Clarification from the agency

This announcement is open to U.S. Citizens or Nationals; and Career transition eligibles (CTAP, ICTAP, RPL). This position will be filled under the Office of Personnel Management's Direct Hire Authority. Veteran's preference and traditional competitive rating and ranking of applications do not apply. All qualified applicants who meet the minimum qualifications will be referred to the hiring manager for consideration for the position.

Videos

Some of the major duties you will perform include but are not limited to the following:

• Monitors the Colorado-Big Thompson (CBT) Project system water operations daily to ensure compliance with short- and long-range plans.
• Develops and performs mathematical modeling of the complex river basins and reservoir systems of the Fry-Ark, Colorado Big Thompson (CBT) Project, and the Trinidad Project.
• Compiles data, prepares reports, and maintains database of current and historic, hydropower, hydrologic and climatologic data for the Fry-Ark and the CBT Projects.
• Analyzes new operational patterns needed due to severe hydrologic conditions as to their impact on the operation of the Fry-Ark and CBT systems.
• Coordinates the storage, release, and conveyance of water through the Fry-Ark and CBT systems through continuous and close coordination and interaction with internal and external customers.

Conditions of employment

• Must be a U.S. Citizen or National.
• Appointment subject to background investigation and favorable adjudication.
• Males born after 12-31-59 must be registered for Selective Service.
• Direct Deposit participation required.
• Successfully pass the E-Verify employment verification check. To learn more, visit www.dhs.gov/EVerify/.
• As a condition of employment for accepting this position, you will be required to serve a 1-year probationary period -OR- 2-year trial period during which your fitness and whether your continued employment advances the public interest will be evaluated.
• Must have and maintain a valid driver's license throughout employment.

This probationary or trial period is an extension of the appointment process and therefore requires the agency to determine if continued employment would advance the public interest, meet the organization goals and mission of the agency, and/or otherwise promote the efficiency of the service. In determining if your employment advances the public interest, the agency will consider:

• your performance and conduct;
• the needs and interests of the agency;
• whether your continued employment would advance organizational goals of the agency or the Government; and
• whether your continued employment would advance the efficiency of the Federal service.

Under applicable law, the employment of an individual serving a probationary or trial period automatically terminates when that period ends unless the agency affirmatively certifies, in writing, that the individual's employment should continue and that their appointment should be finalized. In the absence of agency action to affirmatively certify continued employment beyond the probationary or trial period, such appointments are terminated.

Upon completion of your probationary period -OR- trial period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.

Qualifications

Qualifications: All qualifications must be met by the closing date of this announcement-11/03/2026-unless otherwise stated in this vacancy announcement.

To receive credit for experience, your resume MUST state either "full-time" (or "40 hours a week") or "part-time" with the number of hours worked per week to ensure proper crediting of specialized experience. Failure to adequately provide information needed to determine number of hours worked in each position may result in that time not being credited when evaluating qualifying experience. For periods of time that reflect military service, the DD-214 or Statement of Service is sufficient to meet the full and/or part-time hours requirement as the service dates will be reflected.

To qualify for this position, you must meet the following minimum qualifications:

Individual Occupational Requirement: In addition to the specialized experience requirements for this position, you must meet at least one of the following:
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
-OR-
B. Combination of education and experience - college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically, would be rated eligible only for manufacturing engineering positions.
-OR-
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
-OR-
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
-OR-
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)
-AND-
To qualify for the GS-11 grade level, applicants must have at least one year of specialized experience equivalent to the GS-9 level in the Federal service, or comparable experience obtained outside the Federal government. Specialized experience is defined as experience that demonstrates one or more of the following:

• Applying technical documents, standard operating procedures (SOPs), plans, specifications, or designs to understand and support the operation of complex projects, facilities, systems, equipment, or processes.
• Collecting, managing, validating, analyzing, or visualizing data, including activities such as maintaining monitoring equipment, ensuring data quality, or using data management tools.
• Developing or using numerical models to represent and evaluate physical processes.
• Analyzing and interpreting hydrologic, civil engineering, or other complex time-series data.
• Collaborating as part of a project team to develop or deliver a complex product, service, or outcome.

To qualify for the GS-12 grade level, applicants must have at least one year of specialized experience equivalent to the GS-11 level in the Federal service, or comparable experience obtained outside the Federal government. Specialized experience is defined as experience demonstrating one or more of the following:

• Preparing technical documents, standard operating procedures (SOPs), plans, specifications, or designs that explain, document, or support complex projects, software, facilities, systems, equipment, or processes.
• Managing data systems and processes, including operation of monitoring or gaging networks, database management, development or use of automated data tools, and presentation of technical information to stakeholders through reports, briefings, or presentations.
• Developing, modifying, or applying models related to hydrology, reservoir operations, water resources, or other complex multi-purpose systems.
• Analyzing and interpreting hydrologic or other complex time-series data to support forecasting, planning, or decision-making under uncertain conditions.

Superior Academic Achievement (SAA): Successfully completed a bachelor's degree in a directly related field AND meet one of the following: (1) Class Standing: rank in the upper 3rd of the graduating class in the college, university, or major subdivision, based on the completed courses; OR (2) Grade-Point Average (GPA): earn a GPA of (a) 3.0 or higher out of a possible 4.0 ("B" or better) based on 4 years of education, or based on courses completed during the final 2 years of the curriculum -or- (b) 3.5 or higher out of a possible 4.0 ("B" or better) based on the average of the required courses completed in the major field, or the required courses completed during the final two years. Note: GPA will be rounded to one decimal place, for example, 2.95 = 3.0, 2.94 = 2.9; OR (3) Membership in a National Scholastic Honor Society.

Volunteer Experience: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Your qualifications will be evaluated based on your application materials (e.g. resume, supporting documents), the responses you provide on the application questionnaire, and the result of any additional assessment(s) required for this position.

Your resume must not exceed 2 pages. Only the document submitted as the "Resume" under the Documents section will be used to determine your qualifications/eligibility and for rating purposes. In the event you submit more than one resume, only the latest submission will be reviewed.

You will be assessed in the following competencies (knowledge, skills, abilities, and other characteristics):

• Arithmetic/Mathematical Reasoning
• Attention to Detail
• Customer Service
• Flexibility
• Integrity/Honesty
• Interpersonal Skills
• Learning
• Reading Comprehension
• Self-Management
• Stress Tolerance
• Teamwork

In addition to the application and application questionnaire, this position requires successful completion of the USA Hire Assessment, if required.

Overstating your qualifications and/or experience in your application materials or application questionnaire may result in your removal from consideration. Cheating on an assessment may also result in your removal from consideration.

The assessment is a pass/fail assessment, and you must pass the assessment to be considered for the position.

Current or former displaced Federal employees who are surplus, displaced, or involuntarily separated have special priority selection rights under the Agency Career Transition Assistance Program (CTAP) or the Interagency Career Transition Assistance Program (ICTAP). To be considered under CTAP/ICTAP, you must be well-qualified, score at least 85 (i.e., meet the minimum qualification requirements, including any selective placement factors; education, and experience requirements), and be able to perform the duties of the position upon entry.

Providing false or misleading information on your resume or supporting documentation may result in removal from consideration or other action consistent with applicable federal hiring regulations. Applicants who include vulgar, offensive, or inappropriate language or information in their application package will be ineligible for further consideration for this position.