Skip to main content
U.S. flag
Back to results
 

Engineering Equipment Operator

Department of the Army
U.S. Army Corps of Engineers
Vicksburg District, Operations Division, River Operations Branch, Maintenance Section

Summary

About the Position: As an Engineering Equipment Operator, one will be responsible for construction and maintenance equipment operation including operating a variety of heavy equipment to create, maintain, and repair a variety of improved and unimproved surfaces.

NOTE: Management may make a selection at the WG-08 or WG-10 grade level.

Overview

Help
Accepting applications
Open & closing dates
04/06/2026 to 04/13/2026
Salary
$25.55 - $45.01 per hour
Pay scale & grade
WG 8 - 10
Locations
1 vacancy in the following locations:
Colfax, LA
Vicksburg, MS
Remote job
No
Telework eligible
No
Travel Required
75% or less - You may be expected to travel up to 75% for this position.
Relocation expenses reimbursed
No
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
10 - May be selected at any grade level with non-competitive promotion potential to target grade. Non-competitive promotion potential to the target grade based on time-in-grade requirements and demonstrated ability to perform the higher graded duties.
Supervisory status
No
Security clearance
Not Required
Drug test
Yes
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Financial disclosure
No
Bargaining unit status
Yes
Announcement number
CERG-26-12913868-MP
Control number
863976100

Videos

Duties

Help
  • Operate a variety of heavy equipment which includes but are not limited to bulldozers with 8'-12'power angle-dozer blade, end loaders, diesel powered motor grader, and soil stabilizers.
  • Perform maintenance on a variety of improved and unimproved surfaces such as roads, steep slopes and levees to control erosion.
  • Operate crawler type tractors with bulldozer or angle-dozer blades in moving earth and grade to rough specifications in construction and maintenance work.
  • Operate various heavy equipment to grade surfaces and compact soil.
  • Make carpentry repairs, paints a variety of surfaces, makes plumbing repairs, performs masonry work, accomplishes routine maintenance repairs to electrical fixtures and small equipment, and performs simple flat and horizontal welding assignments.
  • Perform normal maintenance of recreational facilities, office, and shop buildings.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • This position requires the completion of a pre-employment Physical Examination and an annual examination required for physical health and ability or fitness to perform the duties of the position.
  • This position is subject to a pre-employment drug screening, and random testing thereafter, to include testing based on reasonable suspicion and testing due to direct involvement with an on-duty accident.
  • This position requires the incumbent to work outside in all kinds of inclement weather and is subject to discomforts from heat, cold, wind, rain, and dust.
  • This position requires a valid Class A CDL with Air Brake Endorsement or the ability to obtain a valid Class A CDL within 24 months from date of hire. (Note: A copy of your valid Class A CDL must be submitted with this application.)
  • Incumbent may be required to sign a DA Form 7412, Condition of Employment for Certain Civilian Positions Identified Safety-Sensitive Under the DOT, Federal Highway Administration Rules on Drug and Alcohol Testing.
  • This position requires up to 75% travel.
  • Position may be designated Mission Essential.
  • There is a 50 lb. heavy lifting requirement.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities

  • Current Civilian Employees of the Command
  • Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel Workforce
  • Interagency Career Transition Assistance Plan
  • Land Management Workforce Flexibility Act
  • Military Spouses, under Executive Order (E.O.) 13473
  • Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible
  • Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible
  • Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement
  • Priority Placement Program, DoD Retained Grade Preference Eligible
  • Veterans Employment Opportunity Act (VEOA) of 1998


Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience.

There is no specific length of training or experience required. However, you must be able to demonstrate, through experience shown in your written application materials that you possess the sufficient knowledge, skills, and abilities to successfully perform the work of this position without more than normal supervision.

Note: If selected at WG-08, the incumbent must be able to obtain a Class A CDL with Air Brake Endorsement within 24 months from the date of hire.
Note: If selected at WG-10, the incumbent must currently possess a Class A CDL with Air Brake Endorsement. (Note: A copy of your valid Class A CDL must be submitted with this application.)


Minimum Qualifications (Screen Out Element) WG-08: Ability to do the work of a(n) Engineering Equipment Operator without more than normal supervision. I can operate bulldozers, end loaders, forklifts, scrapers, dump trucks, and tractor trailers. I have operated weed eaters, push and riding type lawn mower. I work under close supervision of a work leader or journey-level employee who observes tasks in progress and upon completion to make sure they are properly performed. - Failure to meet this Screen Out Element will result in an ineligible rating.

Minimum Qualifications (Screen Out Element) WG-10: Ability to do the work of a(n) Engineering Equipment Operator without more than normal supervision. I can operate bulldozers, end loaders, forklifts, scrapers, dump trucks, tractor trailers, diesel powered motor grader and perform maintenance on roads such as erosion repair. I have operated weed eaters, push and riding type lawn mower. I have assisted in carpentry repairs, painting a variety of surfaces, making plumbing repairs, and performing masonry work. I work supervision of a work leader or journey-level employee who observes tasks in progress and upon completion to make sure they are properly performed. - Failure to meet this Screen Out Element will result in an ineligible rating.

  • Ability to Do the Work of the Position without More Than Normal Supervision
  • Ability to Drive Safely (Motor Vehicles)
  • Ability to Interpret Instructions, Specifications, etc. (Related to Mobile Equipment Operation)
  • Ability to Operate Safely (Non-motor Vehicles)
  • Operation of Motor Vehicles
  • Reliability and Dependability as a Engineering Equipment Operator
  • Work Practices (Including Keeping Things Neat, Clean, and in Order)
  • Physical Effort: Heavy physical effort is used to perform work; requires constant reaching, bending, turning, and moving hands, arms, feet, and legs to handle different sets of controls to operate equipment and frequently adjust attachments. Considerable strain is caused by the constant vibration of the equipment and the jerking and jolting from operating over rough surfaces. Work is frequently performed in awkward or strained positions due to the location of the controls, attachments, and size of equipment. Semi-skilled trades and crafts work requires considerable standing, stooping, kneeling, bending, and working on ladders and scaffolds. Work intermittently requires incumbent to work in stretched, cramped, and awkward positions. Arm movement is considerable when using hand tools and power tools.
  • Working Conditions: Work is performed in all types of weather, often in an open driver's seat or platform, on hills, slopes, grades, rolling surfaces, and forests. The operator is exposed to injury due to the possibility of the equipment overturning. He is subject to noise, vibration, dust, dirt, and fumes from the motor and exhaust. Trades and crafts and heavy labor work is performed mostly outside in recreation areas with some work performed in a shop area or inside comfort stations.

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • One year probationary period may be required.
  • Appointment is subject to the completion of a favorable suitability or fitness determination, as determined by a background investigation.
  • Direct deposit of pay is required.
  • This is a(n) 18- Construction, Engineering, & Infrastructure Career Field position
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.
  • This position is Non-Exempt from the Fair Labor Standards Act.
  • Nepotism: Under the provisions of 5 USC 3110, an individual may not be appointed into a position if the position is under the supervisory chain of command of a relative.
  • This position is covered by the AFGE bargaining unit.
  • All qualifications requirements must be met by the closing date of this announcement.
  • This announcement may be used to fill like vacancies for three months after the closing date.
  • Management may make a selection at the WG-08 or WG-10 grade level.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.

You may claim Military Spouse preference.

Military Spouse Preference (MSP) applicants will receive preference consideration and will be placed (if selected) at the highest grade for which they have applied and are determined best qualified, up to and including the full performance level.

You may claim Priority Placement Program (PPP) preference.

DoD Priority Placement Program (PPP) Applicants will receive preference consideration at the full-performance grade level only.

Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.

U.S. Army Corps of Engineers

Looking for a great place to work? The U.S. Army Corps of Engineers (USACE) is one of the best! In 2020, USACE ranked #2 of government large-agency subcomponent! USACE is one of the world's premier public engineering, design, and construction management agencies. We serve the American people, striving to provide the most effective engineering and environmental science solutions to the nation's complex problems affecting national security, the economy and the environment in which we live.

USACE offers a team-inspiring and collaborative work environment; providing challenging and rewarding careers across a variety of disciplines. We rely on leaders with vision, creativity, and programmatic and technical expertise to lead us into the future. Align your talents with your passion and find out why the U. S. Army Corps of Engineers is a great place to work!

Agency contact information

Army Applicant Help Desk
Website
https://portal.chra.army.mil/hr_public?id=app_inq
Address
RG-W2R904 US ARMY ENGINEER DISTRICT-VICKSBURG
DO NOT MAIL
Vicksburg, MS 39183
US

Visit our careers page

Learn more about what it's like to work at U.S. Army Corps of Engineers, what the agency does, and about the types of careers this agency offers.

https://www.usace.army.mil/Careers/

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.