Particle (MT), Fluorescent Penetrant Inspection (PT) of Non-Destructive Tester (NDT) inspection and NDT Level II certifications in Radiographic (RT), Ultrasonic (UT), and Eddy Current (EC) methods of Non-Destructive Testing (NDT) in order to accomplish the duties of PD AA09324. In accordance with NAS 410 (NAS Certification and Qualification of Nondestructive Test Personnel and CCAD 702-52.

Selective Placement Factor #2 WG-11: Using UT methods determines the precise type, magnitude, and orientation of defects such as cracks, inclusions, incomplete fusion, delaminations, and other anomalies. Responsible for Eddy current (EC) method of NDT requiring setup, calibration, and safe operation of EC test equipment using surface, encircling and inside coils and gap probes with analog and impedance plane display instruments. Responsible for Radiographic (RT) methods of NDT inspection requiring setup and safe operation of both conventional and real time X-ray machines to make RT exposures of aircraft nonmetallic structures and metallic castings, forgings, & weldments.

  • Ability To Do The Work Of The Position Without More Than Normal Supervision Screen Out
  • Ability to Interpret Instructions, Specification, etc. (includes blueprint reading)
  • Ability To Use and Maintain Tools and Equipment
  • Dexterity and Safety
  • Knowledge of Metals
  • Technical Practices (theoretical, precise, artistic)
  • Use of Measuring Instruments
  • PHYSICAL EFFORT: Work in this trade requires the worker to stand, stoop, bend, and reach. The worker will frequently handle items weighing up to 10 pounds and often lift and carry assemblies weighing up to 35 pounds without assistance. Hoists, hand trucks, lifts, and other employees are available to assist when handling heavy or awkward items. Eye fatigue occurs from working under black light and viewing radiographs. The worker is required to pass annual vision tests for acuity and color perception.
  • WORKING CONDITIONS: Works is clean, well-lighted and well-ventilated production shop areas. Wears safety shoes, glasses and other protective clothing as required. Exposed to solutions and generally oily parts which may cause dermatitis or allergy conditions. Wears protection clothes as working conditions may warrant. Although working behind appropriate shielding, this worker must operate equipment, which produce ionizing radiation for which some exposure is possible. Working conditions have been considered in the evaluation of this position.

Education

This job does not have an education qualification requirement.

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • Direct deposit of pay is required.
  • This is a Materiel Maintenance Management Career Program position aligned under the Logistics Career Management Directorate.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.
  • Further certification from this announcement may take place up to 90 days beyond the closing date of this announcement.
  • This position requires a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.

You may claim Military Spouse preference.

Military Spouse Preference (MSP) applicants will receive preference consideration and will be placed (if selected) at the highest grade for which they have applied and are determined best qualified, up to and including the full performance level.

You may claim Priority Placement Program (PPP) preference.

DoD Priority Placement Program (PPP) Applicants will receive preference consideration at the full-performance grade level only.

Only MSP/PPP applicants currently occupying a formal training program position are entitled to exercise their priority status.

Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.

U.S. Army Aviation and Missile Command

Civilian employees serve a vital role in supporting the Army mission. They provide the skills that are not readily available in the military, but crucial to support military operations. The Army integrates the talents and skills of its military and civilian members to form a Total Army.

Looking to make a difference? Join our team!

Army Materiel Command (AMC) is the Army's primary logistics and sustainment command, responsible for managing the global supply chain and ensuring installation and materiel readiness across the Total Force.

AMC is one of the Army's largest commands with nearly 165,000 military, Army Civilian and contractor employees, impacting all 50 states and more than 150 countries. Since 1962, AMC has played a significant role in supplying our forces during wars, conflicts and contingencies, and providing humanitarian aid and disaster relief. From managing the Army's global supply chain to providing quality of life programs for Soldiers and families; from providing financial management and contracting capabilities to leading the way in data analytics, AMC's missions are wide ranging and critical.

AMC's workforce is at the core of the command's support to the Warfighter. If you are ready to take your career to the next level and be part of a culture that puts people first, we have an extensive array of career paths available. Join today and be the power behind ensuring the best equipped and sustained fighting force in the world.

Agency contact information

Army Applicant Help Desk
Website
https://portal.chra.army.mil/hr_public?id=app_inq
Address
GP-W0MUAA USA AMCOM CORPUS CHRISTI ARMY DEPOT
DO NOT MAIL
Corpus Christi, TX 78419
US

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.