Skip to main content
U.S. flag
Back to results
 

Supervisory Interdisciplinary

Department of the Army
U.S. Army Test and Evaluation Command
U.S. Army Aberdeen Test Center (ATC), Multiple Directorates

Summary

About the Position: This announcement is for Division Chief positions located at the U.S. Army Aberdeen Test Center (ATC) with a duty location of Aberdeen Proving Ground, MD, in the following Directorates: Automotive - Automotive Test Support Division; Live Fire - Engineering Systems Technology Division; Live Fire - Design and Fabrication Division; Warfighter - Applied Sciences Test Division; and Safety - Safety Program Management Division. (merit)

Overview

Help
Accepting applications
Open & closing dates
04/03/2026 to 04/07/2026
Salary
$143,913 - $197,200 per year
Pay scale & grade
NH 4
Location
Aberdeen Proving Ground, MD
5 vacancies
Remote job
No
Telework eligible
No
Travel Required
Occasional travel - You may be expected to travel up to 20% of the time for this position.
Relocation expenses reimbursed
No
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
None
Supervisory status
Yes
Security clearance
Secret
Drug test
No
Position sensitivity and risk
Noncritical-Sensitive (NCS)/Moderate Risk
Trust determination process
Financial disclosure
No
Bargaining unit status
No
Announcement number
SDSE-26-12927807-MP
Control number
863775400

Videos

Duties

Help
  • Manage major test and evaluation programs characterized by the requirement for novel plans and/or development of unique solutions.
  • Plan work to be accomplished by subordinates; set and adjust short-term priorities; and prepare schedules for completion of work.
  • Supervise, manage, and direct; through subordinate supervisors; the efforts of 30 to 40 professional, non-professional, technical, and administrative personnel.
  • Authority in the commodity fields/functional areas overseen. Provide technical advice on matters of far reaching consequence in Army materiel development.
  • Evaluate proposals by subordinate Branch Chiefs; assess adequacy and effectiveness of assigned personnel, equipment, and technical procedures; and ensure effective tools, personnel, and organizational structures exist for accomplishment of work.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • Mission-Critical Emergency position for continuity of Government Operations (COOP). During periods of contingency operations incumbent may be required to work overtime, or perform work from areas other than the primary duty location.
  • This position requires the incumbent be able to obtain and maintain a determination of eligibility for a Secret security clearance or access for the duration of employment. A background investigation and credit check are required.
  • This position has a Temporary Duty (TDY) or business travel requirement of 20% of the time.
  • Appointment to this position is subject to a one year probationary period unless the appointee has previously met the requirements as described in 5 CFR Part 315. While probationary the incumbent can be terminated with limited appeal rights.
  • This position is supervisory as defined by the Office of Personnel Management's (OPM) General Schedule Supervisory Guide (GSSG). A one year probation to assess your ability to perform supervisory duties is required unless previously completed.
  • This is an Army Acquisition, Logistics and Technology Workforce position. Selectee must meet position requirements for Test and Evaluation certification within 60 months as of entrance on duty.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities

  • Current Army Test and Evaluation Command employees with Competitive Status
  • Current Civilian Employees of the Command
  • Domestic Defense Industrial Base/Major Range and Test Facilities Base Civilian Personnel Workforce
  • Interagency Career Transition Assistance Plan
  • Land Management Workforce Flexibility Act
  • Military Spouses, under Executive Order (E.O.) 13473
  • Priority Placement Program, DoD Military Reserve (MR) and National Guard (NG) Technician Eligible
  • Priority Placement Program, DoD Military Spouse Preference (MSP) Eligible
  • Priority Placement Program, DoD MR and NG Preference Eligible Tech Receiving Disability Retirement
  • Priority Placement Program, DoD Retained Grade Preference Eligible
  • Veterans Employment Opportunity Act (VEOA) of 1998


In order to qualify, you must meet the education and/or experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

SPECIALIZED EXPERIENCE REQUIRMENT.
One year of specialized experience equivalent to the NH-03/GS-13 grade level in the Federal service which includes work that involves:

1.) Leading or advancing interdisciplinary technical teams by planning or directing work, assigning or balancing tasks, establishing performance standards, and/or managing available resources; and 2) Managing technical programs or projects by overseeing cost, schedule, and performance to ensure the successful development, testing, integration, or sustainment of complex systems (such as materiel systems or software); and 3) Providing authoritative technical guidance and direction in one or more of the following fields: General Engineering, Safety Engineering, Mechanical Engineering, Computer Engineering, Electronics Engineering, Physical Science, Physics, Mathematics, or Computer Science.

Some federal jobs allow you to substitute your education for the required specialized experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

You will be evaluated on the basis of your level of competency in the following areas:

  • Leadership
  • Project Management
  • Strategic Thinking
  • Technical Competence
  • Written Communication

In addition to meeting the specialized experience above, to qualify for this position, you must also meet one of the basic requirements listed below:

EDUCATION REQUIREMENT for Professional Engineer (0800) Series.
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

EDUCATION REQUIREMENT for Physical Science (1301) Series.
A. Degree: Bachelor's degree (or higher degree) in physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics.
OR
B. Combination of Education and Experience: Courses equivalent to one of the majors, as shown in A above, that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education.

Education

EDUCATION REQUIREMENT for Physics (1310) Series.
A. Degree: Bachelor's degree (or higher degree) in physics, or related degree that included at least 24 semester hours in physics. The courses must have included a fundamental course in general physics and, in addition, courses in any two of the following: electricity and magnetism, heat, light, mechanics, modern physics, and sound.
OR
B. Combination of Education and Experience: Courses equivalent to a major in physics totaling at least 24 semester hours, plus appropriate experience or additional education. The courses must have included a fundamental course in general physics and, in addition, courses in any two of the following: electricity and magnetism, heat, light, mechanics, modern physics, and sound.

EDUCATION REQUIREMENT for Mathematics (1520) Series.
A. Degree: Bachelor's degree (or higher degree) in mathematics; or a degree with the equivalent of a major that included at least 24 semester hours in mathematics. The total course work must have included differential and integral calculus and, in addition, four advanced mathematics courses requiring calculus or equivalent mathematics courses as a prerequisite.
OR
B. Combination of Education and Experience: Courses equivalent to a major in mathematics (including at least 24 semester hours in mathematics), as shown in A above, plus appropriate experience or additional education. The total course work must have included differential and integral calculus and, in addition, four advanced mathematics courses requiring calculus or equivalent mathematics courses as a prerequisite.

EDUCATION REQUIREMENT for Computer Science (1550) Series.
Degree: Bachelor's degree (or higher degree) in computer science or bachelor's degree (or higher degree) with 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of the 30 semester hours must have included any combination of statistics and mathematics that included differential and integral calculus.

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • One year trial/probationary period may be required.
  • Direct deposit of pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a Construction, Analysis, Science, Infrastructure & Engineers (CASIE) Career Field position.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • Payment of Permanent Change of Station (PCS) costs is not authorized, based on a determination that a PCS move is not in the Government interest.
  • The U.S. Army Test and Evaluation Command (ATEC) is participating in an alternate personnel system known as the Acquisition Demonstration Project (AcqDemo). Among other features, the Demonstration Project replaced GS grade levels with occupational families and pay bands. The band NH-04 is equal to the former GS-14 Step 01 through GS-15 step 10. ATEC uses salary control points to allow for differentiation in the level of positions within the same broadband. Therefore, the salary for this position will be set no higher than $197,200 including locality.
  • U.S. Army Test and Evaluation Command (ATEC) provides direct support to Army Futures Command and relevant, timely information to senior Army leaders to make future force decisions enabling Multi-Domain Operations through rigorous developmental testing and independent operational tests and evaluations.
  • The Aberdeen Test Center's (ATC) mission statement: Provide test and test support services for authorized customers within and outside of DoD, including Government and non-Government organizations, domestic, and foreign. Perform comprehensive test and training, both real and simulated. Exploit emerging technologies. Develop leading-edge instrumentation and test methodologies.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

As part of the assessment process, your resume will be evaluated using a competency-based method. This structured evaluation measures your qualifications, experience, and skills against the core competencies required for the position. Final scores will determine whether you are referred to the Hiring Manager for further consideration.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.

You may claim Military Spouse preference.

You may claim Priority Placement Program (PPP) preference.

Interagency Career Transition Assistance Program (ICTAP). If you are a Federal employee in the competitive service and your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority for this position. To receive selection priority, you must: (1) meet ICTAP eligibility criteria (2) be rated well-qualified for the position and; (3) submit the appropriate documentation to support your ICTAP eligibility. To be considered well-qualified and receive selection priority applicants must satisfy all qualification requirements for the position and receive a score of 90 or above. Additional information about the program is on OPM's Career Transition Resources website.

U.S. Army Test and Evaluation Command

Civilian employees serve a vital role in supporting the Army mission. They provide the skills that are not readily available in the military, but crucial to support military operations. The Army integrates the talents and skills of its military and civilian members to form a Total Army.

What is the U.S. Army Test and Evaluation Command (ATEC)?

ATEC is the Army's independent test and evaluation organization. We are a team of Civilian and Military personnel working together to provide America's Military with the best equipment to win and return home safely. At ATEC, we have a saying: If a Soldier rides, wears, shoots, or deploys it, we test it. ATEC is at the forefront of testing and evaluating technologies of the future from autonomous aerial/ground vehicles to hypersonic weapons. Each day, top scientists and engineers test and evaluate cutting-edge equipment. Our workforce is highly technical and skilled, comprised of more than 8,500 military, civilian, and contract personnel. Engineers, scientists, technicians, researchers, and evaluators work with innovative, advanced technologies in 24 testing and research locations across the U.S. States and around the world.

Agency contact information

Army Applicant Help Desk
Website
https://portal.chra.army.mil/hr_public?id=app_inq
Address
SE-W4QUAA US ARMY TEST EVALUATION CMD
DO NOT MAIL
Aberdeen Proving Ground, MD 21005
US

Visit our careers page

Learn more about what it's like to work at U.S. Army Test and Evaluation Command, what the agency does, and about the types of careers this agency offers.

http://www.atecciviliancareers.com

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.