Skip to main content
U.S. flag
 

Interdisciplinary (Engineer/Architect)

Department of the Army
U.S. Army Corps of Engineers
Southwestern Division (SWD)

Summary

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service.

This is anInterdisciplinary (Engineer/Architect), GS-08XX-11/12 position with the U.S. Army Corps of Engineers (USACE), Little Rock District. This position is located in Little Rock, AR.

About the Position: For additional information on USACE Little Rock District click Here

Overview

Help
Location
1 vacancy in the following location:
Work site options
Telework eligible
Yes—Eligible for situational telework only, including emergency and OPM prescribed "unscheduled Telework"
Remote job
No
Relocation expenses reimbursed
Yes—PCS and a Relocation/Recruitment Incentive may be authorized -- see "Additional Information" Section below for further details.
Salary
$99,954 - $127,443 per year

Salary reflected is for Little Rock, AR. Special Salary Rate Table may apply - see "Additional Information" Section below for further details.

Pay scale & grade
GS 11 - 12
Promotion potential
12
Pay scale and grade determines the salary of the job.
Work schedule
Full-time
Travel Required
Occasional travel - You may be expected to travel for this position.
Appointment type
Permanent
Supervisory status
No
Federal service type
This job is in the Competitive Service
Represented by a union
No
Drug test
No
Security clearance
Not Required
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Jobs require a background check and some require a security clearance. The type depends on the job.
Background check type
Financial disclosure required
No
Some jobs require financial disclosure to identify conflicts of interests.
Announcement number
CEDD-27-13108973-DHA
Control number
891650400

Videos

Duties

Help
  • Serves as the primary technical point of contact, and may be assigned as a Contracting Office's Representative to ensure contractors comply with contract drawings, engineering specifications, design parameters, and safety standards.
  • Performs comprehensive Biddability, Constructability, Operability, and Environmental reviews on design plans, specifications, and project drawings prior to solicitation to identify design deficiencies and minimize future contract modifications.
  • Administers contracts (within authority) by evaluating contractor progress, review and approve technical shop drawings/submittals, assessing progress payment requests, and preparing independent government cost estimates (IGCE) for modifications.
  • Analyzes complex or unforeseen field conditions, interpret engineering principles, and provide technical guidance to resolve critical construction and design problems on-site.
  • Collaborates with diverse stakeholders, including project managers, designers, contractors, and local authorities, to ensure project milestones are successfully achieved.
  • Prepares documentation and provides recommendations to the Administrative Contracting Officer or Contracting Officer for changes to the project.
  • Determines scope of work, calculates cost estimates and negotiates costs for the contract changes with the contractor.
  • Works with and may provide guidance to engineers, inspectors, and technicians who are providing quality assurance oversight of contracts.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • This position has a Temporary Duty (TDY) or business travel requirement of 20% of the time.
  • This position is a Contracting Officer's Representative and must obtain and maintain alt raining and certification as required.

Qualifications

Who May Apply: US Citizens

In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Specialized Experience: For GS-11:
One year of specialized experience which includes: 1. assisting with contract administration or inspection duties by reviewing routine contractor shop drawings; 2. performing on-site quality assurance inspections to verify compliance with contract plans and specifications; 3. participating in troubleshooting standard construction or design issues. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-09).
OR
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Engineering or Engineering Management.
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

For GS-12: One year of specialized experience which includes: 1. performing construction management oversight to ensure contractor compliance; 2. evaluating contractor progress and cost estimates for contract modifications; and 3. advising on quality assurance oversight procedures, interpretation of plans and specifications. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For the GS-12 level, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Education

Basic Requirements (for Engineers): A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

Basic Requirement for (Architect):A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture.

***NOTE: You MUST provide a copy of your transcripts with your application package or you will be rated ineligible.***

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • This position requires a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest.
  • The use of illegal drugs by Federal employees, whether on duty or off duty, is contrary to the efficiency of the service. The legalization and/or decriminalization of marijuana by some states has no impact on Federal law. The use and/or possession of marijuana remains illegal for Federal employees.
  • Direct Deposit of Pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a(n) Engineers and Scientist (Resources and Construction) Career Program position aligned under the Construction, Analysis, Science, Infrastructure & Engineers (CASIE) Career Management Directorate.
  • Salary includes applicable locality pay or Local Market Supplement.
  • When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction.htm for more information.
  • Payment of Permanent Change of Station (PCS) costs is authorized, subject to the provisions of the Joint Travel Regulations.
  • A Relocation Incentive of up to $7,500. may be authorized for current Federal employees.
  • A Recruitment Incentive of up to $7,500. may be authorized for new civilian federal employee (initial appointment), or previous civilian federal employee with a break in service of at least 90 days.
  • This position is authorized for a Special Salary Rate, Salary Range for SSR 0755 is: $99,954 - $127,443.
  • Management may select at the GS-11 or the GS-12 grade level. Full performance is at the GS-12. Promotion is at discretion of management.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.

You may claim Priority Placement Program (PPP) preference.

DoD Priority Placement Program (PPP) Applicants will receive preference consideration at the full-performance grade level only.

U.S. Army Corps of Engineers

Build Strong With Us at the U.S. Army Corps of Engineers (USACE), where engineering excellence meets public service. As the Nation's premier engineering, design, and construction management agency, we deliver innovative and efficient solutions that strengthen national security, support economic growth, and reduce disaster risks for communities across the country.

At USACE, you will find meaningful work, collaborative teams, and opportunities to grow your career while making a lasting impact. We seek talented professionals with vision, creativity, leadership, and technical expertise to help solve some of the Nation's toughest engineering challenges.

Build your purpose. Build your profession. Build your future. Discover why USACE is a great place to work and Build Strong With Us.

Agency contact information

Army Applicant Help Desk
Website
https://portal.chra.army.mil/hr_public?id=app_inq
Address
RK-W07604 US ARMY ENGINEER DISTRICT LITTLE ROCK
DO NOT MAIL
Little Rock, AR 72203
US

Visit our careers page

Learn more about what it's like to work at U.S. Army Corps of Engineers, what the agency does, and about the types of careers this agency offers.

https://www.usace.army.mil/Careers/

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.