Skip to main content
U.S. flag
Back to results
 

CIVIL ENGINEER

Department of the Air Force
Headquarters, Air Force Reserve Command

Summary

Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information.

The primary purpose of this position is to serve as a senior professional for the Civil Engineer Division, Air Force Reserve Command (AFRC), with a particular emphasis to providing pavements engineering expertise to interpret, develop, and implement policies, criteria, and standards for design and construction activities to AFRC, Numbered Air Forces, and installations.

Overview

Help
Accepting applications
Open & closing dates
04/01/2026 to 04/08/2026
Salary
$106,437 - $138,370 per year
Pay scale & grade
GS 13
Location
FEW vacancies in the following location:
Robins AFB, GA
Remote job
No
Telework eligible
Yes—as determined by the agency policy.
Travel Required
Occasional travel - You may be expected to travel for this position.
Relocation expenses reimbursed
No
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
13
Job family (Series)
Supervisory status
No
Security clearance
Other
Drug test
No
Financial disclosure
No
Bargaining unit status
No
Announcement number
AFMC-12924896-233240-9R-BCE
Control number
863119600

Duties

Help

  1. Provides professional engineering consultative services concerning civil, pavement, geotechnical and drainage systems in support of AFRC missions, in accordance with all DoD, Air Force, and applicable laws and regulations.
  2. Provides technical expertise to activities, staff, installations, and other organizations in the review and approval of AFRC pavement designs and civil utility systems.
  3. Participates and provides pavement and civil utility (to include aircraft arresting systems) engineering expertise in support of Project Planning Document (PPD)/Requirements Documents (RD) development.

Requirements

Help

Conditions of employment

  • U.S. Citizenship Required
  • Males must be registered for Selective Service, see www.sss.gov
  • Must be able to obtain and maintain a SECRET security clearance
  • If authorized, PCS will be paid IAW JTR and AF Regulations. If receiving an authorized PCS, you may be subject to completing/signing a CONUS agreement. More information on PCS requirements, may be found at: https://afciviliancareers.com/regulatory/
  • Recruitment incentives may/may not be authorized
  • This position is subject to provisions of the DoD Priority Placement Program
  • Position may be subject to random drug testing
  • Employee may be required to work other than normal duty hours, to include evenings, weekends and/or holidays
  • Shift work and emergency overtime may be required
  • Employee must maintain current certifications
  • Disclosure of Political Appointments
  • Direct Deposit: All federal employees are required to have direct deposit.
  • Depending on the type of position (competitive/excepted) you are selected for, you will be required to serve a 1-year probationary period OR 2-year trial period.
  • Upon completion of your probationary/trial period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
  • Work will require occasional travel away from the normal duty station on military or commercial aircraft.
  • Experience in soil mechanic, asphalt, and concrete technology in the construction and maintenance of pavement systems, is highly desired.
  • Experience in hydrology/hydraulics, structures, and the application of the concepts, principles, theories, methods, and tools used to design, govern, manage, and sustain water and wastewater (including storm water) resources and facilities desired.
  • Selective Placement Factor: Must possess a Professional Engineer (P.E.) license issued by the state or territorial licensing board.

Qualifications

Experience requirements are described in the Office of Personnel Management (OPM) Qualification Standards for General Schedule Positions, Professional and Scientific. Due to the use of 120-day rosters, this period of experience may be completed within 120 days of the closing date of this announcement.

BASIC REQUIREMENT OR INDIVIDUAL OCCUPATIONAL REQUIREMENT:

  1. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
  1. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
    1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
    2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
    3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
    4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)
In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:
  • Selective Placement Factor: Must possess a Professional Engineer (P.E.) license issued by the state or territorial licensing board.
SPECIALIZED EXPERIENCE: Applicants must have at least one year (52 weeks) of specialized experience at the next lower grade GS-12, or equivalent in other pay systems. Examples of specialized experience includes providing professional engineering consultative services concerning civil, pavement, geotechnical, and/or drainage systems; participating and providing engineering expertise in support of Project Planning and/or Requirements Documents development; and/or applying advanced civil engineering concepts and principles to design construction processes. NOTE: Due to the use of 120-day rosters, this period of experience may be completed within 120 days of the closing date of this announcement.

FEDERAL TIME-IN-GRADE (TIG) REQUIREMENT FOR GENERAL SCHEDULE (GS) POSITIONS: Merit promotion applicants must meet applicable time-in-­grade requirements to be considered eligible. One year at the GS-12 level is required to meet the time-in-grade requirements for the GS-13 level. TIG applies if you are in a current GS position or held a GS position within the previous 52 weeks.

KNOWLEDGE, SKILLS AND ABILITIES (KSAs): Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:
  1. Professional knowledge of a wide range of civil engineering theories, concepts, principles, practices, techniques, and methods to apply advanced concepts and principles to design construction processes, and project management.
  2. Thorough knowledge of design/construction standards, methods, practices, techniques, materials, and contracting procedures related to pavement, civil utility, geotechnical, and drainage systems.
  3. Knowledge of a broad range of civil engineering and construction standards, methods, practices, techniques, materials, and equipment to determine compliance with federal, state, and local codes and regulations.
  4. Knowledge of aesthetic and functional design techniques and skill in preparing preliminary drawings, sketches, and construction drawings.
  5. Ability to research, analyze, interpret, and apply rules, regulations, and procedures in a variety of situations and recommend timely and economical solutions.
  6. Ability to communicate effectively, both orally and in writing, with senior officials from a broad array of activities, including federal and local government and industry.

PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

Education

IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcriptswith the application. Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.

FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements. You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program. It is your responsibility to provide such evidence when applying.

Additional information

Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here. To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.

Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.

Current Federal Civilian employees may apply for temporary and term positions and if selected, a break in service may be required prior to appointment to the position.

120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.

Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.

Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.

Disabled veteran leave is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click here.

If you have questions regarding this announcement and have hearing or speech difficulties click here.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine your eligibility, qualifications, and quality ranking for this position. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

The resume/documents you submit must support your responses to the online questionnaire. If your application contradicts or does not support your questionnaire responses, you will receive a rating of "not qualified" or "insufficient information" and you will not receive further consideration for this job.

For additional information on what to include in your resume, click here.

APPRAISALS/AWARDS: Hiring Managers use objective methods and consider previous performance appraisals and awards in the selection process. Current Federal Civilian employees should list any relevant performance related rating and/or awards in your resume.

Applicants who disqualify themselves will not be evaluated further.

Headquarters, Air Force Reserve Command

The mission of the United States Air Force is: To fly, fight, and win ... Airpower anytime, anywhere. To achieve that mission, the Air Force has a vision of Global Vigilance, Global Reach and Global Power. That vision orbits around three core competencies: Developing Airmen, Technology-to-Warfighting and Integrating Operations. Core competencies and distinctive capabilities are based on a shared commitment to three core values -- integrity first, service before self, and excellence in all we do.

Click here to view the AF Civilian Employment Eligibility Guide:

  • AF DCIPS Interchange
  • AF Internal Employee
  • EO 12721 Certain Former Overseas Employees
  • EO 13473 Appointment of Certain Military Spouses
  • Interagency Career Transition Assistance Plan
  • Land Management Employee
  • Military Spouse Preference
  • PPP DoD Military Reserve (MR) and National Guard (NG) Technicians
  • PPP DoD Retained Grade Preference Eligible
  • PPP Mil Res (MR) and Nat Guard (NG) Pref Eligible Technician Receiving Disability Retirement
  • Veterans Employment Opportunities Act

Agency contact information

Total Force Service Center
Phone
1-800-525-0102
Email
DO.NOT.EMAIL@CALL.ONLY
Address
AFRC Robins AFB
455 Bryon St
Suite 474
Robins AFB, GA 31098
US

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.