Skip to main content
U.S. flag
 

Civil Engineer (Hydraulics)

Department of the Army
U.S. Army Corps of Engineers
Engineering and Construction Division, Hydrology and Hydraulics Branch

Summary

About the Position: Serve as a hydraulic engineer for the Rock Island District to deliver vital engineering solutions including: small and large-scale navigation improvement, small and large-scale ecosystem restoration, local and regional flood risk management, and routine water management efforts.

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service.

Overview

Help
Accepting applications
Posted yesterday · Apply by 08/04/26
Due by 11:59 p.m. ET on August 4, 2026
Location
Work site options
Telework eligible
Yes—as determined by the agency policy.
Remote job
No
Relocation expenses reimbursed
No
Salary
$45,239 - $118,221 per year
Pay scale & grade
GS 5 - 12
Promotion potential
12
Pay scale and grade determines the salary of the job.
Work schedule
Full-time
Travel Required
25% or less - Up to 25% business travel may be required.
Appointment type
Permanent
Occupations and job series
Supervisory status
No
Federal service type
This job is in the Competitive Service
Represented by a union
No
Drug test
No
Security clearance
Not Required
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Jobs require a background check and some require a security clearance. The type depends on the job.
Background check type
Financial disclosure required
No
Some jobs require financial disclosure to identify conflicts of interests.
Announcement number
CEDC-26-13019531-DHA
Control number
877806900

Videos

Duties

Help
  • The below duties are that of the full performance grade level of GS-12:
  • Carry out tasks, methods, procedures, and computations based on oral instructions and/or precedents, guidelines, and standards.
  • Collect, compile, analyze, interpret and/or evaluate a variety of data pertinent to studies and evaluations.
  • Prepare analytical data for use in designing flood control reservoir and appurtenant features.
  • Analyze flow characteristics; design drainage structures; evaluate facility (e.g., reservoirs, canals, pipelines, pumping plants) capacities and operation.
  • Participate in meetings and conferences to discuss project plans and provide guidance on matters relating to hydraulic engineering.
  • Serve as point of contact with groups inside and outside the organization for the purpose of coordinating assigned studies.
  • Provide status of progress, any potential problems, concerns, or issues, developments/changes to plans and/or methodology.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • Must possess a valid State driver's license for the class of vehicle being operated based on site specific, job related requirements, and must maintain this license.

Qualifications

Who May Apply: US Citizens

In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

** Basic Requirement for Civil Engineer (Hydraulic) Series is listed in the "Education" Section of this job announcement.**
For additional information:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf


In addition to meeting the basic education requirement, to qualify for this position applicants must ALSO meet the qualifications requirements listed below:

Basic Requirement to qualify for GS-05:No specialized experience needed. You must meet the basic education/experience requirements for all engineering positions listed in the Education Section of this announcement.

Minimum Qualifications for GS-07:
Specialized Experience:
One year of specialized experience which includes learning and assisting with hydraulic and/or hydrology engineering theories, concepts, and principles under the supervision of a lead engineer; resolving less complex problems associated with engineering projects, and assisting with various reports, spreadsheets, and graphs. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05).
OR
Education: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Civil Engineering.
OR
Superior Academic Achievement: In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on: (1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR (2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR (3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/).
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages.

Minimum Qualifications for GS-09:
Specialized Experience:
One year of specialized experience which includes learning and assisting hydraulic and/or hydrology engineering theories, concepts, and principles with review of a lead engineer; analyzing more complex problems associated with engineering projects and determining methods of resolution, assisting with observation during field visits to pertinent study areas, and assembling data for reports, spreadsheets, memorandums, and graphs. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07).
OR
Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates that knowledge , skills, and abilities necessary to do the work of the position, such as : Engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering.
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages.

Minimum Qualifications for GS-11:
Specialized Experience:
One year of specialized experience which includes performing hydraulic and hydrologic investigation studies, applying engineering theories, concepts, principles, standards more independently, analyzing complex problems associated with engineering projects and determining methods of resolution, performing field visits to pertinent study area(s) to observe conditions, and assembling data for flood plain information reports, flood insurance and flood protection plans. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).
OR
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Civil Engineering.
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

Minimum Qualifications for GS-12:
Specialized Experience:
One year of specialized experience which includes performing advanced hydraulic and hydrologic investigation studies, applying engineering theories, concepts, principles, standards independently, analyzing very complex problems associated with engineering projects and determining methods of resolution, performing field visits to pertinent study area(s) to observe conditions, developing sketches, plans, and designs to control erosion of flood control channels, and preparing applicable tabulations, graphs, and narrative reports. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-11).

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Education

In addition to meeting the qualification requirements listed above, you must also meet the basic education and/or experience for all Engineering positions listed below to qualify for this position:


Basic Education Requirement for Civil Engineer (Hydraulic) Series:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

NOTE: You must provide a copy of your transcript.

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • One year trial/probationary period may be required.
  • Direct Deposit of Pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a(n) Engineers and Scientists Career Field position
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.
  • Selections may be made at any grade levels.
  • This is a developmental position that may be filled at the GS-05, 07, GS-09, GS-11, or GS-12.
  • If selected at the GS-05, GS-07, GS-09, or GS-11 level, the target grade for this position is a GS-12.
  • Non-Competitive promotion to the GS-12 may be effected provided you are sufficiently experienced, meet all requirements, and are performing the full scope of major duties, and have obtained a Professional Engineering (PE) License.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

You will be evaluated based on how well you meet the qualifications listed in this vacancy announcement. Your qualifications will be evaluated based on your application materials (e.g., resume, supporting documents), the responses you provide on the application questionnaire, and the result of the online assessments required for this position. You will be assessed on the following competencies (knowledge, skills, abilities, and other characteristics):

  • Arithmetic/Mathematical Reasoning
  • Attention to Detail
  • Customer Service
  • Flexibility
  • Integrity/Honesty
  • Interpersonal Skills
  • Learning
  • Reading Comprehension
  • Self-Management
  • Stress Tolerance
  • Teamwork


The USA Hire Assessments includes a cut score based on the minimum level of required proficiency in these critical general competencies. You must meet or exceed the cut score to be considered. You will not be considered for the position if you score below the cut score or fail to complete the assessment.

Overstating your qualifications and/or experience in your application materials or application questionnaire may result in your removal from consideration. Cheating on the online assessment may also result in your removal from consideration.

Veterans and Military Spouses will be considered along with all other candidates.

U.S. Army Corps of Engineers

At the U.S. Army Corps of Engineers (USACE), we do not just construct infrastructure; we engineer the future of our Nation. From securing vital water resource infrastructure and restoring fragile ecosystems to designing world-class facilities for our armed forces and responding to natural disasters, our work touches lives every day.

By joining USACE, you will have the opportunity to contribute to high-impact, meaningful projects, collaborate with a diverse network of dedicated professionals, and advance your career. Here, your skills do not just build structures; they build national resilience, protect local communities, and support a safer, stronger tomorrow.

Build Strong With Us - explore our opportunities and engineer your legacy today.

Agency contact information

Army Applicant Help Desk
Website
https://portal.chra.army.mil/hr_public?id=app_inq
Address
RG-W2R905 US ARMY ENGINEER DISTRICT-ROCK ISLAND
DO NOT MAIL
Rock Island, IL 61204
US

Visit our careers page

Learn more about what it's like to work at U.S. Army Corps of Engineers, what the agency does, and about the types of careers this agency offers.

https://www.usace.army.mil/Careers/

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.