Skip to main content
U.S. flag
Back to results
 

Civil Engineer

Department of the Army
United States Army Installation Management Command
USAG Ft Leavenworth, Directorate of Public Works, Engineering Division

Summary

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Competitive positions to recruit and appoint qualified candidates to positions in the competitive service.

About the Position: Plan and/or design substantial new construction, renovation and improvement projects for a variety of real property facilities. This is a developmental position and may be filled at the GS-11 or GS-12 level. Full performance level is GS 12.

Overview

Help
Open & closing dates
04/28/2026 to 05/05/2026
Salary
$75,897 - $118,261 per year
Pay scale & grade
GS 11 - 12
Location
1 vacancy in the following location:
Fort Leavenworth, KS
Remote job
No
Telework eligible
No
Travel Required
Occasional travel - You may be expected to travel for this position.
Relocation expenses reimbursed
No
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
12
Job family (Series)
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Financial disclosure
No
Bargaining unit status
No
Announcement number
MCFS-2612945646-DHA
Control number
866873400

Duties

Help
  • As a Civil Engineer, you will perform the following duties which is not an all-inclusive list:
  • Serve as an Engineer within a highly collaborative design team, make immediate contributions and take initiative to complete work on some very unique historically significant facilities on Fort Leavenworth.
  • Engage in planning and/or designing substantial new construction, renovation and improvement projects for a variety of real property facilities.
  • Evaluate programs and development plans for construction, renovation and improvements of real property facilities.
  • Responsible for the preparation and/or review of engineering designs, plans (using CADD software), technical scopes of work, specifications, cost estimates, etc.
  • Prepare costs estimates, project time schedules and economic analyses to determine feasibility of renovations versus new construction.
  • Evaluate programs and projects to assure compliance with all environmental, energy use, safety and security standards.
  • Prepare civil engineering calculations for structural load capacities, drainage flows and water flows.
  • Design plain and reinforced concrete for all types of construction and designs economical steel, timber and masonry reinforcements.
  • Coordinate structural designs of proposed changes or specifications of buildings and structures with other staff engineers of the Division.
  • Develop, study and recommend operational guidelines to better utilize existing and available facilities, manpower and materials.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.

Qualifications

Who May Apply: US Citizens

In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement for Civil Engineer:

Degree: Engineering. To be acceptable, the program must: (1) lead to a degree in a school of engineering with at least one program accredited by ABET; or (2)include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c)fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f)nature and properties of materials (relating particle and aggregate structure to properties);and (g) any other comparable area of fundamental engineering science or physics, such asoptics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.

3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.

4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, maybe accepted in lieu of a in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g.,in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Specialized Experience required GS 11 level: One year of specialized experience which includes experience assisting with a wide range of engineering concepts, standards, and methods to determine actions for construction projects, plans, drawings, designs, specifications and cost estimates; experience managing construction projects from design through completion of construction. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-09).

Specialized Experience required GS 12 level: One year of specialized experience which includes experience performing a wide range of engineering concepts, standards, and methods to determine actions for construction projects, plans, drawings, designs, specifications and cost estimates; experience managing construction projects from design through completion of construction, and experience interpreting engineering standards or criteria in analyzing and recommending solutions to problems. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).

To qualify at the GS-11 Level:
Specialized Experience: One year of specialized experience which includes preparing civil designs for roads, site plans, drainage, utilities, structural fixtures, bridges, dams, etc. for new construction; reviewing plans and specifications from civilian architect-engineering firms for compliance with building codes; and analyzing structural members in order to estimate maximum allowable loads. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-09 or above).

OR

Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: engineering.

OR

Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

To qualify at the GS-12 Level:
Specialized Experience: One year of specialized experience which includes performing site surveys to obtain data to incorporate into code compliant designs; designing construction plans for a multiple input and outlet drainage system(s) over a large area of the installation; and conducting structural inspections in order to perform maintenance for repairs as needed. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11 or above).

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

This is a developmental position and may be filled either the GS 11 or GS 12 grade level. Full performance is the GS 12 level. The incumbent may be non-competitively promoted pending time-in-grade requirements and demonstrated ability to perform the next level/grade duties.


Education

Education Substitution Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you may qualify if your education meets the definitions below:

GS 11 level - 3 years of progressively higher level graduate education leading to a Ph.D. degree or Ph.D. or equivalent doctoral degree in a related course of study.

GS 12 level - You must meet the qualification requirement using experience alone -no substitution of education for experience is permitted.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • This position requires a 1 year probationary period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service. Continued employment requires written certification that it advances the public interest.
  • Direct Deposit of Pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a(n) Engineers & Scientists (Construction)Career Field position.
  • Salary includes applicable locality pay or Local Market Supplement.
  • Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.
  • Recruitment and relocation incentives MAY be authorized.
  • Student loan repayment MAY be authorized.
  • Salary negotiations for candidates new to Federal service MAY be authorized.
  • Credit for prior non-Federal experience and certain military service for leave accrual rates MAY be authorized.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.

Veterans and Military Spouses will be considered along with all other candidates.

United States Army Installation Management Command

Civilian employees serve a vital role in supporting the Army mission. They provide the skills that are not readily available in the military, but crucial to support military operations. The Army integrates the talents and skills of its military and civilian members to form a Total Army.

About the Surrounding Area: Fort Leavenworth is located in the Greater Kansas City metropolitan area. The immediate area is considered a national treasure with historic sites and homes filled with small-town charm and friendliness merged with Kansas City retail, attractions and entertainment. Kansas City, well known for its BBQ, Jazz and fountains, is rich in culture with a thriving performing arts scene. Honored as one of the World's 15 Most Beautiful Concert Halls, the Kauffman Center attracts some of the world's most renowned performers and entertainers. For the sports enthusiasts, Kansas City hosts professional sports with the Royals, Chiefs, Sporting Kansas City and Kansas City Current soccer clubs. An international airport is conveniently located within a 30 minute drive of Fort Leavenworth. More information may be found at www.visitkc.com or https://garrison.leavenworth.army.mil/.

Agency contact information

Army Applicant Help Desk
Email
USARMY.APG.CHRA-NE.MBX.APPLICANTHELP@ARMY.MIL
Website
https://portal.chra.army.mil/hr_public?id=app_inq
Address
FS-W6B7AA US ARMY IMCOM-USAG FT LEAVENWORTH
DO NOT MAIL
Fort Leavenworth, KS 66027
US

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.