Skip to main content
U.S. flag
Back to results
 

Interdisciplinary (Engineer/Architect)

Department of the Army
U.S. Army Corps of Engineers
Southwestern Division (SWD)

Summary

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD to recruit and appoint qualified candidates to positions in the competitive service.

About the Position: This is a Interdisciplinary (Engineer/Architect) GS-08XX-12 position for the U.S. Army Corps of Engineers (USACE) Southwestern Division, Tulsa District, Tulsa, Oklahoma.

For additional information on USACE Tulsa District click Here

Overview

Help
Accepting applications
Open & closing dates
03/20/2026 to 03/31/2026
Salary
$89,508 to - $116,362 per year

Salary reflected is for Tulsa, OK. Special Salary Rate Table may apply - see "Additional Information" Section below for further details.

Pay scale & grade
GS 12
Location
1 vacancy in the following location:
Tulsa, OK
Remote job
No
Telework eligible
Yes—as determined by the agency policy. Eligible for situational telework only.
Travel Required
Occasional travel - You may be expected to travel up to 5% for this position.
Relocation expenses reimbursed
Yes—PCS is authorized and a Relocation/Recruitment Incentive may be authorized -- see "Additional Information" Section below for further details.
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
None
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Financial disclosure
No
Bargaining unit status
No
Announcement number
CEDD-26-12917724-DHA
Control number
862054800

Videos

Duties

Help
  • Serve as a technical manager for all assigned major military design projects in the District including both Air Force and Army.
  • Manage and oversee the development of general and detailed drawings, design analyses, computations and calculations, and technical specifications for assigned military design projects.
  • Perform engineering and design technical review of all major military designs provided by Architect-Engineer firms under contract to the District.
  • Review selected construction contract submittals identified as requiring special engineering expertise or extensions of design.
  • Participate and is actively involved in life cycle project management.
  • Visit the sites of proposed or existing projects to gather and/or interpret design data, assist in the interpretation of plans and specifications and, when requested, to recommend revisions to design documents to accommodate changed field conditions.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.

Qualifications

Who May Apply: US Citizens

In order to qualify, you must meet the experience and/or education requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Specialized Experience:

One year of specialized experience which includes: 1) Preparing design drawings and/or specifications for infrastructure projects; AND 2) Performing technical reviews of architectural designs to ensure compliance with established project criteria; AND 3) Conducting site investigations to gather design data and document existing field conditions for proposed or existing projects. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).

Note: Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

In addition to meeting the specialized experience requirement above, to qualify for this position you must also meet the basic education requirement listed below:

Education

Basic Requirements (for Engineers):
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1, or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all-inclusive.)

Basic Requirement for (Architect):
A. Degree: Bachelor's degree (or higher degree) in architecture or in a related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.
OR
B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following: (1) Related Curriculum - Degree in architectural engineering provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in statement A above, or (2) Experience: 1 year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of any college courses, 5 years of such experience is required. This experience must have demonstrated that you have acquired a thorough knowledge of the fundamental principles and theories of professional architecture.

***NOTE: You MUST provide a copy of your transcripts with your application package or you will be rated ineligible.***

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Additional information

  • This position is authorized for a Special Salary Rate for performing work directly in the generation and/or transmission of electric power for certain series and duty locations. Determination of a Special Salary Rate will be decided at time of selection. Salary Range for SSR 0755 is: $104,502 - $127,443.
  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • One year trial/probationary period may be required.
  • Direct Deposit of Pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is an Engineers and Scientists Career Field 18 position.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction.htm for more information.
  • Payment of Permanent Change of Station (PCS) costs is authorized, subject to the provisions of the Joint Travel Regulations.
  • A Relocation Incentive may be authorized for current Federal employees.
  • A Recruitment Incentive may be authorized for new civilian federal employee (initial appointment), or previous civilian federal employee with a break in service of at least 90 days.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.

You may claim Priority Placement Program (PPP) preference.


Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.