Skip to main content
U.S. flag
Back to results
 

Mechanical Engineer

Department of the Army
U.S. Army Corps of Engineers
Southwestern Division (SWD) - Fort Worth Engineering & Construction Division

Summary

About the Position: This Mechanical Engineer position is with the U.S. Army Corps of Engineers, Fort Worth District, Engineering and Construction Division, Engineering Branch with a duty station location of Fort Worth, TX.

This announcement is for current, permanent Army employees considered for a time-limited promotion, reassignment or change to lower grade. External status candidates should apply to Announcement #CEDD-26-12932328-MP.

Go to "Additional Information" below for further details.

Overview

Help
Accepting applications
Open & closing dates
04/13/2026 to 04/23/2026
Salary
$117,247 - $140,188 per year

Based on Special Salary Rate Table 0754

Pay scale & grade
GS 12
Location
1 vacancy in the following location:
Fort Worth, TX
Remote job
No
Telework eligible
Yes—as determined by the agency policy.
Travel Required
Occasional travel - You may be expected to travel up to 15% for this position.
Relocation expenses reimbursed
Yes—You may qualify for reimbursement of relocation expenses in accordance with agency policy. A Recruitment/Relocation Incentive MAY be offered, depending on funding availability and management discretion. An Incentive must be requested by selected applicant at the time of the tentative job offer and approved prior to hire. An Incentive requires a signed service agreement.
Appointment type
Temporary promotion - Position may be filled as a time-limited promotion, reassignment or change to lower grade not to exceed (NTE) 12 months by a current permanent Army employee. Extensions may be possible in accordance with guidance on the job announcement.
Work schedule
Full-time
Service
Competitive
Promotion potential
None
Job family (Series)
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Financial disclosure
No
Bargaining unit status
No
Announcement number
CEDD-26-12932331- MP
Control number
864934500

This job is open to

Help

Clarification from the agency

See "Who May Apply" in the "Qualifications" section for more information on who is eligible to apply for this position.

Videos

Duties

Help
  • Review directive, specification, design criteria and other available data preparatory to the accomplishment of the mechanical design and the preparation of design analysis.
  • Develop, maintain and manage completion schedule, design cost, and construction cost limitation.
  • Prepare all design, amendment, and modification using state-of-the-art Computer-Aided Design and Drafting (CADD) and Building Information Modeling (BIM) technology.
  • Utilize Building Energy Modeling (BEM) and Life Cycle Cost Analysis (LCCA) programs in the preparation of mechanical engineering design.
  • Make field investigation of existing facility and construction project, acting as consultant to construction personnel.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • This position may require the employee to occasionally travel up to 15%.
  • Appointment to this position is subject to a one-year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 315. While probationary the incumbent can be terminated with limited appeal rights.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.

  • Current Department of Army Civilian Employees Applying on Time-Limited Assignments


In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement for Mechanical Engineer:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Specialized Experience: One year of specialized experience which includes: 1) Developing engineering designs and plans for mechanical utility systems to include 3 of the following: heating, ventilation and air conditioning, HVAC controls (basics only), refrigeration, plumbing, and sewage treatment), to include scheduling and budget; AND 2) Utilizing designing technology programs to include Computer-Aided Design and Drafting (CADD) to produce mechanical engineering designs; AND 3) Performing technical reviews of mechanical engineering aspects of Military or Civil work design packages to include technical sufficiency and cost effectiveness. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).

You will be evaluated on the basis of your level of competency in the following areas:

  • Attention to Detail
  • Customer Service
  • Flexibility
  • Integrity/Honesty
  • Interpersonal Skills
  • Learning
  • Reading Comprehension
  • Reasoning
  • Self-Management
  • Stress Tolerance
  • Teamwork


Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-11).

Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • One year trial/probationary period may be required.
  • Direct deposit of pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a Career Program (CP) 18 - Engineer and Scientist position.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction/ for more information.
  • Payment of Permanent Change of Station (PCS) costs is authorized, subject to the provisions of the Joint Travel Regulations.
  • A Recruitment/Relocation Incentive MAY be offered, depending on funding availability and management discretion. An Incentive must be requested by selected applicant at the time of the tentative job offer and approved prior to hire. An Incentive requires a signed service agreement.
  • Position may be filled as a time-limited promotion, reassignment or change to lower grade not to exceed (NTE) 1 year by a current permanent Army employee. Time-limited promotions may be extended up to a maximum of five years. Time-limited reassignments and changes to lower grade may exceed five years; however, return rights may be impacted. Position may be made permanent without further competition.
  • If return rights are approved, a return rights agreement/statement of understanding will be required to be completed prior to appointment.
  • If you are an external status candidate (outside of a current, permanent Army employee) that is eligible for a term appointment not to exceed (NTE) 1 year will need to apply to Announcement #CEDD-26-12932328-MP.

Reasonable Accommodation (RA) Requests: If you believe you have a disability (i.e., physical or mental), covered by the Rehabilitation Act of 1973 as amended that would interfere with completing the USA Hire Competency Based Assessments, you will be granted the opportunity to request a RA in your online application. Requests for RA for the USA Hire Competency Based Assessments and appropriate supporting documentation for RA must be received prior to starting the USA Hire Competency Based Assessments. Decisions on requests for RA are made on a case-by-case basis. If you meet the minimum qualifications of the position, after notification of the adjudication of your request, you will receive an email invitation to complete the USA Hire Competency Based Assessments, based on your adjudication decision. You must complete all assessments within 48 hours of receiving the URL to access the USA Hire Competency Based Assessments if you received the link after the close of the announcement. To determine if you need a RA, please review the Procedures for Requesting a Reasonable Accommodation for Online Assessments here: https://help.usastaffing.gov/Apply/index.php?title=Reasonable_Accommodations_for_USA_Hire

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

You will be evaluated based on how well you meet the qualifications listed in this vacancy announcement. Your qualifications will be evaluated based on your application materials (e.g., resume, supporting documents), the responses you provide on the application questionnaire, and the result of the online assessments required for this position. You will be assessed on the following competencies (knowledge, skills, abilities, and other characteristics):

  • Attention to Detail
  • Customer Service
  • Flexibility
  • Integrity/Honesty
  • Interpersonal Skills
  • Learning
  • Reading Comprehension
  • Reasoning
  • Self-Management
  • Stress Tolerance
  • Teamwork


Overstating your qualifications and/or experience in your application materials or application questionnaire may result in your removal from consideration. Cheating on the online assessment may also result in your removal from consideration.

U.S. Army Corps of Engineers

Looking for a great place to work? The U.S. Army Corps of Engineers (USACE) is one of the best! In 2020, USACE ranked #2 of government large-agency subcomponent! USACE is one of the world's premier public engineering, design, and construction management agencies. We serve the American people, striving to provide the most effective engineering and environmental science solutions to the nation's complex problems affecting national security, the economy and the environment in which we live.

USACE offers a team-inspiring and collaborative work environment; providing challenging and rewarding careers across a variety of disciplines. We rely on leaders with vision, creativity, and programmatic and technical expertise to lead us into the future. Align your talents with your passion and find out why the U. S. Army Corps of Engineers is a great place to work!

Agency contact information

Army Applicant Help Desk
Website
https://portal.chra.army.mil/hr_public?id=app_inq
Address
RK-W07602 US ARMY ENGINEER DISTRICT FORT WORTH
DO NOT MAIL
Fort Worth, TX 76102
US

Visit our careers page

Learn more about what it's like to work at U.S. Army Corps of Engineers, what the agency does, and about the types of careers this agency offers.

https://www.usace.army.mil/Careers/

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.