Skip to main content
U.S. flag
 

General Engineer

Department of the Army
U.S. Army Joint Munitions Command
Directorate of Chemical and Biological Defense Operations

Summary

This position is located at Pine Bluff Arsenal in Pine Bluff Arkansas. This position serves as General Engineer, performing studies, conducting investigations and analyzing various operations to determine ways to improve methods, reduce costs, and increase efficiency while alleviating hazards.

Overview

Help
Accepting applications
Location
1 vacancy in the following location:
Work site options
Telework eligible
Yes—Eligible for situational telework only.
Remote job
No
Relocation expenses reimbursed
Yes—Relocation costs may be paid if the selecting official determines the relocation is in the best interests of the Government.
Salary
$89,508 - $116,362 per year
Pay scale & grade
GS 12
Promotion potential
None
Pay scale and grade determines the salary of the job.
Work schedule
Full-time
Travel Required
Occasional travel - You may be expected to travel for this position.
Appointment type
Permanent
Occupations and job series
Supervisory status
No
Federal service type
This job is in the Competitive Service
Represented by a union
Yes
Drug test
No
Security clearance
Not Required
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Jobs require a background check and some require a security clearance. The type depends on the job.
Background check type
Financial disclosure required
No
Some jobs require financial disclosure to identify conflicts of interests.
Announcement number
MCGL-26-13022470-MP
Control number
880034700

Videos

Duties

Help
  • Adjusts and applies established engineering practices in making significant changes to facilities, processes, line layouts, etc., to solve operational problems.
  • Conducts research for facilities and equipment improvements and procurements, gathers data from industry experts and local Subject Matter Experts (SMEs), and develops cost data analyses utilizing Command provided software.
  • Coordinates in-house system analyses and evaluation of contractor's analyses to determine the effects that design or proposed changes in design will have on performance and operating requirements.
  • Prepares economic analyses in accordance with guidance from Command Staff and higher headquarters.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation. This position requires a Secret security clearance, must be able to obtain and maintain for the duration of appointment.
  • This position may require participation in the Chemical Incident or Mishap Response and Assistance (CIMRA) situations and serve on teams dedicated to mitigating CIMRA situations, after being trained for the particular duty.
  • Temporary Duty Travel (TDY) 5% or more (may be less if requested by management).

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.

  • Current Department of Army Civilian Employees
  • Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel Workforce
  • Interagency Career Transition Assistance Plan
  • Land Management Workforce Flexibility Act
  • Military Spouses, under Executive Order (E.O.) 13473
  • Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible
  • Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible
  • Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement
  • Priority Placement Program, DoD Retained Grade Preference Eligible
  • Veterans Employment Opportunity Act (VEOA) of 1998


In order to qualify, you must meet the experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

BASIC REQUIREMENT for General Engineer (0801) Series:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Specialized Experience: One year of specialized experience which includes: Performing studies and conducting investigations on various processes; Determining methods to improve productivity; Preparing economic analyses; Developing cost data analyses using various software. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).

You will be evaluated on the basis of your level of competency in the following areas:

  • Attention to Detail
  • Customer Service
  • Decision Making
  • Flexibility
  • Influencing/Negotiating
  • Integrity/Honesty
  • Interpersonal Skills
  • Learning
  • Reading Comprehension
  • Reasoning
  • Self-Management
  • Stress Tolerance
  • Teamwork


Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: http://www.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html.

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • Two year trial/probationary period may be required.
  • Direct deposit of pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a Career Program (CP) 16 Engineers and Scientists (Non-Construction) position.
  • You may claim military spouse preference (MSP).
  • If a MSP applicant is determined best qualified and selected, placement must be at the full performance level for priority consideration.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction/ for more information.
  • If you are unable to apply online or need to fax a document you do not have in electronic form, view the following link for information regarding an Alternate Application.
  • Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.
  • Defense National Relocation Program will not be authorized.
  • Relocation Incentive MAY be authorized.
  • Recruitment Incentive MAY be authorized.
  • Retention Incentive will not be authorized.
  • This position requires a 1 year trial/probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest.
  • This government establishment requires a REAL ID compliant identification for base access.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

You will be evaluated based on how well you meet the qualifications listed in this vacancy announcement. Your qualifications will be evaluated based on your application materials (e.g., resume, supporting documents), the responses you provide on the application questionnaire, and the result of the online assessments required for this position. You will be assessed on the following competencies (knowledge, skills, abilities, and other characteristics):

  • Attention to Detail
  • Customer Service
  • Decision Making
  • Flexibility
  • Influencing/Negotiating
  • Integrity/Honesty
  • Interpersonal Skills
  • Learning
  • Reading Comprehension
  • Reasoning
  • Self-Management
  • Stress Tolerance
  • Teamwork



Overstating your qualifications and/or experience in your application materials or application questionnaire may result in your removal from consideration. Cheating on the online assessment may also result in your removal from consideration.

You may claim Military Spouse preference.

You may claim Priority Placement Program (PPP) preference.


Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.

U.S. Army Joint Munitions Command

Looking to make a difference? Join our team!

Army Sustainment Command (ASC) provides globally responsive strategic logistics capabilities and materiel readiness to enable Combatant Commanders to conduct the full range of military operations. ASC is the Army Materiel Command's (AMC) single face to the field and synchronizes and executes logistics. ASC is the Army materiel enterprise's decisive edge generating sustainment readiness from the strategic support area to the tactical point of need.

Learn more about the Army Sustainment Command at https://www.aschq.army.mil/.

Agency contact information

Army Applicant Help Desk
Website
https://portal.chra.army.mil/hr_public?id=app_inq
Address
GL-W0K4AA US ARMY PINE BLUFF ARSENAL
DO NOT MAIL
Pine Bluff, AR 71602
US

Visit our careers page

Learn more about what it's like to work at U.S. Army Joint Munitions Command, what the agency does, and about the types of careers this agency offers.

https://www.amc.army.mil

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.