This National Guard position is for a General Engineer, Position Description Number NGT5904800 and is part of the 114 FW. Indefinite, Title 5 Excepted Service. *** Indefinite Tenure- May be converted to Permanent per management discretion. Person selected for the position may be terminated at any time, upon 30-day written notice.***
AREAS OF CONSIDERATION:
- U.S. Citizens
Summary
This National Guard position is for a General Engineer, Position Description Number NGT5904800 and is part of the 114 FW. Indefinite, Title 5 Excepted Service. *** Indefinite Tenure- May be converted to Permanent per management discretion. Person selected for the position may be terminated at any time, upon 30-day written notice.***
This position is located Civil Engineering Squadron at an Air National Guard Wing. Purpose: The purpose of this position is to Provides supervisory (less than 25%) and technical assistance to the Base Architect/Engineer in overseeing and managing the engineering shops and production control function. Provides technical support to all assigned sections. Provides guidance to these sections on standard and code requirements. Develops engineered solutions to technical problems, which are incapable of being resolved by subordinates. Typical problems require the need to perform extensive mathematical and technical calculations in engineering to include civil, mechanical, electrical, or general engineering as well as architecture. The incumbent provides subordinate guidance and team leadership to Dual Status and Title 5 employees. Incumbent performs planning development necessary to accomplish architecture and engineering functions for programs essential to state Air National Guard daily operations, training, and readiness missions. Fosters an environment conducive to teaming among service providers and customers to meet state Air National Guard requirements
Males born after 31 December 1959 must be registered for Selective Service.
Federal employment suitability as determined by a background investigation.
May be required to successfully complete a probationary period.
Participation in direct deposit is mandatory.
Irregular and compensatory hours may be required to support operational requirements or contingencies.
This position is designated as Essential Personnel and may be subject to duty in preparation for, or in response to, a state emergency or disaster declaration.
Required to obtain and maintain the appropriate security clearance.
Qualifications
Basic Requirements:
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
B. 2. 1. "Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A."
B. 2. 2. "Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination."
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
Specialized Experience:
Must have 1-year equivalent to at least next lower grade level experience, education, or training in preparing technical and engineering drawings. Experience searching out and developing new or greatly modified methods and approaches to accomplish the Civil Engineering function. Experience in coordinating and negotiating with contractors and other personnel regarding engineering and administrative matters. Experience supervising and leading others within the Engineering Occupational Series.
Knowledge, Skill, and Abilities (KSAs):
Knowledge of the physical and mathematical sciences, engineering principles and accepted practices.
Skill in applying fundamental and diversified engineering concepts, theories and practices to achieve objectives.
Skill in communicating, writing and evaluating technical reports.
Skill in writing specifications and interpreting working drawings, reading engineering drawings, specifications and estimating time and material cost or similar engineering.
Skill in planning, designing, acquisition and execution of maintenance, repair and construction projects for real property facilities.
** NOTE ** This is a temporary appointment with Indefinite tenure. Management reserves the right to convert this appointment to a permanent position without further competition and will discuss this option with applicants selected for interviews. Person selected for the position may be terminated at any time, upon 30-day written notice.
This vacancy will remain open until 1 February 2027. Applications will be reviewed at 15 days post opening and at the beginning of the month thereafter. You will receive an email regarding your application status once reviewed. Announcement is subject to close at any time upon selection (prior to advertised closing date).
Education
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
B. 2. 1. "Applicants who have passed the EIT examination and have completed all the requirements for either (a) a bachelor's degree in engineering technology (BET) from an accredited college of university that included 60 semester hours of courses in the physical, mathematical, and engineering sciences, or (b) a BET from a program accredited by the Accreditation Board for Engineering and Technology (ABET) may be rated eligible for certain engineering positions at GS-5. Eligibility is limited to positions that are within or closely related to the specialty field of the engineering technology program. Applicants for positions that involve highly technical research, development, or similar functions requiring an advanced level of competence in basic science must meet the basic requirements in paragraph A."
B. 2. 2. "Because of the diversity in kind and quality of BET programs, graduates of other BET programs are required to complete at least 1 year of additional education or highly technical work experience of such nature as to provide reasonable assurance of the possession of the knowledge, skills, and abilities required for professional engineering competence. The adequacy of this background must be demonstrated by passing the EIT examination."
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
Additional information
RECRUITMENT or RELOCATION INCENTIVE:
A recruitment or relocation incentive may be offered dependent on budget.
BENEFITS:
The federal government offers a number of exceptional benefits to its employees which may include Flexible Spending Accounts, Health Insurance, Annual Leave, Life Insurance, Long Term Care Insurance, and Retirement Program. For additional information about current federal benefits visit web site http://www.opm.gov
Equal Employment:
The South Dakota National Guard is an equal opportunity employer and cannot discriminate against an employee or applicant with respect to the terms, conditions or privileges of employment on the basis of race, color, religion, sex (includes gender or sexual harassment), sexual orientation, national origin, age, disability (including pregnancy), marital status or political affiliation. Applicants or employees may contact the South Dakota National Guard Equal Employment Office at 605-737-6635 if they believe they have been the victim of unlawful discrimination.
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
How you will be evaluated
You will be evaluated for this job based on how well you meet the qualifications above.
EVALUATION METHODS: Each applicant considered to possess the minimum qualification requirements will be further evaluated in accordance with the procedures outlined in SDNG Technician Pamphlet 335-T and subsequent MOAs.
BASIS FOR RATING: Qualified candidates will be assigned to one of three quality categories: "Best- Qualified", "Well-Qualified", "Qualified".
"Best-Qualified" Level. Candidate possesses the qualifications that substantially exceed the basic requirements of the position and would allow the candidate to perform effectively in the position almost immediately or with a minimum of training and/or orientation.
"Well-Qualified" Level. Candidate possesses the qualifications that exceed the basic requirements of the position and would allow the candidate to perform effectively in the position within a reasonable period of time (3-6 months).
"Qualified" Level. Candidate possesses the qualifications that meet the basic requirements of the position.
VETERANS' PREFERENCE: If you are claiming veteran's preference, you MUST submit the appropriate documentation. Failure to do so WILL result in the loss of veteran's preference, and will possibly impact your placement on the certificate. For more veterans' information please click https://www.fedshirevets.gov/job/vetpref/index.aspx.
10 POINT VETERANS' PREFERENCE: You must submit all supporting documentation as specified on the SF 15, "Application for 10-Point Veterans' Preference". You can locate the SF 15 at https://www.opm.gov/forms/pdf_fill/SF15.pdf.
5 POINT VETERANS' PREFERENCE: You MUST submit a copy of your DD 214 which includes Character of Service (usually Member-4 copy). If you are currently active duty, you may submit written documentation (certification) from your branch of service certifying that you are expected to be discharged or released from active duty under honorable conditions no later than 120 days after the date the certification is signed. The certification should also include when your terminal leave will begin, your rank and dates of active-duty service.
**This is an open until filled announcement. Applications will be reviewed at 15 days post opening and at the beginning of the month thereafter. You will receive an email regarding your application status once reviewed. Announcement is subject to close at any time upon selection (prior to advertised closing date).
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
1. To apply for this position, you must submit a complete Application Package which includes:
a. Your resume (limit two pages) showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed. YOUR RESUME MUST HAVE COMPLETE INFORMATION. Timeframes of experience in Knowledge, Skills and Abilities (KSAs) will be addressed within the resume (including frequency, e.g., generated metric statistics daily, weekly, monthly, etc.). Please ensure your resume accurately reflects the duties and responsibilities under each position you have held with each employer. Please include applicable military assignments in the same format stated above. In describing your experience, as it applies to the position you are applying for, please be clear and specific. It is your responsibility to make sure your resume states complete information for each job entry. If your resume does not provide enough information regarding your work history for us to make a creditable qualification determination, your application package may be rendered disqualified and you will no longer be considered for this position.
b. Transcript(s)
2. Other supporting documents:
a. Knowledge, Skills and Abilities (KSAs) - Applicants are encouraged to submit a separate sheet(s) addressing the KSAs and how they relate to work experience, education or training.
b. SF50(s)
c. Veterans' Preference supporting documents: SF 15, DD 214, VA Letters, etc.
If you are relying on your education to meet qualification requirements:
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
SD 114 FW CIVIL ENGINEERING SQ
1201 WEST ALGONQUIN STREET
SIOUX FALLS, SD 57104-0264
US
Next steps
Once you successfully complete the application process, you will receive a notification of receipt. Your application package will be reviewed to ensure you meet the basic eligibility and qualification requirements, and you will receive a notification. A review will be made of your online questionnaire and the documentation you submitted to support your responses. A list of qualified applicants will be created and sent to the selecting official. All applicant reviewed and/or referred will receive a notification letter. The selecting official may choose to conduct interviews. Once the selection is made, you will receive a notification of decision.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
1. To apply for this position, you must submit a complete Application Package which includes:
a. Your resume (limit two pages) showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed. YOUR RESUME MUST HAVE COMPLETE INFORMATION. Timeframes of experience in Knowledge, Skills and Abilities (KSAs) will be addressed within the resume (including frequency, e.g., generated metric statistics daily, weekly, monthly, etc.). Please ensure your resume accurately reflects the duties and responsibilities under each position you have held with each employer. Please include applicable military assignments in the same format stated above. In describing your experience, as it applies to the position you are applying for, please be clear and specific. It is your responsibility to make sure your resume states complete information for each job entry. If your resume does not provide enough information regarding your work history for us to make a creditable qualification determination, your application package may be rendered disqualified and you will no longer be considered for this position.
b. Transcript(s)
2. Other supporting documents:
a. Knowledge, Skills and Abilities (KSAs) - Applicants are encouraged to submit a separate sheet(s) addressing the KSAs and how they relate to work experience, education or training.
b. SF50(s)
c. Veterans' Preference supporting documents: SF 15, DD 214, VA Letters, etc.
If you are relying on your education to meet qualification requirements:
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section.
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
SD 114 FW CIVIL ENGINEERING SQ
1201 WEST ALGONQUIN STREET
SIOUX FALLS, SD 57104-0264
US
Next steps
Once you successfully complete the application process, you will receive a notification of receipt. Your application package will be reviewed to ensure you meet the basic eligibility and qualification requirements, and you will receive a notification. A review will be made of your online questionnaire and the documentation you submitted to support your responses. A list of qualified applicants will be created and sent to the selecting official. All applicant reviewed and/or referred will receive a notification letter. The selecting official may choose to conduct interviews. Once the selection is made, you will receive a notification of decision.
Fair and transparent
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
