Skip to main content
U.S. flag
 

Interdisciplinary

Department of the Army
U.S. Army Test and Evaluation Command
U.S. Army Aberdeen Test Center (ATC)

Summary

About the Position: This position is located at the U.S. Army Aberdeen Test Center (ATC), with a duty location of Aberdeen Proving Ground, MD. (merit)

Overview

Help
Accepting applications
Location
Work site options
Telework eligible
Yes—Situational Telework only may be approved as determined by the agency policy.
Remote job
No
Relocation expenses reimbursed
No
Salary
$102,415 - $158,322 per year
Pay scale & grade
NH 3
Promotion potential
None
Pay scale and grade determines the salary of the job.
Work schedule
Full-time
Travel Required
25% or less - You may be expected to travel up to 20% of the time for this position.
Appointment type
Permanent
Supervisory status
No
Federal service type
This job is in the Competitive Service
Represented by a union
No
Drug test
No
Security clearance
Secret
Position sensitivity and risk
Noncritical-Sensitive (NCS)/Moderate Risk
Jobs require a background check and some require a security clearance. The type depends on the job.
Background check type
Financial disclosure required
No
Some jobs require financial disclosure to identify conflicts of interests.
Announcement number
SDSE-26-13073374-MP
Control number
885862900

Duties

Help
  • Senior Test Officer, working lead, and subject matter expert on test programs involving broad categories of military equipment and systems associated with one or more of the organizational test commodity directorates.
  • Technically directs and coordinates large, unique, or highly complex test and evaluation projects involving assigned commodity equipment and systems.
  • Test team leader when test programs require the simultaneous effort of several test officers at different test sites.
  • Review collected laboratory data, field performance data, and evaluation information for completeness, accuracy, and validity; and determines whether additional tests are required to satisfy test objectives.
  • Establishes test duration; determines safety, environmental, and security measure requirements; prepares cost estimates and schedules for tests; and coordinates support requirements with test scheduling office and supporting organizational elements.
  • Establishes procedures and processes needed to test technical performance, properties, design characteristics, safety, human factors engineering, and reliability and maintainability of both systems/materiel and major subsystems.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • This position requires the incumbent be able to obtain and maintain a determination of eligibility for a Secret security clearance or access for the duration of employment. A background investigation and credit check are required.
  • This position has a Temporary Duty (TDY) or business travel requirement of up to 20% of the time.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.

  • Current U.S. Army Test and Evaluation command employees with competitive status.
  • Current Civilian Employees of the Command
  • Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel Workforce
  • Interagency Career Transition Assistance Plan
  • Land Management Workforce Flexibility Act
  • Military Spouses, under Executive Order (E.O.) 13473
  • Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible
  • Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible
  • Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement
  • Priority Placement Program, DoD Retained Grade Preference Eligible
  • Veterans Employment Opportunity Act (VEOA) of 1998


In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

SPECIALIZED EXPERIENCE REQUIRMENT.

One year of specialized experience which includes: 1) Coordinates test plans to evaluate system performance; and 2) Analyzes test data to identify equipment deficiencies; and 3) Prepares technical reports to document test findings.
This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11/NH-02).

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

In addition to meeting the specialized experience above, to qualify for this position you must also meet the basic requirement listed below:

EDUCATION REQUIREMENT for Professional Engineer (0800) Series.
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

EDUCATION REQUIREMENT for Physical Science (1301) Series.
A. Degree: Bachelor's degree (or higher degree) in physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics.
OR
B. Combination of Education and Experience: Courses equivalent to one of the majors, as shown in A above, that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education.

EDUCATION REQUIREMENT for Mathematics (1520) Series.
A. Degree: Bachelor's degree (or higher degree) in mathematics; or a degree with the equivalent of a major that included at least 24 semester hours in mathematics. The total course work must have included differential and integral calculus and, in addition, four advanced mathematics courses requiring calculus or equivalent mathematics courses as a prerequisite.
OR
B. Combination of Education and Experience: Courses equivalent to a major in mathematics (including at least 24 semester hours in mathematics), as shown in A above, plus appropriate experience or additional education. The total course work must have included differential and integral calculus and, in addition, four advanced mathematics courses requiring calculus or equivalent mathematics courses as a prerequisite.

You will be evaluated on the basis of your level of competency in the following areas:
  • Data Management
  • Project Management
  • Technical Competence
  • Written Communication

Education

EDUCATION REQUIREMENT for Mathematical Statistics (1529) Series.

A. Degree: Bachelor's degree (or higher degree) that included 24 semester hours of mathematics and statistics, of which at least 12 semester hours were in mathematics and 6 semester hours were in statistics.
OR
B. Combination of Education and Experience: At least 24 semester hours of mathematics and statistics, including at least 12 hours in mathematics and 6 hours in statistics, as shown in A above, plus appropriate experience or additional education.

Courses acceptable toward meeting the mathematics course requirement of paragraphs A or B above must have included at least four of the following: differential calculus, integral calculus, advanced calculus, theory of equations, vector analysis, advanced algebra, linear algebra, mathematical logic, differential equations, or any other advanced course in mathematics for which one of these was a prerequisite.

The experience offered in combination with educational courses to meet the requirements in paragraph B above should include evidence of statistical work such as (a) sampling; (b) collecting, computing, and analyzing statistical data, and (c) applying known statistical techniques to data such as measurement of central tendency, dispersion, skewness, sampling error, simple and multiple correlation, analysis of variance, and tests of significance.

EDUCATION REQUIREMENT for Computer Science (1550) Series.

Degree: Bachelor's degree (or higher degree) in computer science or bachelor's degree (or higher degree) with 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of the 30 semester hours must have included any combination of statistics and mathematics that included differential and integral calculus.


FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • This position requires a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest.
  • Direct deposit of pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a(n) Engineers and Scientists (Resource and Construction) Career Program position aligned under the Construction, Alalysis, Science, Infrastructure and Engineers (CASIE) Career Management Directorate.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.
  • This is an Army Acquisition, Logistics and Technology Workforce position. Selectee must meet position requirements for Test and Evaluation certification within 60 months as of entrance on duty.
  • This is an interdisciplinary position which may be filled under any of the following titles and occupational series, depending on the qualifications of the applicant and needs of management:
  • General Engineer, 0801
    Materials Engineer, 0806
    Environmental Engineer, 0819
    Mechanical Engineer, 0830
    Electrical Engineer, 0850
    Computer Engineer, 0854
    Electronics Engineer, 0855
    Chemical Engineer, 0893
    Physical Scientist, 1301
    Operations Research Analyst, 1515
    Mathematician, 1520
    Computer Scientist, 1550
    Mathematics Statistician, 1529
  • The U.S. Army Test and Evaluation Command (ATEC) is participating in an alternate personnel system known as the Acquisition Demonstration Project (AcqDemo). Among other features, the Demonstration Project replaced GS grade levels with occupational families and pay bands. The band NH-03 is equal to the former GS-12 Step 01 through GS-13 step 10. ATEC uses salary control points to allow for differentiation in the level of positions within the same broadband. Therefore, the salary for this position will be set no higher than $158,322 including locality.
  • The Aberdeen Test Center's (ATC) mission statement: Provide test and test support services for authorized customers within and outside of DoD, including Government and non-Government organizations, domestic, and foreign. Perform comprehensive test and training, both real and simulated. Exploit emerging technologies. Develop leading-edge instrumentation and test methodologies.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.

You may claim Military Spouse preference.

You may claim Priority Placement Program (PPP) preference.

U.S. Army Test and Evaluation Command

Civilian employees serve a vital role in supporting the Army mission. They provide the skills that are not readily available in the military, but crucial to support military operations. The Army integrates the talents and skills of its military and civilian members to form a Total Army.

ATEC is the Army's independent test and evaluation organization. We are a team of Civilian and Military personnel working together to provide America's Military with the best equipment to win and return home safely. At ATEC, we have a saying: If a Soldier rides, wears, shoots, or deploys it, we test it. ATEC is at the forefront of testing and evaluating technologies of the future from autonomous aerial/ground vehicles to hypersonic weapons. Each day, top scientists and engineers test and evaluate cutting-edge equipment. Our workforce is highly technical and skilled, comprised of more than 8,500 military, civilian, and contract personnel. Engineers, scientists, technicians, researchers, and evaluators work with innovative, advanced technologies in 24 testing and research locations across the U.S. States and around the world.

Agency contact information

Army Applicant Help Desk
Website
https://portal.chra.army.mil/hr_public?id=app_inq
Address
SE-W4QUAA US ARMY TEST EVALUATION CMD
DO NOT MAIL
Aberdeen Proving Ground, MD 21005
US

Visit our careers page

Learn more about what it's like to work at U.S. Army Test and Evaluation Command, what the agency does, and about the types of careers this agency offers.

http://www.atecciviliancareers.com

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.