Skip to main content
U.S. flag
Back to results
 

Civil Engineer (Geotechnical)

Department of the Army
U.S. Army Corps of Engineers
ENGINEERING DIVISION, GEOTECH AND MATERIALS SECTION

Summary

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service.

About the Position: Oversees planning and execution of projects in arctic and sub-arctic regions. Provides expert guidance on soil, foundations, and construction materials, advises agencies, and represents the District Engineer. Leads staff when needed, and ensures compliance.

Overview

Help
Accepting applications
Open & closing dates
05/04/2026 to 05/18/2026
Salary
$69,988 - $134,120 per year

In addition to the salary, a cost of living allowance (COLA) of 1.49% is currently authorized and is subject to change.

Pay scale & grade
GS 7 - 12
Location
1 vacancy in the following location:
Elmendorf AFB, AK
Remote job
No
Telework eligible
Yes—• Eligible for Situational Telework only, including Emergency and OPM prescribed "unscheduled telework".
Travel Required
Occasional travel - You may be expected to travel for this position.
Relocation expenses reimbursed
Yes—Payment of Permanent Change of Station (PCS) costs may be authorized, subject to the provisions of the Joint Travel Regulations.
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
12
Job family (Series)
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Financial disclosure
Yes
Bargaining unit status
No
Announcement number
CEDD-26-12950328-DHA
Control number
867423100

Videos

Duties

Help
  • Plan and carry out soil and foundation studies, analyze results, and provide designs and reports for military and civil construction projects.
  • Review and approve geotechnical studies and designs from contractors and in-house staff to ensure safe and effective project solutions.
  • Support construction by inspecting sites, evaluating soil conditions, advising field staff, and recommending corrections as needed.
  • Manage and oversee geotechnical contracts, including defining work, coordinating with contractors, and ensuring project requirements are met.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • Financial Disclosure Statement OGE Form 450 is used to assist agencies and employees to avoid conflicts between duties and financial interest.
  • he duties of this position require the incumbent to possess or obtain and maintain a valid state Driver's License
  • This position has a Temporary Duty (TDY) or business travel requirement of 25% of the time.

Qualifications

Who May Apply: US Citizens

In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement: This position has a basic entry requirement. The entry requirement requires completion of education or a combination of education and experience sufficient to be comparable to that normally acquired through the completion of a four year course of study with a major in the professional or scientific field.

Basic Requirement for Civil Engineer (Geotechnical):

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Specialized Experience GS-7:
One year of specialized experience which includes assisting in the collection of project data and preparing engineering documentation. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-05).

OR

Education: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as professional engineering or scientific fields.

OR

Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on:(1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses; OR (2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum; OR (3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achsnatl.org/).

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages.

Specialized Experience GS-9: One year of specialized experience which includes assisting in the conduct of geotechnical investigations and related engineering support during design. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07).

OR

Education: Master's or equivalent graduate degree or 2 full years of progressively higher-level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as professional engineering or scientific fields.

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages.

Education

Qualifications Continued
Specialized Experience GS-11: One year of specialized experience which includes assisting in the conduct of geotechnical investigations, designs, and related engineering support during construction. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).

OR

Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher-level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as professional engineering or scientific fields..

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

GS-12 Specialized Experience: One year of specialized experience which includes conducting geotechnical investigations, designs, and related engineering support during construction. This definition of specialized experience is typical of work performed at the next lower grade/level position in the Federal service (GS-11).

Some federal jobs allow you to substitute your education for the required specialized experience in order to qualify. For this job at the GS-12 level, you must meet the qualification requirement using specialized experience alone--no substitution of education for experience is permitted.

This position has selective placement factor to qualify for the GS-12 grade level which must be met prior to employment and for continued employment.

Selective Placement Factor for GS-12: This position requires a current, active, valid and unrestricted license as a Professional Engineer (PE) in a state, the District of Columbia, or a territory of the United States.


FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • This position requires a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest.
  • Direct Deposit of Pay is required.
  • This position requires you to submit a Public Financial Disclosure Report (OGE 278) or a Confidential Financial Disclosure Report (OGE450) upon entry, and annually thereafter.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a(n) 18 Career Field position.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction.htm for more information.
  • Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.
  • Relocation or recruitment incentive may be authorized for eligible candidates based on funding availability.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.

Veterans and Military Spouses will be considered along with all other candidates.

U.S. Army Corps of Engineers

Looking for a great place to work? The U.S. Army Corps of Engineers (USACE) is one of the best! In 2020, USACE ranked #2 of government large-agency subcomponent! USACE is one of the world's premier public engineering, design, and construction management agencies. We serve the American people, striving to provide the most effective engineering and environmental science solutions to the nation's complex problems affecting national security, the economy and the environment in which we live.

USACE offers a team-inspiring and collaborative work environment; providing challenging and rewarding careers across a variety of disciplines. We rely on leaders with vision, creativity, and programmatic and technical expertise to lead us into the future. Align your talents with your passion and find out why the U. S. Army Corps of Engineers is a great place to work!

Agency contact information

Army Applicant Help Desk
Website
https://portal.chra.army.mil/hr_public?id=app_inq
Address
RM-W2SN04 US ARMY ENGINEER DISTRICT-ALASKA
DO NOT MAIL
Anchorage, AK 99506
US

Visit our careers page

Learn more about what it's like to work at U.S. Army Corps of Engineers, what the agency does, and about the types of careers this agency offers.

https://www.usace.army.mil/Careers/

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.