Skip to main content
U.S. flag
Back to results
 

MECHANICAL ENGINEER

Department of the Army
United States Army Installation Management Command
US Army Garrison Benelux DPW, Chievres, Belgium

Summary

About the Position:
This position is located in Chievres, Belgium. The surrounding area is rural with other cities within 10-30 minutes drive. The base is in central Belgium with the Netherlands, France and Germany within a few hours drive. The United Kingdom is also accessible via ferry or the channel. The base is small but offers most amenities provided by larger installations. The average weather is mild with little extremes of hot and cold seasonal conditions.

Overview

Help
Accepting applications
Open & closing dates
04/20/2026 to 05/04/2026
Salary
$79,012 - $101,953 per year
Pay scale & grade
GS 12
Location
1 vacancy in the following location:
Chievres, Belgium
Remote job
No
Telework eligible
No
Travel Required
25% or less - You may be expected to travel for this position for 20% of the time.
Relocation expenses reimbursed
Yes—You may qualify for reimbursement of relocation expenses in accordance with agency policy.
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
None
Job family (Series)
Supervisory status
No
Security clearance
Secret
Drug test
No
Position sensitivity and risk
Noncritical-Sensitive (NCS)/Moderate Risk
Trust determination process
Financial disclosure
No
Bargaining unit status
No
Announcement number
EUJU-26-12935045-MP
Control number
865606500

Duties

Help
  • Apply professional knowledge of mechanical design principles and techniques in developing designs and preparation of design analyses, plans and specifications to analyze, evaluate, design and provide expert advice on mechanical systems for buildings.
  • Serve as Engineering Project Manager and technical authority identifying risks, problem areas, and mitigation strategies.; Coordinates, integrates, leads and directly controls efforts associated with assigned projects.
  • Coordinates, integrates, leads and directly controls efforts associated with assigned projects.
  • Apply applicable engineering principles, regulations, policies, and procedures.
  • Prepares complex projects lacking sufficient design criteria or where established design criteria and precedents are inconsistent with project objectives, or require innovative and unique approaches
  • Provides technical guidance to other engineers and engineering technicians in the development of complete construction projects.
  • Develop solutions for issues related to planning and design.
  • Entails design problems requiring intense research and study of numerous mechanical aspects encompassing interrelated design disciplines, some of which are conflicting and difficult to reconcile. Some guide specifications or criteria may be ...
  • ...lacking, incomplete or not applicable, requiring employee to adapt guide specifications and criteria or design of features to meet local needs.
  • Work professionally and effectively with Garrison staff, higher HQ, U.S. Army Corps of Engineers, host nation, contractors, and tenant organizations.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • Applicants must comply with the Exceptional Family Member Program requirements as outlined in the DoD Instruction 1315.19.
  • Must be able to satisfy the requirements of the 26JUL12 DODI 1400.25 V1230, DoD Civilian Personnel Management System: Employment in Foreign Areas and Employee Return Rights. Visit https://www.esd.whs.mil/DD/DoD-Issuances/140025/.
  • Direct deposit of pay is required.
  • U.S. citizens overseas under ordinarily resident status are not eligible for appointment under the Status of Forces Agreement.
  • One year probationary period or two year trial period may be required.
  • This position requires the incumbent to obtain an interim Secret clearance and obtain/maintain a Secret security clearance based on the duties and responsibilities identified.
  • This position has a Temporary Duty (TDY) of business travel requirement up to 20% of the time.
  • This position requires a 1 year probationary period or two year trial period during which the agency evaluates your fitness and whether your continued employment advances the public interest. In making this determination, ...
  • the agency may consider your performance and conduct; agency needs and interests; whether your continued employment supports organizational or Government goals; and whether it promotes the efficiency of the Federal service...
  • Continued employment requires written certification that it advances the public interest.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.

  • 30 Percent or More Disabled Veterans
  • Current Department of Army Civilian Employees Applying to OCONUS Positions
  • Current Department of Defense (DOD) Civilian Employee (non-Army)
  • Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel Workforce
  • Excepted Service Overseas Family Member Appointment
  • Family Member Preference (FMP) for Overseas Employment
  • Interagency Career Transition Assistance Plan
  • Land Management Workforce Flexibility Act
  • Military Spouse Preference (MSP) for Overseas Employment
  • Non-Department of Defense (DoD) Transfer
  • Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible
  • Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement
  • Priority Placement Program, DoD Retained Grade Preference Eligible
  • Reinstatement
  • Veterans Employment Opportunity Act (VEOA) of 1998



In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement for Mechanical Engineer

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must:
(1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR
(2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics; (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating to particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering acquired under professional engineering supervision and guidance. Ordinarily there would be an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

IN ADDITION TO MEETING THE BASIC REQUIREMENT, to qualify for this position you must also meet the specialized experience described below.

Specialized Experience: One year of specialized experience which includes
(1) developing designs and preparation of design analyses, plans and specifications to analyze, evaluate, design and provide expert advice on mechanical systems for buildings and site utility systems throughout the installations;
(2) performing complex technical calculations and identifying the most economical and efficient procedures for project design and performance; AND
(3)and develops solutions for issues related to planning and design.
This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).


Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11)

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Additional information

  • Locality pay does not apply in the overseas area.
  • If an employee brings a child to an overseas location and that child is entitled to attend a DoD school on a space-required basis in accordance with DoDEA Regulation 1342.13, the DoDEA and the Military Department responsible for providing related services will ensure that the child, if eligible for special education, receives a free appropriate public education, including related services pursuant to DoDI 1342.12 and DoDM 1342.12.
  • If an employee brings an infant or toddler (up to 3 years of age) to an overseas location, and that infant or toddler, but for the child's age, is entitled to attend the DoDEA on a space-required basis in accordance with DoDEA Regulation 1342.13, then the Military Department responsible for EIS will provide the infant or toddler with the required EIS in accordance with the eligibility criteria consistent with DoDI 1342.12 and DoDM 1342.12.
  • Employees (and family members) who require medical or dental care in the overseas location will be responsible for obtaining and paying for such care. Access for civilian employees and their families to military medical and dental treatment facilities is on a space-available and reimbursable basis only.
  • Pay retention may be offered to selected applicants for positions at overseas locations. Pay retention will not be offered as an incentive for employees moving between overseas positions.
  • Selectees may receive certain foreign area benefits such as: Living Quarters Allowance (LQA) or government quarters, home leave, etc. Selectees will have their eligibility for foreign area benefits determined at the time of hire in accordance with Department of State Standardized Regulation (DSSR) and DoDI 1400.25 volume 1250.
  • For positions in a foreign country, that country's laws or international agreements may have a direct impact on the ability of an employee's same sex domestic partner or spouse to accompany the employee and receive certain benefits. If you believe you may be affected by these laws and agreements, you should familiarize yourself with relevant information and direct questions concerning a specific country (Foreign Duty Location) to the appropriate Army Human Resources point of contact prior to the acceptance of employment and your entrance on duty.
  • This is a(n) 18 Career Field position.
  • The initial length of this overseas tour is 36 months.
  • When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction/ for more information.
  • Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

You will be evaluated based on how well you meet the qualifications listed in this vacancy announcement. Your qualifications will be evaluated based on your application materials (e.g., resume, supporting documents), the responses you provide on the application questionnaire, and the result of the online assessments required for this position. You will be assessed on the following competencies (knowledge, skills, abilities, and other characteristics):

  • Attention to Detail
  • Customer Service
  • Flexibility
  • Integrity/Honesty
  • Interpersonal Skills
  • Learning
  • Reading Comprehension
  • Reasoning
  • Self-Management
  • Stress Tolerance
  • Teamwork


The USA Hire Assessments includes a cut score based on the minimum level of required proficiency in these critical general competencies. You must meet or exceed the cut score to be considered. You will not be considered for the position if you score below the cut score or fail to complete the assessment.

Overstating your qualifications and/or experience in your application materials or application questionnaire may result in your removal from consideration. Cheating on the online assessment may also result in your removal from consideration.

Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.

If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.

You may claim Military Spouse preference.

You may claim Priority Placement Program (PPP) preference.

Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.

United States Army Installation Management Command

Civilian employees serve a vital role in supporting the Army mission. They provide the skills that are not readily available in the military, but crucial to support military operations. The Army integrates the talents and skills of its military and civilian members to form a Total Army.

Reasonable Accommodation (RA) Requests: If you believe you have a disability (i.e., physical or mental), covered by the Rehabilitation Act of 1973 as amended that would interfere with completing the USA Hire Competency Based Assessments, you will be granted the opportunity to request a RA in your online application. Requests for RA for the Assessments and appropriate supporting documentation for RA must be received prior to starting the USA Hire Competency Based Assessments. Decisions on requests for RA are made on a case-by-case basis. If you meet the minimum qualifications of the position, after notification of the adjudication of your request, you will receive an email invitation to complete the USA Hire Competency Based Assessments, based on your adjudication decision. You must complete all assessments within 48 hours of receiving the URL to access the USA Hire Competency Based Assessments if you received the link after the close of the announcement. To determine if you need a RA, please review the Procedures for Requesting a Reasonable Accommodation for Online Assessments here: https://appsupport.usastaffing.gov/hc/en-us/sections/28980686389652-Reasonable-Accommodation-Information

Agency contact information

Army Applicant Help Desk
Website
https://portal.chra.army.mil/hr_public?id=app_inq
Address
JU-W6EZAA US ARMY INSTALLATION MANAGEMENT CMD
DO NOT MAIL
APO, AE 09708
US

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.