• Utilizes a professional knowledge of electrical and/or mechanical engineering to work large and complex design and construction projects, and to manage an installation Energy Program mandated to reduce overall energy consumption for existing facilities and utility systems, as well as new construction, and/or renovation/improvement projects.
• Manages utility contracts, agreements, metering, and utility budget development. Evaluates program effectiveness and serves as primary energy advisor to installation senior leadership.
• Provides professional advice on sustainable design and energy efficiency practices. Facilitates a team of engineers or coordinates with other flights in facility planning to reduce energy requirements.
• Keeps abreast of emerging technologies, regulatory requirements, and best practices to ensure that facility equipment, projects, and strategies remain relevant and functional.

Conditions of employment

• U.S. Citizenship is required
• Males must be registered for Selective Service, see Legal and Regulatory Guidance
• This posn is subject to provisions of the DoD Priority Placement Program
• For more information on Acq Demo please go to DoD AcqDemo Homepage http://acqdemo.hci.mil/ and Fact Sheet http://acqdemo.hci.mil/faq.html
• Must be able to obtain and maintain a Secret Security Clearance.
• The work requires the employee to access facilities and infrastructure which may require climbing on, crawling under or extensive walking at construction sites, hard hat areas or other base areas.
• This is a drug testing designated position. The incumbent is subject to pre-employment drug testing as a condition of employment, and participation in random drug testing.
• May be required to serve as a member of the Emergency Response Force during exercises or in the event of an actual emergency.
• The work may require the employee to drive a motor vehicle. An appropriate, valid driver’s license may be required.
• Disclosure of Political Appointments
• Work may occasionally require travel away from the normal duty station on military or commercial aircraft.
• This is a TERM appointment, NTE 2 years.
• All federal employees are required to have direct deposit
• This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.
• Depending on the type of position (competitive/excepted) you are selected for, you will be required to serve a 1-year probationary period OR 2-year trial period.
• Upon completion of your probationary/trial period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.

Qualifications

In order to qualify, you must meet the specialized experience requirements described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Professional and Scientific Positions.

BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT: 0830/0850- Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. (Note: You must submit a copy of your transcripts).

OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT) 1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional 1 For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org. 2 The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html. 2 registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. NOTE: You must submit a copy of transcripts with your application. (Note: You must submit a copy of your transcripts).

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

SPECIALIZED EXPERIENCE: Applicants must have at least one (1) year of specialized experience at the next lower broadband NH-02, equivalent to the next to lower grade GS-11 or equivalent in the Federal Service. Specialized experience must include experience in professional engineering concepts, principles, and practices relating to mechanical and/or electrical systems, design, and/or construction in order to adapt precedents or make departures from established approaches in order to provide for specialized engineering and energy management requirements. Experience of facility systems, i.e., heating, ventilation, and air conditioning; lighting; plumbing; building envelope; and central utility systems; knowledge of energy management/conservation program development and renewable energy systems. (Note: You must submit a copy of your transcripts).

KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
1. Knowledge of a broad range of professional engineering concepts, principles, and practices relating to mechanical and/or electrical systems, design, and/or construction in order to adapt precedents or make departures from established approaches in order to provide for specialized engineering and energy management requirements.
2. Knowledge of facility systems; i.e., heating, ventilation, and air conditioning; lighting; plumbing; building envelope; and central utility systems; knowledge of energy management/conservation program development and renewable energy systems.
3. Knowledge of health, safety, and environmental requirements as outlined in applicable standards, regulations, and/or technical orders; program planning and budgeting cycles, financial control and budget systems, and management; and environmental principles, practices, procedures, laws, regulations, and current legislative issues.
4. Skill in using information systems to conduct lifecycle cost analysis, energy use modeling, and other tools to effectively accomplish assigned functions.
5. Ability to research, analyze, interpret, and apply rules, regulations, and procedures to a variety of situations and to recommend timely and economical solutions; and communicate effectively, both orally and in writing.
6. Ability to plan and organize work and coordinate with other engineering disciplines and architects; and maintain good working relations.

PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine your eligibility, qualifications, and quality ranking for this position. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

BASIS OF RATING: Your application will be rated under the Cut Point procedures based on the extent to which the quality, depth, and complexity of your experience and education relate to the qualification requirements. Additional points are not added for Veteran's Preference; however, Veteran's Preference is considered where applicable.

Best Qualified Group: Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements.
Fully Qualified Group: Candidates in this category possess good skills and experience above the minimum requirements.
Basically Qualified Group: Candidates in this category meet the minimum education and/or experience requirements.

Your responses to the questionnaire may be compared to the documents you submit. The documents you submit must support your responses to the online questionnaire. If your application contradicts or does not support your questionnaire responses, you will receive a rating of "not qualified" or "insufficient information" and you will not receive further consideration for this job.

Applicants who disqualify themselves will not be evaluated further.

APPRAISALS/AWARDS: Hiring Managers use objective methods and consider previous performance appraisals and awards in the selection process. Current Federal Civilian employees should list any relevant performance related rating and/or awards in your resume.