Skip to main content
U.S. flag
 

Civil Engineer (Structural)

Department of the Army
U.S. Army Corps of Engineers
Engineering & Construction Division, Design Branch

Summary

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service.

About the Position: At the full performance level, you will serve as a senior specialist, performs professional engineering work with the primary responsibility of planning, coordinating, preparing, and reviewing structural engineering design and technical specifications in support of agency projects.

Overview

Help
Accepting applications
Posted yesterday · Apply by 08/03/26
Due by 11:59 p.m. ET on August 3, 2026
Location
Work site options
Telework eligible
Yes—as determined by the agency policy.
Remote job
No
Relocation expenses reimbursed
No
Salary
$56,039 - $116,362 per year
Pay scale & grade
GS 7 - 12
Promotion potential
12 - May be selected at any grade level with non-competitive promotion potential to target grade. Non-competitive promotion potential to the target grade based on time-in-grade requirements and demonstrated ability to perform the higher graded duties.
Pay scale and grade determines the salary of the job.
Work schedule
Full-time
Travel Required
25% or less - You may be expected to travel for this position.
Appointment type
Permanent
Occupations and job series
Supervisory status
No
Federal service type
This job is in the Competitive Service
Represented by a union
No
Drug test
No
Security clearance
Not Required
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Jobs require a background check and some require a security clearance. The type depends on the job.
Background check type
Financial disclosure required
No
Some jobs require financial disclosure to identify conflicts of interests.
Announcement number
CEDC-26-13006692-DHA
Control number
877167400

This job is open to

Help

Clarification from the agency

All U.S. Citizens

Videos

Duties

Help
  • At the full performance level, you will
  • Provide technical direction, guidance and assistance to other employees assigned to assist in project or assignment completion.
  • Study design data and establish basic design criteria.
  • Coordinate with other organizational elements for additional or updated data and criteria needed for design purposes.
  • Develop structural engineering plans and sketches using CAD and BIM software.
  • Make field investigations at sites of proposed projects to observe actual conditions and obtain additional data for planning and design purposes.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • Business travel (TDY) may be required 25% of the time, particularly during Inspection of Completed Works (ICW) season.
  • This position is situational telework only, including emergency and OPM prescribed "unscheduled telework." This is NOT a remote telework position. The duty station is Memphis, TN.

Qualifications

This is a developmental position and me be filled at any grade level, GS-7, GS-9, GS-11, or GS-12. If selected at the GS-7, GS-9, or GS-11, the target level for this assignment is a GS-12. The grade level selected will be based on your qualifications and responses to the questionnaire. Assignments at the GS-7/9/11 will become progressively more difficult and will be under closer than normal supervision until the full performance level is reached. Non-Competitive promotion to the target job may be effected provided you are sufficiently experienced; meet all necessary qualification requirements for promotion to the target job; and is performing the full scope of the major duties.

Who May Apply: US Citizens

In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Please see Education section for Basic Education Requirement for Civil Engineers.

In addition to meeting the basic requirement, to qualify for this position you must also meet the qualification requirements listed below:

GS-07 Minimum Qualifications:

Specialized Experience: One year of specialized experience which includes collaborating in developing designs and construction plans using various engineering design software; AND preparing recurring reports relating to functions and activities of the unit. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05).

OR

Education: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Civil Engineering. (Note: You must attach a copy of your transcripts.)

OR

Superior Academic Achievement: In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on:(1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR(2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.; OR(3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/).(Note: You must attach a copy of your transcripts.)

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages.

GS-09 Minimum Qualifications:

Specialized Experience: One year of specialized experience which includes collaborating in developing designs and construction plans using various engineering design software; aiding in developing communication with other government agencies and local and private interests; AND preparing recurring reports relating to functions and activities of the unit. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07).

OR

Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: General Engineering; Mechanical Engineering; Civil Engineering; and Electrical Engineering. (Note: You must attach a copy of your transcripts.)

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages.

GS-11 Minimum Qualifications:

Specialized Experience:
One year of specialized experience, which includes some knowledge of mathematical, physical, and engineering sciences including assisting in the design of structures using established criteria or specifications; and helping senior level engineers to prepare technical structural engineering project design documents and submittals. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).

OR

Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as Civil Engineering.

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

GS-12 Minimum Qualifications:

Specialized Experience:
One year of specialized experience, which includes knowledge of mathematical, physical, and engineering sciences including assisting in the design of structures using established criteria or specifications; and preparing technical structural engineering project design documents and submittals. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-11).

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For the GS-12, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Basic Requirement for Civil Engineer:

Note: You must provide a copy of your transcript.


A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET);OR(2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics;(d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience:
College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Additional information

  • One or more of the following incentives may be authorized per management's discretion: Recruitment/relocation incentive; Advanced In-Hire Rate; and/or Advanced Leave Accrual.
  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • This position requires a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest.
  • Direct Deposit of Pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a Science, Engineering and Analysis Career Field position.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.

You may claim Priority Placement Program (PPP) preference.

DoD Priority Placement Program (PPP) Applicants will receive preference consideration at the full-performance grade level only.

Only PPP applicants currently occupying a formal training program position are entitled to exercise their priority status.

Veterans and Military Spouses will be considered along with all other candidates.

U.S. Army Corps of Engineers

At the U.S. Army Corps of Engineers (USACE), we do not just construct infrastructure; we engineer the future of our Nation. From securing vital water resource infrastructure and restoring fragile ecosystems to designing world-class facilities for our armed forces and responding to natural disasters, our work touches lives every day.

By joining USACE, you will have the opportunity to contribute to high-impact, meaningful projects, collaborate with a diverse network of dedicated professionals, and advance your career. Here, your skills do not just build structures; they build national resilience, protect local communities, and support a safer, stronger tomorrow.

Build Strong With Us - explore our opportunities and engineer your legacy today.

Agency contact information

Army Applicant Help Desk
Website
https://portal.chra.army.mil/hr_public?id=app_inq
Address
RG-W2R901 US ARMY ENGINEER DISTRICT-MEMPHIS
DO NOT MAIL
Memphis, TN 38103
US

Visit our careers page

Learn more about what it's like to work at U.S. Army Corps of Engineers, what the agency does, and about the types of careers this agency offers.

https://www.usace.army.mil/Careers/

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.