Skip to main content
U.S. flag
Back to results
 

General Engineer

Department of the Army
Army Tank-Automotive and Armament Command (TACOM)
DIRECTORATE FOR MAINTENANCE

Summary

About the Position: Red River Army Depot (RRAD) is located in northeast Texas, 19 miles west of Texarkana and approximately 170 miles northeast of Dallas. RRAD is near the corners of 4 states - Arkansas, Louisiana, Oklahoma and Texas. The depot's enormous maintenance mission includes the repair, rebuild, overhaul and conversion of tactical wheeled vehicles. For more information on Red River Army Depot, go to the following web site: http://www.redriver.army.mil/.

Overview

Help
Accepting applications
Posted yesterday · Apply by 06/05/26
Due by 11:59 p.m. ET on June 5, 2026
Location
Work site options
Telework eligible
No
Remote job
No
Relocation expenses reimbursed
No
Salary
$89,508 - $116,362 per year
Pay scale & grade
GS 12
Pay scale and grade determines the salary of the job.
Work schedule
Full-time
Travel Required
Occasional travel - You may be expected to travel for this position.
Appointment type
Temporary promotion - 1 Year
Occupations and job series
Supervisory status
No
Federal service type
This job is in the Competitive Service
Represented by a union
No
Drug test
No
Security clearance
Not Required
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Jobs require a background check and some require a security clearance. The type depends on the job.
Background check type
Financial disclosure required
Yes
Some jobs require financial disclosure to identify conflicts of interests.
Announcement number
MCGM-26-12966054-MP
Control number
870194500

Duties

Help
  • Serves as representative and engineering consultant to Major Subordinate Commands (MSCs)/Program Management Officers (PMOs) in engineering conferences, providing engineering advice on design/redesign, specifications, test parameters, etc.
  • Prepares formal and informal reports and recommendations to MSC's/PMO's advising of current/projected program status, potential problems, and recommended solutions in order to establish depot-level maintenance capabilities.
  • Provides professional engineering advice and assistance in planning and conducting pre-production conferences prior to initiation of start-to-work.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • Appointment to this position is subject to a one year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 11. While probationary the incumbent can be terminated with limited appeal rights.
  • Position may be converted to permanent without further competition.
  • Temporary promotion may be made permanent or extended up to a maximum of five years.
  • Time Limited Detail NTE may be made permanent or extended at management discretion.
  • Temporary appointments may be extended in one year increments up to a maximum of three years.
  • This position has a Temporary Duty (TDY) or business travel requirement of 10% of the time.
  • This position requires pre-employment financial disclosure and annually thereafter in accordance with DoD Directive 5500-7-R.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.


  • Current Department of Army Civilian Employees
  • Interagency Career Transition Assistance Plan
  • Military Spouses, under Executive Order (E.O.) 13473
  • Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible


In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement for All Professional Engineer positions:

A. Degree:
Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. (NOTE: You MUST attach a copy of your transcripts.)

OR


B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Specialized Experience:
One year of specialized experience which include 1) Preparing budget estimates for project funding and bid evaluations to support acquisition decisions and ensure accurate resource planning. 2) Planning and directing the engineering design, development, and modification of vehicles and components. 3) Advises production teams during pre-production and overhaul activities to resolve and prevent engineering issues. 4) Reviews technical data to ensure completeness and prepares or evaluates updated technical data packages. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).


Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.


Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Only degrees from an accredited college or university recognized by the Department of Education are acceptable to meet positive education requirements. For additional information, please go to the Office of Personnel Management (OPM) and U.S. Department of Education websites at - http://www.opm.gov/qualifications and http://www.ed.gov/admins/finaid/accred/index.html

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • This position requires a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest.
  • Direct deposit of pay is required.
  • This position requires you to submit a Public Financial Disclosure Report (OGE 278) or a Confidential Financial Disclosure Report (OGE450) upon entry, and annually thereafter.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a(n) 16 - Engineers and Scientists (Non-Construction) Career Field position.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.
Reasonable Accommodation (RA) Requests: If you believe you have a disability (i.e., physical or mental), covered by the Rehabilitation Act of 1973 as amended that would interfere with completing the USA Hire Competency Based Assessments, you will be granted the opportunity to request a RA in your online application. Requests for RA for the USA Hire Competency Based Assessments and appropriate supporting documentation for RA must be received prior to starting the USA Hire Competency Based Assessments. Decisions on requests for RA are made on a case-by-case basis. If you meet the minimum qualifications of the position, after notification of the adjudication of your request, you will receive an email invitation to complete the USA Hire Competency Based Assessments, based on your adjudication decision. You must complete all assessments within 48 hours of receiving the URL to access the USA Hire Competency Based Assessments if you received the link after the close of the announcement. To determine if you need a RA, please review the Procedures for Requesting a Reasonable Accommodation for Online Assessments here: https://appsupport.usastaffing.gov/hc/en-us/sections/28980686389652-Reasonable-Accommodation-Information

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

You will be evaluated based on how well you meet the qualifications listed in this vacancy announcement. Your qualifications will be evaluated based on your application materials (e.g., resume, supporting documents), the responses you provide on the application questionnaire, and the result of the online assessments required for this position. You will be assessed on the following competencies (knowledge, skills, abilities, and other characteristics):

  • Attention to Detail
  • Customer Service
  • Decision Making
  • Flexibility
  • Influencing/Negotiating
  • Integrity/Honesty
  • Interpersonal Skills
  • Learning
  • Reading Comprehension
  • Reasoning
  • Self-Management
  • Stress Tolerance
  • Teamwork


The USA Hire Assessments includes a cut score based on the minimum level of required proficiency in these critical general competencies. You must meet or exceed the cut score to be considered. You will not be considered for the position if you score below the cut score or fail to complete the assessment.

Overstating your qualifications and/or experience in your application materials or application questionnaire may result in your removal from consideration. Cheating on the online assessment may also result in your removal from consideration.

You may claim Military Spouse preference.

Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.

Army Tank-Automotive and Armament Command (TACOM)

Civilian employees serve a vital role in supporting the Army mission. They provide the skills that are not readily available in the military, but crucial to support military operations. The Army integrates the talents and skills of its military and civilian members to form a Total Army.

Agency contact information

Army Applicant Help Desk
Website
https://portal.chra.army.mil/hr_public?id=app_inq
Address
GM-W0MCAA US ARMY TACOM RED RIVER ARMY DEPOT
DO NOT MAIL
Texarkana, TX 75507
US

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.