Clarification from the agency

This announcement is open to U.S. Citizens or Nationals; and Career transition eligibles (CTAP, ICTAP, RPL). This position will be filled under the Office of Personnel Management's Direct-Hire Authority. Veterans' Preference and traditional rating and ranking of applications do not apply. Qualified veterans will, however, be given full consideration for this position.

Videos

Some of the major duties you will perform include but are not limited to the following:

• Serves as a Project Manager to coordinate and provide expert project management of water resources engineering projects from the feasibility level through design, construction, and ultimate turnover to project beneficiaries.
• Works with federal representatives and stakeholders to identify project tasks, including scope of work, purpose, timing, and resource allocations.
• Initiates, manages, administers, and approves plans that translate project objectives into completed functional phases.
• Plans, programs, and oversees cost and schedule execution of project planning, design, and construction. Evaluates status of projects against established milestones and objectives.
• Participates on various water resources technical teams and recommends solutions to problems for which accepted methods are not directly applicable.
• Reviews plans, proposals, and specifications prepared by others for the improvement or alteration of existing and proposed water projects.
• Negotiates and resolves any differences on sensitive policy and project planning issues.

Conditions of employment

• Must be a U.S. Citizen or National.
• Appointment subject to background investigation and favorable adjudication.
• Males born after 12-31-59 must be registered for Selective Service.
• Direct Deposit participation required.
• Successfully pass the E-Verify employment verification check. To learn more, visit www.dhs.gov/EVerify/.
• A financial disclosure report will be required within 30 days of appointment.

As a condition of employment for accepting this position, you will be required to serve a 1-year probationary period during which your fitness and whether your continued employment advances the public interest will be evaluated.

This probationary period is an extension of the appointment process and therefore requires the agency to determine if continued employment would advance the public interest, meet the organization goals and mission of the agency, and/or otherwise promote the efficiency of the service. In determining if your employment advances the public interest, the agency will consider:

• your performance and conduct;
• the needs and interests of the agency;
• whether your continued employment would advance organizational goals of the agency or the Government; and
• whether your continued employment would advance the efficiency of the Federal service.

Under applicable law, the employment of an individual serving a probationary or trial period automatically terminates when that period ends unless the agency affirmatively certifies, in writing, that the individual's employment should continue and that their appointment should be finalized. In the absence of agency action to affirmatively certify continued employment beyond the probationary or trial period, such appointments are terminated.

Upon completion of your probationary period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.

Qualifications

Qualifications:

All qualifications must be met by the closing date of this announcement-09/11/2026-unless otherwise stated in this vacancy announcement.

To receive credit for experience, your resume MUST state either "full-time" (or "40 hours a week") or "part-time" with the number of hours worked per week to ensure proper crediting of specialized experience. Failure to adequately provide information needed to determine number of hours worked in each position may result in that time not being credited when evaluating qualifying experience. For periods of time that reflect military service, the DD-214 or Statement of Service is sufficient to meet the full and/or part-time hours requirement as the service dates will be reflected.

Selective Placement Factor: This position requires a special qualification that has been determined to be essential to perform the duties and will be used as a screen out element. If you do not provide evidence that you possess the following selective factor(s), you will be rated not qualified. A professional Engineer License is required for this position.

Minimum Qualification Requirements: To qualify for this position, you must meet the following minimum qualifications:

Basic Educational Requirement AND Specialized Experience for the series to which you are applying.

Basic Educational Requirements: In addition to the specialized experience requirements for this position, you must meet at least one of the following:

A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

-OR-

B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT) , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.

3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

To qualify for this position at the GS-13 grade level:
Specialized Experience Requirement: you must possess at least one full year of specialized experience equivalent to the GS-12 level in the Federal service (obtained in either the public or private sectors). Specialized experience is defined as demonstrated experience as a project manager coordinating and providing expert project management of water resources engineering projects from feasibility through design and construction; performing the full range of project management activities, including public involvement, identification of alternatives, coordination of NEPA and ESA compliance, fiscal planning and oversight, verification of compliance with applicable laws and regulations, and interpretation and implementation of policies and procedures; projects may include dams, water diversion structures, bridges, levees, river control structures, fish screens, fish passage, environmental restoration activities or other complex structures or programs.

Volunteer Experience: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Your qualifications will be evaluated based on your application materials (e.g. resume, supporting documents), the responses you provide on the application questionnaire, and the result of any additional assessment(s) required for this position.

Your resume must not exceed 2 pages. Only the document submitted as the "Resume" under the Documents section will be used to determine your qualifications/eligibility and for rating purposes. In the event you submit more than one resume, only the latest submission will be reviewed.

You will be assessed in the following competencies (knowledge, skills, abilities, and other characteristics):

• Civil Engineering
• Influencing/Negotiating
• Project Management
• Technical Competence

Overstating your qualifications and/or experience in your application materials or application questionnaire may result in your removal from consideration. Cheating on an assessment may also result in your removal from consideration.

To be considered for this position, you must complete all required steps in the process. In addition to the application and application questionnaire, this position requires successful completion of additional assessment(s), including a structured resume review. These assessments measure the critical competencies listed above that are required to successfully perform the job.

Current or former displaced Federal employees who are surplus, displaced, or involuntarily separated have special priority selection rights under the Agency Career Transition Assistance Program (CTAP) or the Interagency Career Transition Assistance Program (ICTAP). To be considered under CTAP/ICTAP, you must be well-qualified, score at least 85 (i.e., meet the minimum qualification requirements, including any selective placement factors; education, and experience requirements), and be able to perform the duties of the position upon entry.

Providing false or misleading information on your resume or supporting documentation may result in removal from consideration or other action consistent with applicable federal hiring regulations. Applicants who include vulgar, offensive, or inappropriate language or information in their application package will be ineligible for further consideration for this position.