Skip to main content
U.S. flag
 

Summary

This position is located in the Architect of the Capitol, Office of the Chief Engineer, Construction Management Division, Construction Execution Branch. The selectee is a Wood Crafter (CNC) and utilizes Computer Numerical Control (CNC) technology to develop seals, signage and other engravable images in wood, plastic and metal characterized with intricate and detailed designs.

Overview

Help
Accepting applications
Location
3 vacancies in the following location:
Work site options
Telework eligible
No
Remote job
No
Relocation expenses reimbursed
No
Salary
$36.49 - $42.63 per hour
Pay scale & grade
WG 11
Promotion potential
11
Pay scale and grade determines the salary of the job.
Work schedule
Full-time - This is an Excepted Service position and does not require or confer civil service Competitive Status
Travel Required
Not required
Appointment type
Temporary - Full Time - Temporary Not to Exceed 13 Months. Appointment may be extended beyond the 13 Months Time Frame at the sole discretion of the Agency.
Occupations and job series
Supervisory status
No
Federal service type
This job is in the Excepted Service
Drug test
Yes
Security clearance
Not Required
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Jobs require a background check and some require a security clearance. The type depends on the job.
Background check type
Financial disclosure required
Yes
Some jobs require financial disclosure to identify conflicts of interests.
Announcement number
CEB-2026-384
Control number
885033300

This job is open to

Help

Clarification from the agency

Applications Will Be Accepted From All USA Citizens. Note: Please be advised that federal retired annuitant candidates may only be considered as a temporary employee if the role can be filled in that capacity.

Duties

Help

***Please Note: This position is temporary in nature and is not to exceed 13 Months. This is strictly a temporary appointment
where there is no permanent need or permanent funding available for the work involved and that the temporary appointment is limited in duration. The duration of this temporary appointment may be shorter or longer, depending on the duration of the work or project. The temporary position may also be terminated at any time due to lack of work and/or lack of funds without any advance notice. As a non-permanent employee, you may also be separated for failure to meet management’s expectations, with no advance notice.

Tour of Duty: Night: 7:00 pm to 5:30 am or Day: 4:00 am to 2:30 pm (Monday through Thursday,

Hours May Change Due to Operational Needs of Management 

3 Vacancies are available either day or night shift

***Please indicate your level of experience in operating CNC equipment in your resume***

Utilizes CNC Technology

Fabricates signage using a state-of-the-art CNC signage machine. Using CNC technology, develops logos, symbols and upscale designer signage. Utilizing computer programming discs, flash drives and internet images, selects appropriate programs. Performs complex computer navigations to upload web site based images for application needs.
 
Creates patterns for nonstandard images and shapes. Utilizes the CNC router and similar devices to produce, logos, signage and symbols, thru computer programing, discs, flash-drives, CAD software and internet images.  

Uses, creates designs and fabricates high grade cabinetry, furniture, woodwork and signs using various CNC technology. An example of this is the New Hermes gravograph system and the IS 8000 to produce logos, signage, symbols and patterns/templates. 

Decorative Woodwork

Performs the full range of wood crafting tasks, such as demolition, measuring, cutting, constructing, installing and modifying wooden or metal framework in order to produce framing, benches, partitions, tables and furniture.

Constructs woodwork items that require working to close tolerances, exact fit and structural soundness. Fabricates and constructs high-grade wooden items, such as cabinets and furniture.

Builds and repairs items that have intricate, precise and fancy features, plus details such as curved and contoured surfaces, book-matched panels, scrollwork, friezes, inlays and complex joints. Uses specifications, blueprints and sketches to construct the items.

Demonstrates a high degree of skill and ability to work with close tolerances and exactness of measurements to yield precise copies.

Designs complex, unique and one-of-a-kind carpentry projects, such as cabinetry and furniture with decorative woodwork, curved or contoured surfaces or complex joints.

Plans and lays out work from blueprints, drawings, photos, sketches, field investigations and measurements or verbal instructions. Considers tooling, durability, cost and purpose of the items to be completed.

Carpentry Projects

Follows designs and lays out carpentry materials using trade knowledge of wood materials and substitutes and both general and precision woodworking techniques.

Completes wood working portions of renovation, construction and movement projects. Constructs and installs various types of office partitions and walls.

Constructs, alters, installs, maintains and/or repairs high-grade wood items, such as cabinetry, furniture or decorative woodwork.

Utilizes knowledge of and must comply with all OSHA and Office of Compliance safety rules and regulations to ensure that work progresses in a safe manner. The position also provides or receives training, either on the job or through classroom training, to ensure the utilization of all required Personal Protective Equipment (PPE), etc.

Performs other related duties as assigned.

Requirements

Help

Conditions of employment

  • You must be able to pass a drug test.
  • Your resume and question responses must demonstrate job-related elements.

To be employed by the Architect of the Capitol in a paid position, an individual must meet one of the categories below:

  • A citizen of the United States;
  • A person who is lawfully admitted for permanent residence and is seeking citizenship as outlined in 8 U.S.C. 1324b(a)(3)(B);
  • A person who is admitted as a refugee under 8 U.S.C. 1157 or is granted asylum under 8 U.S.C. 1158 and has filed a declaration of intention to become a lawful permanent resident and then a citizen when eligible;
  • A person who owes allegiance to the United States (nationals of American Samoa, Swains Island, and the Northern Mariana Islands, and nationals who meet other requirements described in 8 U.S.C. 1408); or
  • A person who is currently an officer or employee of the Government of the United States.

Qualifications

You must meet all eligibility and qualification requirements by the closing date of the job announcement.

You must meet the following SCREEN-OUT(S) required for this position.

  • Performs journey-level, commercial Wood Crafting, millwright and Carpentry techniques to set up, adapt, and use computerized machine tools to make and repair high grade wooden items.

Your application must show that you have sufficient training and/or experience to perform the duties of the position as described in the vacancy announcement.

Education

There is no educational requirement.

Additional information

Welcome Veterans. The Veterans Employment Opportunities Act of 1998 (VEOA) gives veterans' preference rights in the legislative branch to certain veterans as applied by the Congressional Accountability Act. Veterans' preference is applied on this vacancy announcement. If you are a veteran and have been separated under honorable conditions, you must submit a copy of your DD-214 or other proof of eligibility; SF-15, if applicable; and Department of Veterans Affairs documentation of disability, if applicable. For more information, please visit  https://www.fedshirevets.gov/


If you are a male applicant born after December 31, 1959, you must certify that you have registered with the Selective Service System.  If you are exempt from registration under Selective Service Law, you must provide appropriate proof of exemption. Please visit the Selective Service System website for more information.

DRUG TESTING: The Architect of the Capitol (AOC) is a Drug Free Workplace. As part of the AOC’s suitability assessment, a candidate tentatively selected for a position who is not currently an AOC employee is required to submit to screening for illegal drug use. Satisfactory completion of a drug test is a condition of employment with the Agency. A candidate must test negative prior to being eligible for appointment into a position. We will schedule, provide and cover the cost for the drug test.
 
The selectee(s) under the vacancy announcement for this position is subject to a criminal record check by the U.S. Capitol Police and satisfactory adjudication to be eligible for employment at the Architect of the Capitol.
 
The Architect of the Capitol is an E-VERIFY Participant. E-VERIFY is an Internet-based system that compares information from an employee's Form I-9, Employment Eligibility Verification, to data from U.S. Department of Homeland Security (DHS) and Social Security Administration records to confirm employment authorization in the United States. If you are selected for this position, the documentation that you present for purposes of completing the DHS Form I-9 will be verified through the DHS "E-VERIFY" electronic system. For more information on E-Verify, please visit http://www.dhs.gov/files/programs/gc_1185221678150.shtm

The Architect of the Capitol is an Equal Opportunity Employer and prohibits discrimination on the basis of race, color, sex, religion, age, national origin, sexual orientation, gender identity, genetic information and/or disability.

This agency provides reasonable accommodation to applicants with disabilities. If you need a reasonable accommodation for any part of the application and hiring process, please notify the agency. The decision on granting reasonable accommodation will be made on a case-by-case basis.
 
Moving expenses are not authorized.
 
Relocation expenses are not authorized.
 
Probationary Period A newly appointed selectee is subject to the completion of a one-year trial/probationary period, regardless of whether or not a trial/probationary period has been completed previously with the Architect of the Capitol or another Federal agency.

This vacancy announcement may be used to fill additional vacancies in any of the jurisdictions of the Architect of the Capitol.

All application materials become the property of the Architect of the Capitol.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Review your resume and responses carefully. Your eligibility for consideration and qualifications for the position will be determined based upon a review of your detailed resume and your responses to job specific self-assessment questions.

Your resume will be evaluated based on evidence of your ability to demonstrate the job elements for this position, possession of any specialized experience, and how well your background and experience relates to the self-assessment questions in the job announcement. The self-assessment questions relate to the following job elements and competencies:

Appropriate Level of Supervision - Knowledge of journey-level, commercial Wood Crafting, millwright and Carpentry techniques to set up, adapt, and use computerized machine tools to make and repair high grade wooden items. (SCREEN-OUT) 

Equipment Assembly, Installation, Repair - Skill to select appropriate wood crafting machines, tools, and techniques, and plan sequences to make the items.

Technical Practices - Ability to work on projects involving high levels of technical complexity, assignment and delivery.

Tools and Equipment- Knowledge of wood crafting techniques to make a variety of office furniture, including cabinets, book shelves, stand up desks, racks, cases, and stands.

Materials (includes measurement and layouts)- Ability to construct projects with steel, concrete, aluminum, acrylic, drywall, brass, glass, bronze, carpet, plastic, fiberglass, rubber, mirrors, stainless steel, grating, concrete planking, steel reinforcing and steel wire mat materials.

Your responses to the self-assessment questions serve as the basis for your initial rating. You will receive a numerical score based on your responses to these questions. Next, your responses will be evaluated by a Human Resources Specialist and/or a subject matter expert against the information provided in your resume and optional cover letter. Your resume must support your answers to the self-assessment questions. Falsifying your background, education and/or experience is cause for non-selection or disqualification from further consideration.

Please note that a complete application is required for consideration. (Please review the “Required Documents” section of this job announcement to see what must be included in a complete application).


You may preview questions for this vacancy.

Architect of the Capitol

The mission of the Architect of the Capitol (AOC) is to serve Congress and the Supreme Court, preserve America's Capitol and inspire memorable experiences. The AOC is responsible for the maintenance, operation, development and preservation of 18.4 million square feet of buildings and more than 570 acres of land throughout Capitol Hill. The AOC provides a welcoming and educational environment for millions of visitors through the U.S. Capitol Visitor Center and the US Botanic Garden. Learn more at https://www.aoc.gov/careers. The AOC prides itself on its Core Values of Respect, Integrity, Safety and Empowerment (RISE).

Agency contact information

Paulette Dixon-Ellis
Phone
202.615.4203
Fax
000-000-0000
Email
Paulette.Dixon-Ellis@aoc.gov
Address
Architect of the Capitol
United States Capitol
Washington, District of Columbia 20515
United States

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.