Clarification from the agency

This announcement is open to U.S. Citizens or Nationals; and Career transition eligibles (CTAP, ICTAP, RPL).

Videos

Some of the major duties you will perform include but are not limited to the following:

• Plans, develops, directs, and prepares procedures, policies, and protocols for engineering studies, designs, and special projects that require advanced engineering analysis. Leads and advises technical teams, directing technical procedures and practices for the teams.
• Engineering analysis for studies and projects include technical planning activities; data collection; modeling and data analyses; analyses of site location and/or conditions; or risk estimation and analyses.
• Provides technical reviews, peer reviews, and checking of designs, drawings, engineering analysis, and technical documents, specifications, and contract correspondence, ensuring documents are accurate and quality assurance processes were followed.
• Lead technical team on large and technically complex projects, guide the critical path of a job, prepare project management initiation, planning, executing, monitoring/controlling, and closeout documents, and facilitate meetings/workshops.
• Applying qualitative and quantitative analytical techniques and project management principles, methods, tools, and techniques to direct, develop, schedule, coordinate, monitor, and manage projects.
• Distinguish between relevant and irrelevant information to make logical decisions and develop solutions and communicating effectively with all levels and types of audiences.
• Advises senior leadership, program officials, and colleagues on engineering analysis, recommendations, and study conclusions.
• Communicate in a clear, concise, organized, and convincing manner of technical information for the intended audience.
• Organize and prepare, or direct and coordinate the preparation of, materials such as specifications documents, reports, meeting minutes, travel reports, drawings, maps, graphs, or figures; deliver oral presentations or briefings; and participate in or lead meetings - to communicate, promote TSC capabilities, and convey work status and findings to team, clients, superiors, and others.

Conditions of employment

• Must be a U.S. Citizen or National.
• Appointment subject to background investigation and favorable adjudication.
• Males born after 12-31-59 must be registered for Selective Service.
• Direct Deposit participation required.
• Successfully pass the E-Verify employment verification check. To learn more, visit www.dhs.gov/EVerify/.
• Professional Engineering (P.E.) registration is required for this position.

As a condition of employment for accepting this position, you will be required to serve a 1-year probationary period during which your fitness and whether your continued employment advances the public interest will be evaluated.

This probationary period is an extension of the appointment process and therefore requires the agency to determine if continued employment would advance the public interest, meet the organization goals and mission of the agency, and/or otherwise promote the efficiency of the service. In determining if your employment advances the public interest, the agency will consider:

• your performance and conduct;
• the needs and interests of the agency;
• whether your continued employment would advance organizational goals of the agency or the Government; and
• whether your continued employment would advance the efficiency of the Federal service.

Under applicable law, the employment of an individual serving a probationary or trial period automatically terminates when that period ends unless the agency affirmatively certifies, in writing, that the individual's employment should continue and that their appointment should be finalized. In the absence of agency action to affirmatively certify continued employment beyond the probationary or trial period, such appointments are terminated.

Upon completion of your probationary period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.

*Additional Requirements located under qualifications*

Qualifications

Qualifications:

All qualifications must be met by the closing date of this announcement-10/15/2026-unless otherwise stated in this vacancy announcement.

To receive credit for experience, your resume MUST state either "full-time" (or "40 hours a week") or "part-time" with the number of hours worked per week to ensure proper crediting of specialized experience. Failure to adequately provide information needed to determine number of hours worked in each position may result in that time not being credited when evaluating qualifying experience. For periods of time that reflect military service, the DD-214 or Statement of Service is sufficient to meet the full and/or part-time hours requirement as the service dates will be reflected.

To be eligible for consideration, you must first meet the Individual Occupational Requirement for this position

QUALIFICATIONS FOR GS-0810, CIVIL ENGINEER:

1. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

-OR-

2. Combination of education and experience: college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) 2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.

3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph 1.

4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

To qualify for this position at the GS-13 grade level:

Experience: To qualify, you must possess at least one full year of specialized experience equivalent to the GS-12 level in the Federal service (obtained in either the public or private sectors). Specialized experience is defined as demonstrated experience: Planning, organizing, and managing complex engineering projects, including scope and schedule development, risk identification, and ensuring timely, high-quality deliverables. Reviewing or overseeing technical products (such as designs, analyses, reports, or studies) to ensure accuracy, adequacy, and compliance with standards. Applying professional engineering and science related knowledge relevant to civil engineering in support of water storage and conveyance, water treatment, hydropower, pumping plant, or related technical systems.

Volunteer Experience: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Your qualifications will be evaluated based on your application materials (e.g. resume, supporting documents), the responses you provide on the application questionnaire, and the result of any additional assessment(s) required for this position.

Your resume must not exceed 2 pages. Only the document submitted as the "Resume" under the Documents section will be used to determine your qualifications/eligibility and for rating purposes. In the event you submit more than one resume, only the latest submission will be reviewed.

If your resume is incomplete or does not support the responses provided in the Assessment Questionnaire, your score will be adjusted accordingly. If a determination is made that you have inflated your qualifications or experience, you can lose consideration for this position.

You will be assessed in the following competencies (knowledge, skills, abilities, and other characteristics):

• Civil Engineering
• Project Management
• Written Communication

Overstating your qualifications and/or experience in your application materials or application questionnaire may result in your removal from consideration. Cheating on an assessment may also result in your removal from consideration.

To be considered for this position, you must complete all required steps in the process. In addition to the application and application questionnaire, this position requires successful completion of additional assessment(s), including a structured resume review. These assessments measure the critical competencies listed above that are required to successfully perform the job.

Current or former displaced Federal employees who are surplus, displaced, or involuntarily separated have special priority selection rights under the Agency Career Transition Assistance Program (CTAP) or the Interagency Career Transition Assistance Program (ICTAP). To be considered under CTAP/ICTAP, you must be well-qualified, score at least 85 (i.e., meet the minimum qualification requirements, including any selective placement factors; education, and experience requirements), and be able to perform the duties of the position upon entry.

Providing false or misleading information on your resume or supporting documentation may result in removal from consideration or other action consistent with applicable federal hiring regulations. Applicants who include vulgar, offensive, or inappropriate language or information in their application package will be ineligible for further consideration for this position.