Skip to main content
U.S. flag
Back to results
 

POWERED SUPPORT SYSTEMS MECHANIC

Department of the Air Force
Air Force Materiel Command
526 ELECTRONICS MAINT SQ/MXDPB May be used to fill like vacancies at Hill AFB.

Summary

Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information.

The primary purpose of this position, Power Support Systems Mechanic, WG-5378-11 is to serve as a Ground Power Flight Technical expert; developing technical procedures for test, troubleshoot, modify, repair, and overhaul of a variety of complex Aerospace Ground Equipment assets and engines and components.

Overview

Help
Accepting applications
Open & closing dates
03/10/2026 to 03/16/2026
Salary
$67,744 to - $79,014 per year

Hourly: $32.46 -$37.86

Pay scale & grade
WG 11
Location
Few vacancies in the following location:
Hill AFB, UT
Remote job
No
Telework eligible
No
Travel Required
Occasional travel - May be required to travel by military or commercial aircraft in the performance of temporary duty assignments.
Relocation expenses reimbursed
No
Appointment type
Permanent
Work schedule
Multiple Schedules
Service
Competitive
Promotion potential
11
Supervisory status
No
Security clearance
Other
Drug test
Yes
Financial disclosure
No
Bargaining unit status
Yes
Announcement number
AFMC-12900313-184179-8L-LMM
Control number
860330500

Duties

Help

  • Evaluate and write procedures for installation, inspection, and performing modifications and repairs to electrical power support systems such as electrical power plants and power distribution equipment.
  • Perform preventive maintenance on electrical power support systems.
  • Perform major repair, replacement, and overhaul of power support system components such as diesel, multifuel, or gas turbine engines, and electrical accessories of engines.
  • Troubleshoot electrical power support systems such as power plants and power distribution equipment.
  • Monitor open 202s and ensure adequate follow-up to prevent 202s from going overdue.
  • Utilize safety practices and procedures following established safety rules and regulations and maintain a safe and clean work environment.

Requirements

Help

Conditions of employment

  • U.S. Citizenship Required
  • Males must be registered for Selective Service, see www.sss.gov
  • The position is subject to provisions of the DoD Priority Placement Program
  • Disclosure of Political Appointments
  • Relocation costs or other incentives may be available and considered by the organization.
  • This position may require travel.
  • This position may require drug testing, and the candidate may be subject to passing a drug test upon selection.
  • Selectee is expected to be granted with and/or maintain the appropriate security clearance required for the position.
  • Selectee may be required to serve a probationary or trial period.
  • Direct Deposit: All federal employees are required to have direct deposit.
  • Depending on the type of position (competitive/excepted) you are selected for, you will be required to serve a 1-year probationary period OR 2-year trial period.
  • Upon completion of your probationary/trial period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
  • The work will require the incumbent to drive a motor vehicle up to and including a 2-1/2-ton truck. And appropriate valid driver's license will be required for the position.
  • Position will require the incumbent to operate a forklift up to 15,000-pound capacity to move heavy power support equipment.
  • The incumbent may be required to work other than normal duty hours, which may include evenings, weekends, and/or holidays.
  • Shift work may be required.
  • Emergency overtime may be required. May be required to train/guide lower-graded(or other trades) military/civilian employees. May be required to perform frequent and extensive temporary duty (TDY) at sites in and out of the continental United States.
  • A pre-employment physical examination will be required.

Qualifications

In order to qualify, you must meet the quality level of experience requirements described in the Office of Personnel Management (OPM) Qualification Standards Handbook X-118C.

QUALIFICATIONS: Applicants will be rated in accordance with the OPM Qualification Standard Handbook X-118C for the WG-5300 Industrial Equipment Maintenance Family. Although a specific length of time and experience is not required for most blue-collar positions, you must meet any screen-out element listed, and show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on the quality of experience, not necessarily the length of time.

The screen out element for this position is the Ability to Do The Work Of The Position Without More Than Normal Supervision

JOB ELEMENTS: Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the following areas:

  1. Knowledge of Equipment Assembly, Installation, Repair, etc.
  2. Technical Practices (theoretical, precise, artistic)
  3. Ability To Interpret Instructions, Specification, etc. (includes blueprinting reading)
  4. Ability To Use and Maintain Tools and Equipment
  5. Knowledge of Materials
  6. Trouble Shooting
PART-TIME OR UNPAID EXPERIENCE: Credit will be given for appropriate unpaid and or part-time work. You must clearly identify the duties and responsibilities in each position held and the total number of hours per week.

VOLUNTEER WORK EXPERIENCE: Refers to paid and unpaid experience, including volunteer work done through National Service Programs (i.e., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student and social). Volunteer work helps build critical competencies, knowledge and skills that can provide valuable training and experience that translates directly to paid employment. You will receive credit for all qualifying experience, including volunteer experience.

PHYSICAL DEMANDS: Performs work that involves frequent walking, bending, reaching, and crouching, standing, and arm movement. Sometimes must work in awkward positions or cramped areas. Must be able to frequently lift and carry items weighing 25 pounds and overusing jacks, hoists, or helpers.

WORKING CONDITIONS: May work inside or outside. Inside work involves frequent exposure to drafts, changing temperature, and loud noise. Outside work may involve exposure to bad weather, rain or snow, wet, or icy conditions. Both inside and outside, frequently exposed to irritation or discomfort from dust, heat, fumes, and hard damp floors or surfaces. May work on parts and systems which are dirty and greasy, and which may be dangerous to operate or repair because of defects. Incumbent is frequently exposed to the possibility of receiving burns, bruises, strains, and electrical shock while repairing, positioning, adjusting and moving equipment and is exposed to the possibility of receiving bums and skin irritations from acids, fluids, and lubricants. To reduce the dangers and irritations from the above conditions, the incumbent must follow numerous safety procedures and wear equipment such as protective eyeglasses, ear devices, hard hats, hard-toe-shoes, respirators, gloves, and clothing. Some of these safety items may be uncomfortable to wear or use and may be worn or used for long periods.

Education

This job does not have an education qualification requirement.

Additional information

Hill Air Force Base provides worldwide engineering and logistics management for the F-16 Fighting Falcon, A-10 Thunderbolt II, and the Minuteman III ICBM, and performs depot maintenance of the F-16, A-10, and C-130 Hercules aircraft. The base is located between Ogden and Salt Lake City. The area is known for year round activities, including skiing, hiking, boating, extreme sports, fishing and hunting, with four distinct seasons, low humidity and moderate snow fall in the valley.

Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here. To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position. You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.

Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants. Click here for more information.

120-Day Register: This announcement may result in a 120-day register that may be used to fill like vacancies for 120 days after the closing date. Applicants may be referred for consideration as vacancies occur.

Military Spouse Preference (MSP) Eligible: MSP applicants, if determined best qualified, must be selected and placed at the highest grade for which they applied. You must include a completed copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility for MSP. Click here to obtain/download a copy of the DD Form 3145-4, Military Spouse PPP Self-Certification Checklist.

Priority Placement Program (PPP) Applicant Eligible: PPP Applicants, if determined well qualified and selected, will be placed at the at the full performance level. You must include the applicable completed copy of the PPP Self-Certification Checklist dated within 30 days along with the documents identified on the checklist to verify your eligibility as a PPP Applicant. Click here to obtain/download a copy of the applicable PPP Self-Certification Checklist (DD3145-1 through DD3145-4, select the appropriate checklist for your claimed preference). To determine the applicable PPP Self-Certification Checklist required to substantiate the eligibilities you are claiming, refer to the AF Civilian Employment Eligibility Guide located in the Required Documents section of this vacancy announcement.

Direct Deposit: All federal employees are required to have direct deposit.

Incentives: Recruitment and/or retention incentives may or may not be used.

Disabled veteran leave is available to a Federal employee hired on/after 5 Nov 2016, who is a veteran with a service-connected disability rating of 30% or more. For more information, click here.

If you have questions regarding this announcement and have hearing or speech difficulties click here.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine your eligibility, qualifications, and quality ranking for this position. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

The resume/documents you submit must support your responses to the online questionnaire. If your application contradicts or does not support your questionnaire responses, you will receive a rating of "not qualified" or "insufficient information" and you will not receive further consideration for this job.

Applicants who disqualify themselves will not be evaluated further.

APPRAISALS/AWARDS: Hiring Managers use objective methods and consider previous performance appraisals and awards in the selection process. Current Federal Civilian employees should list any relevant performance related rating and/or awards in your resume.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.