Clarification from the agency

The IHS is required by law to give absolute preference to qualified applicants who meet the Secretary of the Interior's definition of Indian for appointment to vacancies within the IHS in accordance with established IHS policy as outlined in the Indian Health Manual Part 7, Chapter 3.

Videos

• Plan and assign work to subordinates, set priorities, establish work unit goals and objectives; and plan and establish work schedules for completion of work.
• Plan, direct, appraise, manage, and evaluate the Area Facilities Management program which includes Real Property and Biomedical programs.
• Provide professional engineering and technical consultation services to Area and Service Unit management as well as Tribal leadership in matters relating to health care facilities and staff Quarters maintenance, repair, planning and construction.
• Assess facility needs through surveys, investigations, studies, and by reviews and inspections based on The Joint Commission, Center for Medicare & Medicaid Services, and the Accreditation Association for Ambulatory Health Care standards.
• Initiate, supervise, review, and/or approve engineering designs, site surveys, construction plans and specifications, engineering studies, and completed work for conformance to accepted engineering, public health, public safety, and administration practices and policies.

Conditions of employment

Selectee may be subject to a probationary period
U.S. Citizenship is required
Selective Service Registration is required for males born after 12/31/1959

A one-year supervisory/managerial probationary period may be required upon selection/placement.

IHS Selectees whose duties and responsibilities require them to work permanently, temporarily, or occasionally in an IHS healthcare facility must comply with the IHS Employee Immunization Policy related to vaccine-preventable diseases, consistent with recommendations for healthcare workers. Vaccine exemption requests may be available, as outlined in the IHS Employee Immunization Policy and facility guidance.

Successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit www.dhs.gov/E-Verify/.

You will need to set up direct deposit so we can pay you.

Background Investigation: If you are selected for this vacancy, you must undergo a pre-employment fingerprint check and background investigation. Fingerprint results and background investigation documentation must be cleared prior to hire. After you begin your employment, your continued employment is contingent upon the outcome of a complete background investigation as determined by the sensitivity level of your position. The investigation must find that you are suitable for Federal employment in your position. If you are found not suitable, you will be terminated after you begin work. If you make a false statement in any part of your application, you may not be hired; you may be fired after you begin work; or subject to possible criminal charges. You may be subject to a credit check as a part of the background investigation process.

Prior to the appointment, candidates must present two valid forms of identification. If one of the documents is a state-issued ID or driver's license, it must be REAL ID-compliant.

Qualifications

To qualify for this position, your resume must state sufficient experience and/or education, to perform the duties of the specific position for which you are applying.

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; social). You will receive credit for all qualifying experience, including volunteer and part time experience. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

BASIC REQUIREMENT(S):
Individual Occupational Requirements
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)

In addition, to the Basic Requirements, you must also meet the Minimum Qualifications stated below-

MINIMUM QUALIFICATIONS:
Your resume must demonstrate at least one (1) year of specialized experience equivalent to at least the next lower grade level in the Federal service obtained in either the private or public sector performing the following type of work and/or tasks: Experience applying engineering principles, concepts, and practices to solve practical engineering problems with sound engineering judgment, resourcefulness, and intuitive planning. Experience in overseeing a diverse workforce including developing goals and objectives of a facility management program such as preparing policies, procedures, and guidelines for implementing preventative and operations maintenance. Experience in serving as project manager for sustainability activities. Experience in reviewing architectural and engineering drawings for new building construction. Experience in performing administrative activities to effectively conduct a facilities management program.

Selective Factor
Applicant must show proof of registration as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico AND Certified Energy Manager (C.E.M.) certification by the Association of Energy Engineers.

You must meet all qualification requirements within 30 days of the closing date of the announcement.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

You will be evaluated for this job based on how well you meet the qualifications above.

Once the application process is complete, the first two pages of your resume and supporting documentation will be used to determine whether you meet the job qualifications.

Structured Resume Review: Subject matter experts (SMEs) will review your resume to determine your technical qualifications for this position based on the required competencies. SMEs will review ONLY the first two (2) pages of your resume. SMEs will not review additional information beyond your resume (e.g., cover letter, links embedded in your resume).

Once the announcement closes, we will conduct a review of your application package to verify your eligibility and qualifications. If you are found qualified, your application will move forward to additional phases of the review process.

To ensure a fair and consistent hiring process, IHS uses a multi-hurdle assessment process. Each "hurdle" must be passed before moving to the next step. This helps us evaluate applicants based on job-related qualifications, competencies, and experience.

Below is what applicants can expect:
________________________________________
1. Minimum Qualifications Review - Hurdle 1
HR reviews your resume to confirm you meet the eligibility and minimum qualifications for the position (education and/or licensure (if applicable), listed above).
Note: the first two pages of your resume and supporting documentation will be used to determine whether you meet the minimum qualifications.
If you meet eligibility and minimum qualifications, you move to the next hurdle.
2. Technical Assessment (Subject Matter Expert Resume Review) - Hurdle 2
A panel of subject matter experts (SME) will review your resume to determine whether you clearly show the required specialized experience listed below.

Experience applying engineering principles, concepts, and practices to solve practical engineering problems with sound engineering judgment, resourcefulness, and intuitive planning. Experience in overseeing a diverse workforce including developing goals and objectives of a facility management program such as preparing policies, procedures, and guidelines for implementing preventative and operations maintenance. Experience in serving as project manager for sustainability activities. Experience in reviewing architectural and engineering drawings for new building construction. Experience in performing administrative activities to effectively conduct a facilities management program.

Note: SMEs will review ONLY the first two (2) pages of your resume. SMEs will not review additional information beyond your resume (e.g., cover letter, links embedded in your resume).

This assessment is Pass/Fail.

Applicants who demonstrate the required experience will advance.

Demonstration of these specialized experience statements ascertain your competency in the following:

• Oral Communication
• Planning and Evaluating
• Technical Competence