Skip to main content
U.S. flag

Aircraft Overhaul Inspector

Department of the Army
U.S. Army Aviation and Missile Command
Corpus Christi Army Depot

Summary

About the Position: The mission of the Corpus Christi Army Depot is to overhaul, repair, modify, retrofit, test and modernize helicopters, engines and components for all services and foreign military customers. Corpus Christi Army Depot (CCAD) is the Army's Center of Industrial and Technical Excellence for Rotary Wing Aviation Maintenance. We provide worldwide on-site maintenance services, aircraft crash analysis, lubricating oil analysis, and chemical, metallurgical and training support.

Overview

Help
Accepting applications
Location
1 vacancy in the following location:
Work site options
Telework eligible
No
Remote job
No
Relocation expenses reimbursed
No
Salary
$35.39 - $41.37 per hour
Pay scale & grade
WG 11
Promotion potential
None
Pay scale and grade determines the salary of the job.
Work schedule
Full-time
Travel Required
25% or less - You may be expected to travel for this position.
Appointment type
Permanent
Occupations and job series
Supervisory status
No
Federal service type
This job is in the Competitive Service
Represented by a union
No
Drug test
Yes
Security clearance
Not Required
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Jobs require a background check and some require a security clearance. The type depends on the job.
Background check type
Financial disclosure required
No
Some jobs require financial disclosure to identify conflicts of interests.
Announcement number
MCGP-26-13113117-IMP
Control number
892990300

Duties

Help
  • Perform Quality Control inspections and evaluations of depot and/or contractor performed aircraft maintenance and repair, in support of organizational, intermediate and/or depot maintenance on aircraft types assigned.
  • Inspect aircraft landing gear, power trains, drive trains, fuel, hydraulic, flight controls, oil, heating/ventilation, pressurization, rigging/control, main and tail rotor systems, engine assemblies, tail-booms, a/c and associated airframe systems.
  • Assure all maintenance and/or repairs accomplished meet established quality control criteria and conformance with current technical data, Aviation Safety Action Messages(ASAM), Aviation Maintenance Action Message (AMAM), and Safety of Flight (SOF).
  • Review requests for Material Review Board(MRB), Quality Deficiency Report/Equipment Improvement Recommendations (QDR/EIR), and/or proposed revisions to Computer Aided Process Planning (CAPP) and other publications.
  • Make recommendations for actions, corrections, or improvements, such as changes to publications, work procedures, and processing.
  • Require an extensive knowledge and understanding of the methods and techniques, tools and equipment used in repairing, modifying or overhauling a variety of rotary wing aircraft.
  • Knowledge of quality inspection methods and techniques to determine serviceability and prepare a report of finding.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by T1 completed background investigation.
  • This position requires a pre-employment physical.
  • Appointment to this position is subject to a one year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 11.
  • This position requires shift work to provide coverage on evenings, weekends, holidays, or special situations. Employee shifts are rotated on a regularly scheduled basis.
  • This position is subject to a pre-employment screening, and random testing thereafter, to include testing based on reasonable suspicion and testing due to direct involvement with an on-duty accident.
  • Travel may be required up to 25% of the time.
  • If you misrepresent your experience/education or provide false/fraudulent information in/with your application, it may be grounds for not hiring you or for firing you. Making false/ fraudulent statements also may be punishable by fine/imprisonment.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.

  • Current Civilian Employees of the Command
  • Interagency Career Transition Assistance Plan
  • Land Management Workforce Flexibility Act
  • Military Spouses, under Executive Order (E.O.) 13473
  • Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible
  • Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible
  • Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement
  • Priority Placement Program, DoD Retained Grade Preference Eligible
  • Veterans Employment Opportunity Act (VEOA) of 1998



Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience.

There is no specific length of training or experience required. However, you must be able to demonstrate, through experience shown in your written application materials that you possess the sufficient knowledge, skills, and abilities to successfully perform the work of this position without more than normal supervision.

Minimum Qualifications (Screen Out Element): Ability to do the work of an Aircraft Overhaul Inspector without more than normal supervision. I have the ability to perform common Aircraft Overhaul Inspector tasks to include: ability to inspect, remove major components from malfunctioning aircraft to determine serviceability or replacement. I have assembled systems, assemblies, sub-assemblies, and components on rotary wing aircrafts. I work under normal supervision of a work leader or journey-level employee who observes tasks in progress and upon completion to make sure they are properly formed. - Failure to meet this Screen Out Element will result in an ineligible rating.

  • Ability To Inspect
  • Ability to Interpret Instructions, Specification, etc. (includes blueprint reading)
  • Ability To Use and Maintain Tools and Equipment
  • Knowledge of Equipment Assembly, Installation, Repair, etc.
  • Technical Practices (theoretical, precise, artistic)
  • Trouble shooting
  • Use of Measuring Instruments
  • Physical Efforts: May require long periods of walking, and standing. May be required to lift up to 35 pounds without assistance, and over 35 pounds with assistance from another worker or weight handling equipment. Required to climb on, stand, stoop, and crouch in uncomfortable positions for extended periods of time.
  • Working Conditions: Work is normally performedin adequately lighted, heated, and ventilated areas. Also subject to working outdoors, occasionally under adverse conditions, i.e., wind, or rain. Noise levels may be high, but protective hearing devices are provided. Is subject to contact with dirt, grease, solvents, fumes and burns from electrical shock and possibility of falling from aircraft and work-stands. Also subject to scrapes and bruises when working in cramped positions. Safety equipment to include safety toed shoes, face shield, protective aprons, safety glasses, gloves, ear plugs, and/or hearing protective devices are issued for hazard abatement and are required for use during each actual exposure to hazardous working conditions. Requires adherence to proper safety procedures and use of appropriate personal protective equipment. Working conditions are considered in the evaluation of the position.

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • This position requires a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest.
  • The use of illegal drugs by Federal employees, whether on duty or off duty, is contrary to the efficiency of the service. The legalization and/or decriminalization of marijuana by some states has no impact on Federal law. The use and/or possession of marijuana remains illegal for Federal employees.
  • Direct deposit of pay is required.
  • This is a Career Program (CP) 17- Material Maintenance Management position.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • Salary includes applicable locality pay or Local Market Supplement.
  • Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.

You may claim Military Spouse preference.

Military Spouse Preference (MSP) applicants will receive preference consideration and will be placed (if selected) at the highest grade for which they have applied and are determined best qualified, up to and including the full performance level.

You may claim Priority Placement Program (PPP) preference.

Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.

U.S. Army Aviation and Missile Command

Civilian employees serve a vital role in supporting the Army mission. They provide the skills that are not readily available in the military, but crucial to support military operations. The Army integrates the talents and skills of its military and civilian members to form a Total Army.

The Army values diversity of perspectives, backgrounds, cultures and skills, which connects employees to organizations that are committed to building an inclusive work environment where they can contribute to their fullest potential.

To learn more about CCAD: https://www.ccad.army.mil/videos.html (recommend Edge, Chrome or Firefox).

Agency contact information

Army Applicant Help Desk
Website
https://portal.chra.army.mil/hr_public?id=app_inq
Address
GP-W0MUAA USA AMCOM CORPUS CHRISTI ARMY DEPOT
DO NOT MAIL
Corpus Christi, TX 78419
US

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.