This position is located in the National Transportation Safety Board (NTSB), Office of Aviation Safety (OAS) in Washington, D.C.. OAS examines various areas relating to the accident aircraft including powerplants, structures, systems, & maintenance records. Aviation engineering investigators serve as group chairman in major aviation investigations & conduct an objective technical investigation of the accident in order to prepare reports used to develop the final report & safety recommendations.
This position is located in the National Transportation Safety Board (NTSB), Office of Aviation Safety (OAS) in Washington, D.C.. OAS examines various areas relating to the accident aircraft including powerplants, structures, systems, & maintenance records. Aviation engineering investigators serve as group chairman in major aviation investigations & conduct an objective technical investigation of the accident in order to prepare reports used to develop the final report & safety recommendations.
Newly appointed federal government employees, starting salary rate may be set at the step 1 of the GS-14.
Applications will be accepted from any U.S. Citizen. Direct-Hire Authority will be used to fill this position. Veteran's preference and category rating of applicants does not apply to this vacancy. This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Direct Hire Authority for Shortage Category/Critical need positions to recruit and appoint qualified candidates to positions in the competitive service.
As a Aerospace Engineer (Systems) - Direct Hire, GS-0861-14, you will perform the following major duties:
Physical Demands: Occasionally the aircraft wreckage may contain hazardous materials that may be burning by the time the investigator arrives on-the-scene. The incumbent may be exposed to a variety of weather conditions and other environmental discomforts such as remote, rugged, snow, rain, temperature extremes, swampy or mountainous areas and hostile settings. Investigators may have to wear a hardhat, safety shoes, goggles, gloves, and other protective equipment.
Work Environment: The incumbent supports major go-team launches as well as significant international investigations. Major go-team launch teams commonly travel on the Federal Aviation Administration (FAA) jet from Reagan National Airport within two hours after an accident notification is received. Timely arrival at the scene of a major accident allows for timely documentation of a wreckage; a delay in this effort can have significant impacts, such as impeding the re-opening of an airport. International travel by US Government employees frequently requires the issuance of a visa from the host country, which is most efficiently obtained at the embassies located in Washington, DC. Additionally, security concerns in many locations make it essential that the investigative team travel together.
To qualify for this position, you must meet both the Educational Requirements and the Specialized Experience as described below.
EDUCATION: A. 4-year course of study leading to a bachelor's degree in professional engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength materials (stress-strain relationships);(c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science and physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A above.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
You MUST provide either official or unofficial transcripts or other documentation to support your educational claims. All materials must be submitted by the closing date of the announcement.
GENERAL EDUCATION: All academic degrees and coursework must be completed at an institution that has obtained accreditation or pre-accreditation status from an accrediting body recognized by the U.S. Department of Education for it to be credited towards qualifications. For a list of schools that meet these criteria, see https://www.ed.gov/accreditation?src=rn. Applications submitted without the required supporting documents will not be accepted. An unofficial transcript; statement from the institution's registrar, dean, or other appropriate official; or equivalent documentation is acceptable at the time of application. Education submitted must be appropriately accredited by an accredited body recognized by the Secretary of the U.S. Department of Education. For additional information, refer to the U.S. Department of Education web site at: http://www.ed.gov
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://www2.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
You will be evaluated for this job based on how well you meet the qualifications above.
This position will be filled through the Direct Hire Authority. Under this authority, competitive rating, ranking, and veterans' preference procedures do not apply. Your application will be considered based on education, training, and quality of your experience. For more information on Direct-Hire Authority visit: https://www.opm.gov/policy-data-oversight/hiring-information/direct-hire-authority/
Your application must include your resume and required supporting documents. Please be sure that your resume includes detailed information to support your qualifications for this position; failure to provide sufficient evidence in your resume may result in a "not qualified" determination.
Referral: Applicants who meet the qualification requirements may be referred to a selecting official for consideration. Candidates may be required to participate in a selection interview (telephonic and/or in person) at the discretion of the Selecting Official in accordance with hiring practices.
The following documents are required for a COMPLETE APPLICATION PACKAGE:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
Please read the entire announcement and all the instructions before you begin an application. To apply and be considered for this position, you must complete all required questionnaires, assessments and submit all required documentation as specified in the How to Apply and Required Documents section. The complete application package must be submitted by 11:59 PM (ET) on the closing date of the announcement to receive consideration. The application process is as follows:
Once your online application is submitted you will receive a confirmation notification by email. After we receive application packages (including all required documents) and the vacancy announcement closes, we will review applications to ensure qualification and eligibility requirements are met. After the review is complete, a referral certificate(s) is issued and applicants will be notified of their status by email. Referred applicants will be notified as such and may be contacted directly by the hiring office for an interview. All referred applicants receive a final notification once a selection decision has been made.
You may check the status of your application at any time by logging into your USA Jobs account and clicking on Applications. Information regarding your application status can be found in the USAJobs Help Center.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
