Skip to main content
U.S. flag
Back to results
 

Engineering Technician

Department of the Army
Army Tank-Automotive and Armament Command (TACOM)
Directorate for Maintenance

Summary

About the Position: Red River Army Depot (RRAD) is located in northeast Texas, 19 miles west of Texarkana and approximately 170 miles northeast of Dallas. RRAD is near the corners of 4 states - Arkansas, Louisiana, Oklahoma and Texas. The depot's enormous maintenance mission includes the repair, rebuild, overhaul and conversion of tactical wheeled vehicles. For more information on Red River Army Depot, go to the following web site: www.redriver.army.mil.

Overview

Help
Accepting applications
Open & closing dates
05/06/2026 to 05/18/2026
Salary
$74,678 - $97,087 per year
Pay scale & grade
GS 11
Location
1 vacancy in the following location:
Texarkana, TX
Remote job
No
Telework eligible
No
Travel Required
Occasional travel - You may be expected to travel for this position.
Relocation expenses reimbursed
No
Appointment type
Temporary promotion - 1 year
Work schedule
Full-time
Service
Competitive
Promotion potential
None
Job family (Series)
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Financial disclosure
No
Bargaining unit status
No
Announcement number
MCGM-2612953517-MP
Control number
868073600

Duties

Help
  • Develops and prepares computer programs for three-dimensional contouring requiring simultaneous motion of three to six axes of machine tool motion by a variety of numerically controlled/computer numerically controlled (NC/CNC) equipment.
  • Develops sequence of machining operations required to produce the item utilizing the Computerized Interactive Graphics System or comparable software.
  • Prepares programming manuscript to include spindle speed and direction of rotation, automatic tool changes selection code, tool change code, coolant flow, direction and degree of table rotation, interlock bypasses, absolute positioning data,
  • cutting feeds, machine control unit routine setup data, programmed and optional stops, contouring feed rate number, spindle key lock orientation, and related
  • detail command required for such machining processes as milling, drilling, tapping, boring and reaming, etc.
  • Designs or participates in the design and layout of the necessary fixtures and special tooling for the NC/CNC equipment configuration, capabilities and capacities
  • as required to establish compatible dimensions and machining techniques for each programmed job.
  • Provides Engineering Draftsman or counterpart with basic measurement detail by preparing initial sketch and/or annotations on conventional drawings.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • Must be able to obtain and maintain appropriate security clearance for access to Depot Production Computer System.
  • This position has a Temporary Duty (TDY) or business travel requirement of 10% of the time.
  • Appointment to this position is subject to a one year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 11. While probationary the incumbent can be terminated with limited appeal rights.
  • Position may be converted to permanent without further competition.
  • Temporary promotion may be made permanent or extended up to a maximum of five years.
  • Time Limited Detail NTE may be made permanent or extended at management discretion.
  • Temporary appointments may be extended in one year increments up to a maximum of three years.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.

  • Current Department of Army Civilian Employees
  • Interagency Career Transition Assistance Plan
  • Military Spouses, under Executive Order (E.O.) 13473
  • Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible


In order to qualify, you must meet the experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience.

Specialized Experience: One year of specialized experience which includes 1) Operating numerically controlled/computer numerically controlled (NC/CNC) equipment for manufacturing special tools; 2) Utilizing mathematics calculation (e.g. algebra, geometry and trigonometric formulas) for machine operations; and 3) Analyzing data from a variety of sources such as engineering designs, blueprints, sample parts, etc. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-09).

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone -- no substitution of education for experience is permitted.

You will be evaluated on the basis of your level of competency in the following areas:

  • Attention to Detail
  • Customer Service
  • Flexibility
  • Integrity/Honesty
  • Interpersonal Skills
  • Learning
  • Reading Comprehension
  • Reasoning
  • Self-Management
  • Stress Tolerance
  • Teamwork


Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-09).

Education

This job does not have an education qualification requirement.

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • This position requires a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest.
  • Direct deposit of pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a(n) Materiel Maintenance Management Career Field position.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.

You may claim Military Spouse preference.

Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.

Army Tank-Automotive and Armament Command (TACOM)

Civilian employees serve a vital role in supporting the Army mission. They provide the skills that are not readily available in the military, but crucial to support military operations. The Army integrates the talents and skills of its military and civilian members to form a Total Army.

Agency contact information

Army Applicant Help Desk
Website
https://portal.chra.army.mil/hr_public?id=app_inq
Address
GM-W0MCAA US ARMY TACOM RED RIVER ARMY DEPOT
DO NOT MAIL
Texarkana, TX 75507
US

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.