Skip to main content
U.S. flag
 

Interdisciplinary

Department of the Army
U.S. Army Corps of Engineers
Engineering and Construction Division, Design Branch, General Engineering Section

Summary

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Positions of the DoD to recruit qualified candidates to positions in the competitive service.

About the Position: The Walla Walla District US Army Corps of Engineers helps manage local water resources for navigation, flood damage reduction, disaster assistance, hydroelectric power generation and other natural and heritage areas.

Overview

Help
Posted today · Apply by 07/24/26
Due by 11:59 p.m. ET on July 24, 2026
Location
1 vacancy in the following location:
Work site options
Telework eligible
Yes—as determined by the agency policy. Situational Telework Only.
Remote job
No
Relocation expenses reimbursed
Yes—You may qualify for reimbursement of relocation expenses in accordance with agency policy.
Salary
$74,678 - $127,443 per year
Pay scale & grade
GS 11 - 12
Promotion potential
12
Pay scale and grade determines the salary of the job.
Work schedule
Full-time
Travel Required
Occasional travel - You may be expected to travel for this position.
Appointment type
Permanent
Supervisory status
No
Federal service type
This job is in the Competitive Service
Represented by a union
Yes
Drug test
No
Security clearance
Not Required
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Jobs require a background check and some require a security clearance. The type depends on the job.
Background check type
Financial disclosure required
No
Some jobs require financial disclosure to identify conflicts of interests.
Announcement number
CEDE-26-12999944 202949 DHA
Control number
876013900

Videos

Duties

Help
  • Plan, coordinate, develop, and direct the review work of preparing contract specifications and review plans for both civil and military works projects.
  • Conduct research, investigation, and analysis to ensure specification provisions meet design criteria and technical requirements.
  • Prepare and review specifications for listings of required contractor submittals.
  • Participate in timely and thorough review of specifications.
  • Report and recommend changes and revisions to drawings and specifications.
  • Edit finished specifications draft for advertising.
  • Prepare amendments for invitation of bids.
  • Prepare or coordinate the preparation of change order.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • You must submit a copy of your transcripts with your application package or proof of alternative Basic Requirements listed in this announcement.
  • This position has a Temporary Duty (TDY) or business travel requirement of 15% of the time.
  • This position requires that the incumbent possess or obtain and maintain a valid state Driver's License in one of the 50 U.S. states or possessions to operate vehicles.

Qualifications

Who May Apply: US Citizens

In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement for General Engineer GS-0801, Civil Engineer GS-0810, Mechanical Engineer GS-0830, or Electrical Engineer GS-0850:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

GS-11 Specialized Experience: One year of specialized experience which includes experience in (1) applying engineering knowledge AND (2) using plans and specifications. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-09).

GS-12 Specialized Experience: One year of specialized experience which includes experience (1) applying engineering knowledge to civil works projects with an emphasis in developing technical plans and specifications AND (2) participating in technical reviews with other professionals. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For the GS-12, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-09 for the GS-11 and GS-11 for the GS-12).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • This position requires a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest.
  • Direct Deposit of Pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a Construction, Analysis, Science, Infrastructure, and Engineering Career Management DirectorateCareer Field position.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction.htm for more information.
  • Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.
  • Management may select at any of the grade levels announced.
  • Non-competitive promotion potential to the target grade.
  • Hiring incentives such as a recruitment/relocation bonus, service credit for leave, and student loan repayment may be authorized (subject to available budget).
  • Series eligible for Special Salary Rate (SSR) 0755, 0810/0830/0850.
  • This position is covered under the International Federation of Professional and Technical Engineers (IFPTE) Bargaining Unit.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.

Veterans and Military Spouses will be considered along with all other candidates.

U.S. Army Corps of Engineers

At the U.S. Army Corps of Engineers (USACE), we do not just construct infrastructure; we engineer the future of our Nation. From securing vital water resource infrastructure and restoring fragile ecosystems to designing world-class facilities for our armed forces and responding to natural disasters, our work touches lives every day.

By joining USACE, you will have the opportunity to contribute to high-impact, meaningful projects, collaborate with a diverse network of dedicated professionals, and advance your career. Here, your skills do not just build structures; they build national resilience, protect local communities, and support a safer, stronger tomorrow.
Build Strong With Us - explore our opportunities and engineer your legacy today.

Agency contact information

Army Applicant Help Desk
Website
https://portal.chra.army.mil/hr_public?id=app_inq
Address
RH-W2SJ03 US ARMY ENGINEER DISTRICT-WALLA WALLA
DO NOT MAIL
Walla Walla, WA 99362
US

Visit our careers page

Learn more about what it's like to work at U.S. Army Corps of Engineers, what the agency does, and about the types of careers this agency offers.

https://www.usace.army.mil/Careers/

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.