Skip to main content
U.S. flag
 

Civil Engineer

Department of the Army
U.S. Army Communications Electronics Command
TOBYHANNA ARMY DEPOT D/PRODUCTION ENGINEERING SATCOM AND SITE INSTALLATION DIVISION

Summary

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service.

About the Position: This vacancy is a career ladder position, it may be filled at the GS-07/09 or 11 level. Noncompetitive promotion to the full performance level GS-11 is authorized without further competition when selectee is eligible & recommended by management.

Overview

Help
Location
1 vacancy in the following location:
Work site options
Telework eligible
Yes—Eligible for situational telework only including Emergency and OPM prescribed " Unscheduled Telework"
Remote job
No
Relocation expenses reimbursed
No
Salary
$59,465 - $114,413 per year
Pay scale & grade
GS 7 - 11
Promotion potential
11
Pay scale and grade determines the salary of the job.
Work schedule
Full-time
Travel Required
50% or less - You may be expected to travel for this position.
Appointment type
Permanent
Occupations and job series
Supervisory status
No
Federal service type
This job is in the Competitive Service
Represented by a union
No
Drug test
No
Security clearance
Secret
Position sensitivity and risk
Noncritical-Sensitive (NCS)/Moderate Risk
Jobs require a background check and some require a security clearance. The type depends on the job.
Background check type
Financial disclosure required
No
Some jobs require financial disclosure to identify conflicts of interests.
Announcement number
MCAD-26 13085330-DHA
Control number
888473100

Duties

Help
  • Serve as a Civil Engineer for the TYAD Production Engineering SATCOM Site Installation Division, responsible for planning, designing, and inspecting new construction and facility repair projects.
  • Conduct site visits to SATCOM facilities to develop Statements of Work (SOWs) and Site Requirements Packages (SRPs) supporting new construction, facility modifications, maintenance, and repair of structural, facility, and utility systems.
  • Attend pre solicitation and bid opening conferences to clarify key construction features and communicate requirements related to project scheduling, progress reporting, and safety compliance,
  • Utilize Trimble total station data collection equipment and Autodesk Civil 3D to produce accurate as-built site plans and gather initial survey data to support new antenna structure design.
  • Develop and/or coordinate the development of drawings, specifications, and detailed cost estimates, including labor, materials, supplies, equipment, and associated economic analysis.
  • Direct the work of engineering technicians and draftsmen contributing to the development of project designs and technical documentation.
  • Assist with the alignment of satellite dish reflector elements using precision measuring equipment such as optical levels, electronic distance measurement instruments, and photogrammetry.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • Must be able to obtain and maintain a Secret security clearance through-tout entire employment duration.
  • Army Acquisition, Logistics and Technology Workforce position (Foundational ). Selectee must meet position requirements for Engineering and Technical Management certification within 36 months entrance on duty.
  • This position requires the incumbent to pass the National Council of Engineers and Surveying (NCEES) Fundamentals of Engineering (FE) exam within two years.
  • Temporary Duty (TDY) Business travel is required up to 40%.
  • Appointment to this position is subject to a one year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 315

Qualifications

Who May Apply: US Citizens

In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Who May Apply: US CitizensIn order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement for Civil Engineer:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3.Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)


In addition to meeting the basic requirement above, to qualify for this position you must also meet the specialized experience requirement listed below to qualify for the GS-07, GS-09, and GS-11 grade levels:

Specialized experience for GS-07 Grade Level :
One year of specialized experience which includes: Performing basic project studies including written reports of findings and recommendations; AND 2) Assisting other engineers with generating construction drawings and as-built site plan; AND 3) Collecting initial survey data to include performing calculations for new structure design.. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-05).
OR
Education: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: as: engineering, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology.(Note: You must attach a copy of your transcripts.)
OR
Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on:(1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR(2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR(3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/).
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages.

**Please see the Education section for the GS-09 and GS-11 Grade Levels**

Education

Specialized Experience for GS-09 Grade Level: One year of specialized experience which includes:) Assisting engineers with generating construction drawings and as-built site plans; AND 2) Collecting survey data to include performing calculations for new structure design; AND 3) Assisting higher grade engineers with civil site design as it relates to grading equipment placement and utility configuration to support installation projects. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-07).

OR
Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as:as: engineering, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology.(Note: You must attach a copy of your transcripts.)

OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages.

Specialized Experience for GS-11 Grade Level: One year of specialized experience which includes: Performing project studies including written reports of findings and recommendations; AND 2) Performing civil site design as it relates to grading, equipment placement, and utility configuration to support installation projects such as antenna installation; AND 3) Conducting field inspection of construction to ascertain compliance with the contract prints and specifications. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-09)
OR
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: engineering, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology.(Note: You must attach a copy of your transcripts.)
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications

Additional information

  • Direct Deposit of Pay is required.
  • This position requires a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a(n) Engineers Career Program position aligned under the Career Management Directorate.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.
  • All applicants (including current federal employees) are required to upload official/unofficial college/university transcripts (or copy thereof) when applying to positions with positive education requirements or when intending to qualify themselves based in whole or part on education. College/university transcripts (official/unofficial) MUST include name of applicant, name of college/university, type of degree, discipline, and date degree awarded.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.

DoD Priority Placement Program (PPP) Applicants will receive preference consideration at the full-performance grade level only.

Veterans and Military Spouses will be considered along with all other candidates.?

Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.

U.S. Army Communications Electronics Command

Civilian employees serve a vital role in supporting the Army mission. They provide the skills that are not readily available in the military, but crucial to support military operations. The Army integrates the talents and skills of its military and civilian members to form a Total Army.

Agency contact information

Army Applicant Help Desk
Website
https://portal.chra.army.mil/hr_public?id=app_inq
Address
AD-W0MLAA TOBYHANNA ARMY DEPOT
DO NOT MAIL
Tobyhanna, PA 18466
US

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.