Skip to main content
U.S. flag
Back to results
 

INTERDISCIPLINARY SUPV GENERAL ENGINEER/ARCHITECT

Department of the Navy
Naval Facilities Engineering Systems Command

Summary

You will serve as a Supervisory General Engineer/Architect in the Naval Facilities Engineering *Systems* Command of NAV FACILITIES ENGINEERING COMMAND SE, Italy.

Overview

Help
Accepting applications
Open & closing dates
03/06/2026 to 03/11/2026
Salary
$106,437 to - $138,370 per year
Pay scale & grade
GS 13
Location
1 vacancy in the following location:
Gulfport, MS
Remote job
No
Telework eligible
Yes—This position is eligible for ad-hoc/situational telework at the discretion of management.
Travel Required
Not required
Relocation expenses reimbursed
Yes—Relocation expenses (i.e. PCS) for candidates outside of the commuting area are authorized in accordance with applicable travel regulations and Department of Navy policy.
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
13
Supervisory status
Yes
Security clearance
Secret
Drug test
No
Position sensitivity and risk
Noncritical-Sensitive (NCS)/Moderate Risk
Trust determination process
Financial disclosure
Yes - You will be required to complete ethics orientation within three months of appointment and submit a Confidential Financial Disclosure Report, OGE-450, within 30 days of appointment
Bargaining unit status
No
Announcement number
ST-12899104-26-VMF
Control number
860040600

Duties

Help
  • You will manage the Planning, Design and Construction (PDC) workload at the assigned PWD.
  • You will provide senior leadership related to the three primary roles and responsibilities in the PDC: Planning, Design and Project Management and Construction Management.
  • You will actively supervise a diverse technical staff comprised of US and local national civilians and military Civil Engineer Corps Junior Officers.
  • You will be responsible for forecasting workload into out-years for resource planning requests.
  • You will serve as technical advisor to journeymen and lower grade engineers/ architects on complex engineering problems and projects.
  • You will lead higher-level meetings concerning project status and controversial matters.
  • You will be required to obtain and maintain a current valid United States driver’s license.
  • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  • This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
  • You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.
  • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  • Supervisors in the executive branch have a heightened personal responsibility for advancing government ethics. You will be required to review the 14 General Principles of Ethical Conduct at 5 CFR 2635.101.

Requirements

Help

Conditions of employment

  • Must be a US Citizen.
  • Must be determined suitable for federal employment.
  • Must participate in the direct deposit pay program.
  • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
  • Generally, current federal employees applying for GS jobs must serve at least one year at the next lower grade level. This requirement is called time-in-grade. Time-in-grade requirements must be met by the closing date of this announcement.
  • This position may require travel to places within and outside the contiguous United States which could include remote or isolated sites. You may be required to travel on military and commercial aircraft for extended periods of time.
  • If eligible for permanent change of station, the appointee will be required to sign a transportation agreement to establish a Government time in service requirement of 12 months.
  • Males born after 12-31-59 must be registered for Selective Service.
  • The incumbent is required to be a registered Professional Engineer or Architect.
  • The incumbent may be required to work overtime. Overtime may be required but not guaranteed on a regular basis.

Qualifications

In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience at or equivalent to the GS-12 grade level or pay band in the Federal service or equivalent experience in the private or public sector as a professional ENGINEER or ARCHITECT.

1) Work with project leaders through planning, design, pre-award and construction to apply knowledge and experience of advanced concepts, principles and practices in engineering/architecture to develop creative solutions to problems not remedied by standard, predefined processes.
2) Provide projections for field office planning, design and construction workload to determine resource requirements.
3) Manage workload and be computer literate/ comfortable with performing most daily tasks through interactions in computer-based programs to provide status updates. Programs may include: eContracts, eProjects, Enterprise Safety Application Management Systems (ESAMS), and Facility Accident and Incident Reporting (FAIR).
4) Evaluate Project Management and Engineering Branch requirements as it relates to project schedule, cost impacts, and quality control/quality assurance efforts to maximize effectiveness of PDC Directorate deliverables and support.

Note: This information must be supported in your resume to be considered for this position.

Additional qualification information can be found from the following Office of Personnel Management website:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series

Architecture Series 0808
General Engineering Series 0801

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

CONDITIONS OF EMPLOYMENT CONTINUED:

The work is generally sedentary with periodic need for site visits involving standing, walking, climbing, bending and crawling to assess or inspect existing and new facilities and generally traversing construction sites. Occasional surveys and inspections of the Navy and Marine Corps' infrastructure will require some physical exertion. (For example, crawlspace inspections, above and below deck pier evaluations, etc.). A valid driver's license is required for driving to site visits and meetings at various installations.

Work generally involves minimal risks and observance of safety precautions typical of an office setting. However, field inspections are made which may require protective clothing. Protective clothing worn in field inspections includes hard hats, reflective vest, hard-toed boots, safety glasses, and ear protection. Other protective wear such as safety harnesses, coveralls, and gloves may be required for certain situations.

The incumbent may be assigned to work in areas where certain potentially harmful physical and chemical agents are present. These agents may include but are not limited to fumes, dust, noise, heat, ionizing and non-ionizing radiation, chemicals, etc. To ensure employee safety and health, NAVFAC FECs maintain personnel protection programs consistent with applicable laws and regulations. These programs may include protective equipment (i.e. ear protection or respirator), and laws and medical surveillance the incumbent may be required to take medical examinations to assess medical qualifications for duty involving these agents.

The incumbent shall report directly to a military (Navy Civil Engineer Corps) FEAD Director typically ranging in rank from O-2 (LTJG) to O-4 (Lieutenant Commander). However, the PMEB also has an operational responsibility to the FEC CI Construction and Design Product Line Coordinators to ensure assigned projects adhere to Command and CIBL policies, processes, and metrics goals. The incumbent must be computer literate and competent in the use of word processing, spreadsheets, electronic mail, internet and relevant CIBL-related software. Travel by military or commercial aircraft may be required.

This position has a selective placement factor that will be used to screen out ineligible candidates. The selective placement factor is: You must currently be a licensed Professional Engineer (PE) if applying for the 0801 series. You must be a Registered Architect (RA) if applying for the 0808 series. Your license or registration must be held in a State, the District of Columbia, the Commonwealth of Puerto Rico, or a territory of the United States.

EDUCATION CONTINUED:

Architecture Series 0808

1. Degree: architecture; or related field that included 60 semester hours of course work in architecture or related disciplines of which at least (1) 30 semester hours were in architectural design, and (2) 6 semester hours were in each of the following: structural technology, properties of materials and methods of construction, and environmental control systems.
OR
2. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the arts and sciences underlying professional architecture, and (2) a good understanding, both theoretical and practical, of the architectural principles, methods, and techniques and their applications to the design and construction or improvement of buildings. The adequacy of such background must be demonstrated by at least one of the following:

1.Related Curriculum: Degree in architectural engineering may be accepted as satisfying in full the basic requirements, provided the completed course work in architectural engineering provided knowledge, skills, and abilities substantially equivalent to those provided in the courses specified in paragraph A. The curriculum for a degree in either architecture or architectural engineering covers function, esthetics, site, structure, economics, mechanical-electrical, and other engineering problems related to the design and construction of buildings primarily (but not exclusively) intended to house human activities. The courses required for a degree in architecture generally place emphasis upon planning, esthetics, and materials and methods of construction, while the courses for an architectural engineering degree place equal or greater weight on the technical engineering aspects such as structural systems, mechanical systems, and the properties of materials. Because of this difference in emphasis, persons with degrees in architecture may have a preference for work assignments that offer greater opportunities for them to express their artistic and creative abilities. As a result, they may be more concerned with planning and design aspects of architecture, and persons with degrees in architectural engineering may be more engaged in aspects emphasizing technical engineering considerations.
2.Experience: An applicant lacking a degree in architecture must have had l year of experience in an architect's office or in architectural work for each year short of graduation from a program of study in architecture. In the absence of college courses, 5 years of such experience is required. This experience must have demonstrated that the applicant has acquired a thorough knowledge of the fundamental principles and theories of professional architecture.


Education

Applicants must meet the following Basic Requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Applicants must possess.

General Engineering Series 0801
A. Degree: Engineering. To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
OR
B. Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:
1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.
2. Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE)2 examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico.
3. Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A.
4. Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.)

SEE QUALIFICATION TAB FOR EDUCATION ON ARCHITECT SERIES

ADDITIONAL INFORMATION CONTINUED:

ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/

This position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.

Additional information

This position is covered by the Department of Defense Priority Placement and Alternate Placement Programs.

Additional vacancies may be filled by this announcement.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions.

Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf

ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/

Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.

Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.

A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

In order to qualify for this position, your resume must provide sufficient experience and/or education, knowledge, skills, and abilities to perform the duties of the specific position for which you are being considered. Your resume is the key means we have for evaluating your skills, knowledge, and abilities as they relate to this position. Therefore, we encourage you to be clear and specific when describing your experience.

When the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement. You will be rated based on the information provided in your resume and application package, along with your supporting documentation to determine your ability to demonstrate the following competencies:



QUALITY ASSURANCE
RESEARCH AND DEVELOPMNENT
ENGINEERING PROJECT MANAGEMENT
PROBLEM SOLVING
DEVELOPING OTHER

This recruitment will utilize the following technical assessment tools: Structured Resume Review and Structured Interview

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.

If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualified.

Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

All eligibility, qualifications, and time-in-grade requirements must be met by the closing date of this announcement.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.