Skip to main content
U.S. flag
 

Mechanical Engineer

Department of the Army
Army Tank-Automotive and Armament Command (TACOM)
Directorate of Maintenance

Summary

About the Position: Sierra Army Depot is located in Herlong CA, a rural town in Northern California. Herlong is approximately 60 miles north of Reno, NV, and 35 miles south of Susanville, CA. The depot serves as an Army Expeditionary Logistical Support Center. Employees work Mon Thurs, 0630-1700 hrs. Youth Facilities and childcare available. Mass transportation is available at minimal cost. Surrounding area boasts a full range of outdoor sports and recreation activities.

Overview

Help
Accepting applications
Posted today · Apply by 08/03/26
Due by 11:59 p.m. ET on August 3, 2026
Location
1 vacancy in the following location:
Work site options
Telework eligible
No
Remote job
No
Relocation expenses reimbursed
No
Salary
$89,508 - $116,362 per year
Pay scale & grade
GS 12
Promotion potential
None
Pay scale and grade determines the salary of the job.
Work schedule
Full-time
Travel Required
Not required
Appointment type
Permanent
Occupations and job series
Supervisory status
No
Federal service type
This job is in the Competitive Service
Represented by a union
No
Drug test
No
Security clearance
Not Required
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Jobs require a background check and some require a security clearance. The type depends on the job.
Background check type
Financial disclosure required
No
Some jobs require financial disclosure to identify conflicts of interests.
Announcement number
MCGM-26-13007120-DHA
Control number
876891500

This job is open to

Help

Clarification from the agency

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Domestic Defense Industrial Base (DIB) & Major Range and Test Facilities Base (MRTFB) to recruit and appoint qualified candidates to positions in the competitive service. Category rating, veteran's preference, and traditional rating and ranking of applicants do NOT apply for this vacancy

Duties

Help
  • Performs complex engineering duties associated with the conception, design, redesign or modification of equipment, fixtures and/or tooling to support depot mission programs.
  • Demonstrates, trains, and releases equipment to operating shop personnel.
  • Participates with operating managers and staff personnel in the planning of short and long range goals.
  • Develops plans, procedures, and criteria for designs, equipment, and manufacturing processes.
  • Develops detailed economic analysis to support/justify the purchase of complex equipment.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • Appointment to this position is subject to a one year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 11. While probationary the incumbent can be terminated with limited appeal rights.
  • This position has a Temporary Duty (TDY) or business travel requirement of 10% of the time.
  • Must be able to obtain and maintain appropriate security clearance for access to Depot Production Computer System.

Qualifications

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Domestic Defense Industrial Base (DIB) & Major Range and Test Facilities Base (MRTFB) in DoD to recruit and appoint qualified candidates to positions in the competitive service. Category rating, veteran's preference, and traditional rating and ranking of applicants do NOT apply for this vacancy.

Who May Apply: US Citizens

In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement for All Professional Engineer positions:

A. Degree:
Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. (NOTE: You MUST attach a copy of your transcripts.)

OR

B.
Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Specialized Experience:
One year of specialized experience which include 1) Perform engineering calculations to verify design requirements for stress, pressure, flow, or tolerance conditions in mechanical systems. 2) Review technical data to evaluate component specifications and ensure compatibility with mechanical or production system requirements. 3) Executing mechanical engineering principles, concepts and practices in the design, installation, and inspection of complex mechanical test fixtures and systems used for the repair/overhaul of artillery and tracked combat vehicles. 4) Collecting engineering data to support analysis of component performance and validate preliminary design assumptions. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service GS-11.

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Only degrees from an accredited college or university recognized by the Department of Education are acceptable to meet positive education requirements. For additional information, please go to the Office of Personnel Management (OPM) and U.S. Department of Education websites at - http://www.opm.gov/qualifications and http://www.ed.gov/admins/finaid/accred/index.html

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • This position requires a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest.
  • Direct Deposit of Pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a(n) 16 - Engineers and Scientists (Non-Construction) Career Field position.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.

Veterans and Military Spouses will be considered along with all other candidates.

Army Tank-Automotive and Armament Command (TACOM)

Civilian employees serve a vital role in supporting the Army mission. They provide the skills that are not readily available in the military, but crucial to support military operations. The Army integrates the talents and skills of its military and civilian members to form a Total Army.

Agency contact information

Army Applicant Help Desk
Website
https://portal.chra.army.mil/hr_public?id=app_inq
Address
GM-W0MCAA US ARMY TACOM RED RIVER ARMY DEPOT
DO NOT MAIL
Texarkana, TX 75507
US

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.