Skip to main content
U.S. flag
Back to results
 

Interdisciplinary

Department of the Army
U.S. Army Corps of Engineers
Jacksonville District, Construction Division

Summary

About the Position: Serve as an Interdisciplinary Architect or Engineer (Civil/Mechanical/Electrical) within the Construction Division at Jacksonville District.
This announcement is for current, permanent Army employees that would like to be considered for a time-limited promotion, reassignment or change to lower grade. External status candidates should apply to Announcement # CERL-26-12921723-MP.

Please see "Additional Information" section below for further details.

Overview

Help
Accepting applications
Open & closing dates
04/03/2026 to 04/14/2026
Salary
$53,740 - $103,399 per year

Pay will be set based upon the grade level which selected.

Pay scale & grade
GS 7 - 11
Location
Wellington, FL
Few vacancies
Remote job
No
Telework eligible
No
Travel Required
Occasional travel - You may be expected to travel for this position.
Relocation expenses reimbursed
Yes—You may qualify for reimbursement of relocation expenses in accordance with agency policy.
Appointment type
Multiple - Position may be filled as a time-limited promotion, reassignment or change to lower grade not to exceed 4 years by a current permanent Army employee.
Work schedule
Full-time
Service
Competitive
Promotion potential
11 - Applicants may be selected at the GS-07, GS-09, or GS-11 level. This is a developmental position up to the full performance level, GS-11. Noncompetitive promotion to the full performance level is authorized.
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Financial disclosure
No
Bargaining unit status
No
Announcement number
CERL-26-12920684-MP
Control number
863713800

This job is open to

Help

Clarification from the agency

See "Who May Apply" in the "Qualifications" section for more information on who is eligible to apply for this position.

Videos

Duties

Help
  • Responsibility for the successful execution of multimillion dollar construction contracts throughout the area.
  • Assure verification of regulatory compliance as well as engineering worthiness of proposed change.
  • Review contract plans/specifications/payment requests/progress schedules/submittals/request for information covering heavy civil works construction and appurtenant mechanical and electrical installations.
  • Make daily field inspections of ongoing actual construction projects to determine organizational adequacy.
  • Ensure technical problems during site preparation and construction operations are resolved with minimal impact on project execution.
  • Work with customers/sponsors/outside agencies to promote favorable and effective working relations and ensure adequate construction progress is maintained.
  • Responsible for administration and oversight of construction contracts.
  • Originate new and improved applications and strategies for engineering or architectural concepts, theories, and principles, as required to support project execution.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • This position has a Temporary Duty (TDY) or business travel requirement of 10% of the time.

Qualifications

Who May Apply: Only applicants who meet one of the employment authority categories below are eligible to apply for this job. You will be asked to identify which category or categories you meet, and to provide documents which prove you meet the category or categories you selected. See Proof of Eligibility for an extensive list of document requirements for all employment authorities.

    • Current Department of Army Civilian Employees

In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement for Architect:
A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture.

Basic Requirement for Engineer:
A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.
3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.
4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Specialized Experience for GS-07: One year of specialized experience which includes supporting construction projects by performing routine site inspections and documenting observations; assisting with the preparation and review of contract documents and plans for basic completeness and compliance; applying foundational engineering principles under close supervision; and assisting in monitoring contractor performance, schedules, and work methods. This definition of specialized experience is typical of work performed at the entry level position in the federal service (GS-05).
OR
Education: One full year of graduate level education in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Architecture, Engineering.
OR
Superior Academic Achievement. In order to be creditable under this provision, Superior Academic Achievement must have been gained in a curriculum that is qualifying for the position to be filled, such as that identified in Education above. Superior Academic Achievement is based on:
(1) Class Standing - Applicants must be in the upper third of the graduating class in the college, university, or major subdivision, such as the College of Liberal Arts or the School of Business Administration, based on completed courses;
OR

Education

(2) Grade-Point Average (G.P.A.) - Applicants must have a grade-point average of either (a) 3.0 or higher out of a possible 4.0 ("B" or better) as recorded on your official transcript, or as computed based on 4 years of education, or as computed based on courses completed during the final 2 years of the curriculum; or (b) 3.5 or higher out of a possible 4.0 ("B+" or better) based on the average of the required courses completed in the major field or the required courses in the major field completed during the final 2 years of the curriculum.;
OR
(3) Honor Society Membership - Applicants may be considered eligible based on membership in one of the approved national scholastic honor societies listed by the Association of College Honor Societies (https://www.achshonor.org/).
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) by 18. Add the two percentages.

Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-05).

Specialized Experience GS-09: One year of specialized experience which includes assisting with the oversight and administration of construction contracts; performing site inspections and documenting findings; applying basic engineering principles, practices, and techniques to support office engineering functions; assisting in reviewing contract plans and specifications for clarity, completeness, and feasibility; supporting quality assurance efforts; and providing input on contractor schedules, equipment layouts, and proposed methods of operation. This definition of specialized experience is typical of work performed at the entry-mid level position in the federal service (GS-07).
OR
Education: Master's or equivalent graduate degree or 2 full years of progressively higher-level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Architecture, Engineering.
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages.

Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-07).

Specialized Experience GS-11: One year of specialized experience which includes assisting in the oversight and administration of construction contracts; performing site evaluations and investigations; ensuring quality assurance of assigned projects; utilizing engineering principles, practices, and techniques in all phases of office engineering; managing contract modifications, change orders, and contractor claims; reviewing contract plans and specifications for adequacy, completeness, coverage, and construction feasibility; and evaluating contractor schedules, equipment layouts, plant designs, and methods of operation.This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-09).
OR
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher-level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Architecture, Engineering.
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

Time in Grade Requirement: Applicants who have held a General Schedule (GS) position within the last 52 weeks must have 52 weeks of Federal service at the next lower grade or equivalent (GS-09).

You will be evaluated on the basis of your level of competency in the following areas:

  • Construction Management
  • Oral Communication
  • Problem Solving
  • Quality Assurance


FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/.

Additional information

Position may be filled as a time-limited promotion, reassignment or change to lower grade not to exceed (NTE) 4 years by a current permanent Army employee. Time-limited promotions may be extended up to a maximum of five years. Time limited reassignments and changes to lower grade may exceed five years, however return rights may be impacted. Position may be made permanent without further competition.

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • One year trial/probationary period may be required.
  • Direct deposit of pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a(n) CP-18 Career Field position.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction/ for more information.
  • Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.
  • Relocation/Recruitment incentive may be authorized for a highly qualified candidate and an agency determination that payment is in the Government Interest.
  • If incentives are authorized a service agreement is required.
  • Management may select at any of the grade levels announced.
  • If selected for a developmental grade level, this recruitment provides promotion opportunity to the target grade of the position without further competition (non-competitive promotion potential).
  • If applicable, returns rights may be negotiated upon selection. If return rights are approved, a return rights agreement/statement of understanding will be required to be completed prior to appointment.
  • If you are an external status candidate (e.g. an applicant other than a current, permanent Army employee) that is eligible and would like to be considered for a term appointment not to exceed (NTE) 4 years will need to apply to Announcement # CERL-26-12921723-MP at the following link: https://www.usajobs.gov/GetJob/ViewDetails/863712900

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

As part of the assessment process, your resume will be evaluated using a competency-based method. This structured evaluation measures your qualifications, experience, and skills against the core competencies required for the position. Final scores will determine whether you are referred to the Hiring Manager for further consideration.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.

U.S. Army Corps of Engineers

Looking for a great place to work? The U.S. Army Corps of Engineers (USACE) is one of the best! In 2020, USACE ranked #2 of government large-agency subcomponent! USACE is one of the world's premier public engineering, design, and construction management agencies. We serve the American people, striving to provide the most effective engineering and environmental science solutions to the nation's complex problems affecting national security, the economy and the environment in which we live.

USACE offers a team-inspiring and collaborative work environment; providing challenging and rewarding careers across a variety of disciplines. We rely on leaders with vision, creativity, and programmatic and technical expertise to lead us into the future. Align your talents with your passion and find out why the U. S. Army Corps of Engineers is a great place to work!

Agency contact information

Army Applicant Help Desk
Website
https://portal.chra.army.mil/hr_public?id=app_inq
Address
RL-W2SR02 US ARMY ENGINEER DISTRICT-JACKSONVILLE
DO NOT MAIL
Jacksonville, FL 32202
US

Visit our careers page

Learn more about what it's like to work at U.S. Army Corps of Engineers, what the agency does, and about the types of careers this agency offers.

https://www.usace.army.mil/Careers/

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.