Skip to main content
U.S. flag
 

MACHINIST

Department of the Army
Army Tank-Automotive and Armament Command (TACOM)
MACHINING BRANCH ANNISTON 53A11

Summary

About the Position: The Anniston Army Depot is located in Anniston, Alabama in the foothills of the Appalachian Mountain chain halfway between Atlanta, GA and Birmingham, AL just off Interstate 20. The Depot is the largest employer in Calhoun County with approximately 4000 employees.

Overview

Help
Location
1 vacancy in the following location:
Work site options
Telework eligible
No
Remote job
No
Relocation expenses reimbursed
No
Salary
$32.53 - $37.96 per hour
Pay scale & grade
WG 11
Promotion potential
None
Pay scale and grade determines the salary of the job.
Work schedule
Full-time
Travel Required
Not required
Appointment type
Permanent - Term, not to exceed 1 year 1 day
Occupations and job series
Supervisory status
No
Federal service type
This job is in the Competitive Service
Represented by a union
No
Drug test
No
Security clearance
Not Required
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Jobs require a background check and some require a security clearance. The type depends on the job.
Background check type
Financial disclosure required
No
Some jobs require financial disclosure to identify conflicts of interests.
Announcement number
MCGM-26-13058736
Control number
883863000

Videos

Duties

Help
  • Prepare techniques to perform machining duties for other machinist.
  • Use machining methods in repairing components for maintenance mission components.
  • Apply a variety of metalizing processes to repair metal.
  • Use multiple fixtures common to the trade.
  • Perform machining work requiring the use of most non-conventional machine tools.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • Federal Wage System employees, WG/WL/WS etc. must satisfactorily complete and pass the appropriate annual Depot Medical Examination.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.

  • Position may be filled as a Term Appointment NTE 1 year and 1 day. Term appointments may be extended beyond of six(6) years, up to eight (8) years. With DoD approval, Term appointments may be extended beyond eight (8) years.
  • Current permanent Federal employees (to include permanent Army Employees) applying for a TERM appointment will be appointed/converted into a TERM appointment with No statutory return rights back to a permanent position.

  • Interagency Career Transition Assistance Plan
  • Military Spouses, under Executive Order (E.O.) 13473
  • Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible
  • Reinstatement


Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience.

There is no specific length of training or experience required. However, you must be able to demonstrate, through experience shown in your written application materials that you possess the sufficient knowledge, skills, and abilities to successfully perform the work of this position without more than normal supervision.

Minimum Qualifications (Screen Out Element): Ability to Inspect as a MACHINIST I have the ability to perform common Machining, using various techniques, materials, jigs, and fixtures common to the trade. I work under close supervision of a work leader or journey-level employee who observes tasks in progress and upon completion to make sure they are properly informed. - Failure to meet this Screen Out Element will result in an ineligible rating. Failure to meet this Screen Out Element will result in an ineligible rating.
  • Ability To Inspect
  • Ability to Use Hand Tools for Machine Shop
  • Ability to Use Shop Drawings
  • Knowledge of Metals
  • Measurement and Layout
  • Operation of Machine Tools
  • Technical Practices (Theoretical, Precise, Artistic)


Physical Effort:
Work is performed in sitting and standing positions. Incumbent is also required to stand, stoop, bend, and reach. Occasionally is required to lift items weighing 15-25 pounds. Requires manual dexterity and deftness when performing many of the required operations.

Working Conditions:
Work is performed in shop that is well lighted, heated, cooled and ventilated. Incumbent is subject to hazardous fumes and burns when working with high temperature coatings and furnaces. Incumbent is required to wear safety goggles, face shields, respirators and heat resistant gloves when working with heat treated or high temperature coated components. Incumbent is exposed to disagreeable odors and there is danger to skin and eyes from flying metal chips, abrasive particles and hot metal, skin irritation from contact with coolants, lubricants and abrasive compounds.

Ensures that hazardous materials/waste within work area are handled/processed within operating guidelines. Guidance for the proper handling of hazardous materials/waste is obtained through formal training efforts and specific guidance issued by the supervisor. Ensures that storage drums, and other containers housing hazardous materials/waste are properly labeled and secured at all times and reports any deficiencies to the supervisor. Properly disposes of hazardous materials/waste used/generated at work site. Immediately notifies supervisor of any accident or spill and initiates response actions as directed by supervisor. Since exposure to hazardous materials/waste is possible, wears protective clothing and equipment (e.g., rubber boots, coveralls, goggles, aprons, gloves, respirator, etc.) as situations warrant.

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • This position may require a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest.
  • Direct deposit of pay is required.
  • This is a 17 Career Field Logistics position.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • Recruitment Incentives may be authorized.
  • Relocation Incentives may be authorized.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.

You may claim Military Spouse preference.

Military Spouse Preference (MSP) applicants will receive preference consideration and will be placed (if selected) at the highest grade for which they have applied and are determined best qualified, up to and including the full performance level.

You may claim Priority Placement Program (PPP) preference.

DoD Priority Placement Program (PPP) Applicants will receive preference consideration at the full-performance grade level only.

Only MSP/PPP applicants currently occupying a formal training program position are entitled to exercise their priority status.

Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.

Army Tank-Automotive and Armament Command (TACOM)

Civilian employees serve a vital role in supporting the Army mission. They provide the skills that are not readily available in the military, but crucial to support military operations. The Army integrates the talents and skills of its military and civilian members to form a Total Army.

The Army values diversity of perspectives, backgrounds, cultures and skills, which connects employees to organizations that are committed to building an inclusive work environment where they can contribute to their fullest potential.

Agency contact information

Army Applicant Help Desk
Website
https://portal.chra.army.mil/hr_public?id=app_inq
Address
GM-W0LXAA US ARMY TACOM ANNISTON ARMY DEPOT
DO NOT MAIL
Anniston, AL 36201
US

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.