Skip to main content
U.S. flag
 

General Maintenance Mechanic Supervisor

Department of the Army
U.S. Army Corps of Engineers
Vicksburg District, Operations Division, River Operations Branch, Maintenance Section

Summary

About the Position: Serving as a working supervisor, exercising technical and administrative supervision over a group of section employees, performing work on USACE structures and plant equipment including: miter and sector gate locks, dam structures, sluice gate structures, flap gate structures, mooring pilings and docks, tow boats, crane barges,and diesel and gasoline operated mobile equipment.

Overview

Help
Accepting applications
Posted yesterday · Apply by 08/11/26
Due by 11:59 p.m. ET on August 11, 2026
Location
1 vacancy in the following locations:
Work site options
Telework eligible
No
Remote job
No
Relocation expenses reimbursed
No
Salary
$39.03 - $60.89 per hour
Pay scale & grade
WS 11
Promotion potential
None
Pay scale and grade determines the salary of the job.
Work schedule
Full-time
Travel Required
75% or less - You may be expected to travel up to 75% for this position.
Appointment type
Permanent
Supervisory status
Yes
Federal service type
This job is in the Competitive Service
Represented by a union
No
Drug test
Yes
Security clearance
Not Required
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Jobs require a background check and some require a security clearance. The type depends on the job.
Background check type
Financial disclosure required
No
Some jobs require financial disclosure to identify conflicts of interests.
Announcement number
CEDC-26-13021790-MP
Control number
878320000

Videos

Duties

Help
  • Conduct the full range of diagnostic maintenance inspections, preventive maintenance, repairs, parts replacement, and/or major overhaul on all lock operating systems, machinery, structural components, and related equipment.
  • Determine extent of repairs and rebuilding required for lock operating systems, machinery, structural components and related equipment.
  • Establish deadlines and priorities on the basis of general work schedules.
  • Conduct on-the-job training for employees.
  • Explain work requirements, methods, and procedures to subordinates.
  • Coordinate work with other crews/supervisors that may be involved in the work site project.
  • Participate in planning current and future work schedules, budget requests, staffing needs, etc.
  • Develop performance standards for employees based on performance.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • This position requires the completion of a pre-employment Physical Examination and an annual examination thereafter to ensure the continued, required level of physical health and ability or fitness to perform the duties of the position.
  • This position meets the criteria for pre-employment and random drug and alcohol testing under the Department of Army Drug-Free Workplace Program as supplemented by USACE ER 690-1-1218.
  • Must currently possess and maintain a Class A Commercial Driver's License. (Note: A copy of your valid Class 'A' Commercial Driver's License must be submitted with your application.)
  • Must currently possess and maintain a 4G welding certification. (NOTE: A copy of your VALID 4G certification in welding must be submitted with your application.)
  • This position has a Temporary Duty (TDY) or business travel requirement up to 75%.
  • Position may be designated Mission Essential.
  • This position has a requirement to lift 50lbs.
  • One-year Supervisory probation may be required.
  • Position is designated as Non-Sensitive-No access is required.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.

  • Current Department of Army Civilian Employees
  • Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel Workforce
  • Interagency Career Transition Assistance Plan
  • Land Management Workforce Flexibility Act
  • Military Spouses, under Executive Order (E.O.) 13473
  • Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible
  • Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible
  • Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement
  • Priority Placement Program, DoD Retained Grade Preference Eligible
  • Veterans Employment Opportunity Act (VEOA) of 1998


Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience.

There is no specific length of training or experience required. However, you must be able to demonstrate, through experience shown in your written application materials that you possess the sufficient knowledge, skills, and abilities to successfully perform the work of this position without more than normal supervision.

Minimum Qualifications (Screen Out Element): Ability to do the work of a(n) General Maintenance Mechanic Supervisor without more than normal supervision. I have the ability to perform common task which includes: preventative maintenance inspections, parts replacement and/or major overhaul on all lock operating systems and equipment; regularly operates a large mobile crane in a work area restricted in maneuverability; and making a wide range of welds varying from simple to precision welding using flat, vertical and overhead positions. - Failure to meet this Screen Out Element will result in an ineligible rating.

  • Ability to Do the Work of the Position without More Than Normal Supervision
  • Ability to Interpret Instructions, Specifications, etc. (Includes Blueprint Reading)
  • Ability to Lead or Supervise
  • Knowledge of Equipment Assembly, Installation, and Repair, etc.
  • Technical Practices (Theoretical, Precise, Artistic)
  • Physical Efforts: Work normally requires frequent standing, stooping, stretching, climbing, and crouching. Lifting and carrying items weighing up to 50 pounds. For the purpose of accommodating an employee's physical limitations, the dexterity requirements are being reduced from frequently to occasionally and the lifting requirements reduced to occasional lifting not to exceed 15 pounds from floor to knee level, 20 pounds above the shoulders, and 30 pounds from knee to chest level. Carries objects weighing up to 30 pounds for short distance on an occasional basis. All major duties of the position performed in locations where extensive standing, stooping, stretching, climbing and lifting are not necessary to effectively accomplish the tasks. Uses normal coordination of eyes, hands, legs and body in installing, repairing, operating, or testing equipment in locations easily accessible such as lockwalls, machinery recesses, lock chambers maintenance shops and yards. Occasionally climbs short ladders (i.e., to gain access to crane cab and machinery recess, etc.). Occasionally works from scaffolding and suspended stages. Directs lower graded employees to assist and to accomplish heavy lifting and carrying.
  • Working Conditions: Works inside and outside during the day or night, subject to inclement weather, on high structures usually over water which is frequently turbulent, in the proximity of moving machinery and high voltage electrical equipment on scaffolds and from slings. Occasionally will work behind bulkheads below the water level. Incumbent is also subject to falls, drowning, injury or discomfort and when inside, exposure to drafts, changing temperatures, and loud noises. Uses safety equipment such as protective ear devices, hard hats, hard toe shoes, respirators, and protective clothing. Is normally assigned to the day shift but is subject to call during other shifts in case of extreme emergency or other conditions requiring round-the-clock repair activities to restore lock to operational status.

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • This position requires a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest.
  • Appointment is subject to the completion of a favorable suitability or fitness determination, as determined by a background investigation.
  • Position is designated as Non-Sensitive-No access is required.
  • Direct deposit of pay is required.
  • This is a(n) Logistics Career Field position.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.
  • This position is Exempt from the Fair Labor Standards Act.
  • Nepotism: Under the provisions of 5 USC 3110, an individual may not be appointed into a position if the position is under the supervisory chain of command of a relative.
  • All qualification requirements must be met by the closing date of this announcement.
  • This announcement may be used to fill like vacancies for three months after the closing date.
  • Position may be filled at Colfax, LA or Vicksburg, MS.
  • Must currently possess and maintain a 4G welding certification. (A copy of your VALID 4G certification in welding must be submitted with your application in order to be considered eligible for this position.)
  • Must currently possess and maintain a Class A Commercial Driver's License. (A copy of your valid Class 'A' Commercial Driver's License must be submitted with this application in order to be considered eligible for this position.)

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.

You may claim Military Spouse preference.

You may claim Priority Placement Program (PPP) preference.

Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.

U.S. Army Corps of Engineers

At the U.S. Army Corps of Engineers (USACE), we do not just construct infrastructure; we engineer the future of our Nation. From securing vital water resource infrastructure and restoring fragile ecosystems to designing world-class facilities for our armed forces and responding to natural disasters, our work touches lives every day.

By joining USACE, you will have the opportunity to contribute to high-impact, meaningful projects, collaborate with a diverse network of dedicated professionals, and advance your career. Here, your skills do not just build structures; they build national resilience, protect local communities, and support a safer, stronger tomorrow.

Build Strong With Us - explore our opportunities and engineer your legacy today.

Agency contact information

Army Applicant Help Desk
Website
https://portal.chra.army.mil/hr_public?id=app_inq
Address
RG-W2R904 US ARMY ENGINEER DISTRICT-VICKSBURG
DO NOT MAIL
Vicksburg, MS 39183
US

Visit our careers page

Learn more about what it's like to work at U.S. Army Corps of Engineers, what the agency does, and about the types of careers this agency offers.

https://www.usace.army.mil/Careers/

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.