Clarification from the agency

This position is open to current on-board Title 5 and Title 32 employees of the Iowa Army National Guard. Military membership is required.

As a AMMUNITION INSPECTOR, WG-6501-8 your duties are below.

1. Performs Ammunition Inspections pertaining to the receipt, classification, storage, issue and shipment of ammunition items. May receive shipments of all types of ammunition and verify DA form 1348 against Depot surveillance Records for correct NSN and Condition Code. Insures commercial carrier delivering ammunition has been inspected in accordance with regulations and standing operating procedures. Verifies quantity of containers for accuracy of nomenclature, stock and lot numbers against shipping documents and signs for shipments. Receives turn-ins from using organizations, counts each item received and inspects for serviceability. Classifies material to assure compatibility of explosive items. Studies new material to determine how it functions, how it is constructed and compatibility for storage purposes according to technical manuals.
2. Conducts inspection of ammunition being turned-in to determine suitability for further training needs. Takes appropriate steps in this disposition of CCH material. Ammunition Condition Reports (ACRs) are prepared and sent to item manager for disposition of restricted and/or suspended items. If disposition is determined to be locally demilitarized; contact designated EOD team and assist with demilitarization mission..
3. Prepares items for shipment to other depots and/or installations. Using the correct DOT regulations and packing requirements, makes sure all shipments meet DOT requirements. Items to be shipped are palletized and banded according to the hazard class division. Takes each pallet and establishes the correct weight and cube. Uses appropriate technical manuals, determines the proper name and UN number. Using this information, the appropriate 1348's are filled out and sent to Transportation Officer. Studies new material to determine how it functions, how it is constructed and compatibility for storage purposes according to technical manuals.
4. Verification Inspection. Performs a variety of routine and special inspections of conventional ammunition. Performs quality monitoring of maintenance operations, area inspections magazine storage inspections and basic load inspections. Assists QASAS when requested. Maintains a variety of publications, regulations and files pertaining to work of the unit. The following are typical, but not all inclusive examples of work performed:Performs periodic, storage and special inspections and tests to determine quality safety and condition of a wide variety of ammunition, subcomponents, and materials used in the maintenance, modification and manufacture of ammunition items. Inspects such items as small arms ammunition, artillery and mortar ammunition, rockets, missiles, mines, grenades, bulk high explosives, propellants and propelling charges, etc. Inspects container, checks rounds and other items for defects and deterioration, and separates any questionable items for further inspection. Under the technical direction of a Quality Assurance Specialist Ammunition Surveillance (QASAS) or designated representative, assists in the disassembly of ammunition and components to make inspections.
5. Demilitarization Inspections. Monitors ammunition and explosive related operations at firing sites and demilitarization areas for adherence to regulations and procedures concerning explosives, compatibility, quantity distance, explosive and personnel limits, transportation and utilization of protective equipment. Inspects ammunition and components using appropriate Ammunition Surveillance Procedures.
6. Transportation Related Inspections. Inspects empty military vans and trucks to insure that carriers meet standards for transporting ammunition, explosives, and other hazardous materials. Performs inspections of incoming and outgoing vehicles for blocking and bracing, compatibility and compliance with applicable storage and out loading drawings security requirements, as well as compliance with applicable DOT regulations.
7. Inspects storage facilities for proper storage, packaging, warehousing, structural defects, cleanliness, ammunition compatibility and compliance with Quantity-Distance requirements or applicable explosive safety waivers. Inspects lightning protection systems for proper grounding. Inspects ammunition items in storage for container condition, presence of fumes, external deterioration and marking, reporting any discrepancies or unsafe conditions to supervising QASAS or designated representative. Spot checks accountability and stock accounting procedures.
8. Propellant Inspections. Inspects propelling charge containers and bulk propellants in storage. Inspects condition of powder bags for service-ability, safety, and markings. Checks containers for Serviceability and storage discrepancies and report's findings to QASAS or designated representative for action or implements correction actions.
9. Performs other duties as assigned. D2280

Conditions of employment

NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted position that requires military membership in a compatible military assignment in the Iowa Army National Guard. Selectee will be required to wear the military uniform. Acceptance of this excepted position constitutes concurrence with these requirements as a condition of employment.

APPLICATION MATERIALS MUST BE RECEIVED BY 08/21/2026 . FAILURE TO PROVIDE COMPLETE INFORMATION MAY RESULT IN YOUR NOT RECEIVING CONSIDERATION FOR THIS POSITION. Please refer to the Qualifications and Evaluations Section of this Announcement to understand the qualification requirements, and the How to Apply Section for detailed instruction on applying.

SECURITY CLEARANCE REQUIREMENT: Employment is subject to attaining and maintaining a clearance as required by this position. If the selectee does not possess the applicable security clearance when hired, application must be made within 30 days of the start date. Failure to make application for the required security clearance will result in termination of employment.

Failure to complete prescribed courses may be cause for reassignment or termination of FTS.

Military Rank Requirements: ENLISTED MEMBERS (E-3 to E-5)

Qualifications

In describing your experience, please be clear and specific. We will not make assumptions regarding your experience. Applicants who do not fully address the minimum/specialized experience needed for the position in their resume will not be referred for consideration. Your resume must contain your own words. Resumes that are verbatim, from this announcement, any PD's, or any other applicants will not be considered.

MINIMUM REQUIREMENTS: Experience or training which demonstrates the ability to use and maintain tools and equipment associated with the type of work to be done, and to understand and follow oral and written instructions. Experience which demonstrates the knowledge of and the ability to apply safety standards.

SPECIALIZED EXPERIENCE REQUIREMENTS: WG-6501-8: Must haveexperience in the following:

1. Experience or training handling and the ability to learn how to destroy explosives and toxic materials; follow safety procedures in the handling of ammunition, explosives and toxic materials.
2. Experience which demonstrates the ability to use radial monitoring instruments, photographs, chemical analyses and x-ray equipment.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are found to be among the qualified candidates, you will be referred to the selecting official for employment consideration.

Verbiage displayed on your resume or application must contain your own words. You may refer to position descriptions, i.e. the general and specialized experience located within the vacancy announcement, to assist with describing work experiences; however, resumes or applications received in verbatim will not be considered. In your resume you will need to address the general and specialized experience listed above. Please use as much detail as needed, giving dates (months and years) of the experience, position title and how the experience was gained. This information is needed to determine if you are qualified for the position.

Knowledge, Skills and Abilities required for this position:

1. Skill and knowledge necessary to recommend serviceability and detect hazardous or nonstandard conditions of ammunition and explosive items by visual examination or by use of test equipment.Technical knowledge of a variety of ammunition. Must be able to read, understand and research technical drawings, specifications, data sheets, serviceability standards, and technical manuals for ammunition and explosive items.
2. Knowledge of regulations and standards for safety in receiving, shipping, storing, and handling of ammunition and explosives. Knowledge of inspection criteria related to commercial and military vehicles for unsafe mechanical conditions prior to loading with ammunition and explosives.
3. Knowledge of environmental rules and regulations to ensure ASP has no infractions.
4. Ability to operate motor vehicles and forklifts for loading/unloading, transportation, and storage of A&E materials.