This position is located in the National Transportation Safety Board (NTSB), Office of Aviation Safety (OAS) in Washington, D.C. Participates, investigates, and directs engineering aspects of aircraft flight controls, avionics, electrical, hydraulic, and pneumatic systems.
This position is located in the National Transportation Safety Board (NTSB), Office of Aviation Safety (OAS) in Washington, D.C. Participates, investigates, and directs engineering aspects of aircraft flight controls, avionics, electrical, hydraulic, and pneumatic systems.
Newly appointed federal government employees, starting salary rate may be set at the step 1 of the GS-14.
Applications will be accepted from any U.S. Citizen. Direct-Hire Authority will be used to fill this position. Veteran's preference and category rating of applicants does not apply to this vacancy. This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Direct Hire Authority for Shortage Category/Critical need positions to recruit and appoint qualified candidates to positions in the competitive service.
As a Aerospace Engineer (Systems) - Direct Hire, GS-0861-14, you will perform the following major duties:
Physical Demands: Occasionally the aircraft wreckage may contain hazardous materials that may be burning by the time the investigator arrives on-the-scene. The incumbent may be exposed to a variety of weather conditions and other environmental discomforts such as remote, rugged, snow, rain, temperature extremes, swampy or mountainous areas and hostile settings. Investigators may have to wear a hardhat, safety shoes, goggles, gloves, and other protective equipment.
Work Environment: The incumbent supports major go-team launches as well as significant international investigations. Major go-team launch teams commonly travel on the Federal Aviation Administration (FAA) jet from Reagan National Airport within two hours after an accident notification is received. Timely arrival at the scene of a major accident allows for timely documentation of a wreckage; a delay in this effort can have significant impacts, such as impeding the re-opening of an airport. International travel by US Government employees frequently requires the issuance of a visa from the host country, which is most efficiently obtained at the embassies located in Washington, DC. Additionally, security concerns in many locations make it essential that the investigative team travel together.
To qualify for this position, you must meet both the Educational Requirements and the Specialized Experience as described below.
You must possess one year of specialized experience equivalent to the GS-13 in the federal service. Specialized experience is defined as: Applying engineering concepts and principles to analyze and evaluate aircraft systems and components (e.g. aircraft flight controls, avionics, electrical, hydraulic, and pneumatic systems). Participating in test plans and procedures for post-accident examinations and troubleshooting procedures for aircraft systems. Identifying issues and proposing safety recommendations related to aviation safety. Writing analytical comprehensive reports and exchanging information concerning aviation safety with other stakeholders such as other federal agencies, industry, labor, manufacturers, national and professional organizations/associations.
For more information see link: Aerospace Engineering Series 0861 (opm.gov)
NOTE: IN DESCRIBING YOUR EXPERIENCE, PLEASE BE CLEAR AND SPECIFIC. WE WILL NOT MAKE ASSUMPTIONS REGARDING YOUR EXPERIENCE. Your resume must clearly show the specialized experience and competencies related to this position. Failure to demonstrate how you possess the education, specialized experience and/or competencies will result in an "Ineligible" rating.
EDUCATION: A. 4-year course of study leading to a bachelor's degree in professional engineering. To be acceptable, the curriculum must: (1) be in a school of engineering with at least one curriculum accredited by the Accreditation Board for Engineering and Technology (ABET) as a professional engineering curriculum; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength materials (stress-strain relationships);(c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science and physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A above.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
You MUST provide either official or unofficial transcripts or other documentation to support your educational claims. All materials must be submitted by the closing date of the announcement.
GENERAL EDUCATION: All academic degrees and coursework must be completed at an institution that has obtained accreditation or pre-accreditation status from an accrediting body recognized by the U.S. Department of Education for it to be credited towards qualifications. For a list of schools that meet these criteria, see https://www.ed.gov/accreditation?src=rn. Applications submitted without the required supporting documents will not be accepted. An unofficial transcript; statement from the institution's registrar, dean, or other appropriate official; or equivalent documentation is acceptable at the time of application. Education submitted must be appropriately accredited by an accredited body recognized by the Secretary of the U.S. Department of Education. For additional information, refer to the U.S. Department of Education web site at: http://www.ed.gov
FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://www2.ed.gov/about/offices/list/ous/international/usnei/us/edlite-visitus-forrecog.html
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
You will be evaluated for this job based on how well you meet the qualifications above.
You will be evaluated for this job based on how well you meet the qualifications above.
This position will be filled through the Direct Hire Authority. Under this authority, competitive rating, ranking, and veterans' preference procedures do not apply. Your application will be considered based on education, training, and quality of your experience. For more information on Direct-Hire Authority visit: https://www.opm.gov/policy-data-oversight/hiring-information/direct-hire-authority/
You will be assessed on the following competencies (knowledge, skills, abilities, and other characteristics):
The USA Hire Assessments includes a cut score based on the minimum level of required proficiency in these critical general competencies. You must meet or exceed the cut score to be considered. You will not be considered for the position if you score below the cut score or fail to complete the assessment.
You will be evaluated based on how well you meet the qualifications listed in this vacancy announcement. Your qualifications will be evaluated based on your application materials (e.g., two-page resume, supporting documents), your responses on the application questionnaire, and your responses to all assessments required for this position.
Overstating your qualifications and/or experience in your application materials or application questionnaire may result in your removal from consideration. Cheating on an assessment may also result in your removal from consideration.
Do NOT include the following types of information in your resume/application. If any are included, you will be deemed INELIGIBLE for consideration.
The following documents are required for a COMPLETE APPLICATION PACKAGE:
Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education.
Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
Please read the entire announcement and all the instructions before you begin an application. To apply and be considered for this position, you must complete all required questionnaires, assessments and submit all required documentation as specified in the How to Apply and Required Documents section. The complete application package must be submitted by 11:59 PM (ET) on the closing date of the announcement to receive consideration. The application process is as follows:
To update your application, including supporting documentation: During the announcement open period, return to your USAJOBS account, find your application record, and click Edit my application. This option will no longer be available once the announcement has closed.
To view the announcement status or your application status: Visit https://www.usajobs.gov/Help/howto/application/status/. Your application status page is where you can view your application status, USA Hire assessment completion status, and review your notifications sent by the hiring agency regarding your application.
NOTE: If you have any additional questions, comments or concerns prior to the closing date please send those emails to include the vacancy announcement number, position title and your reason for contacting us to recruitment@ntsb.gov at least 1 business day before the closing date.Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed in the announcement. After the evaluation is complete, you will receive another notification regarding the status of your application.
The Federal hiring process is set up to be fair and transparent. Please read the following guidance.
