Skip to main content
U.S. flag
Back to results
 

ENGINEER

Department of the Navy
Naval Sea Systems Command
Naval Surface Warfare Center, Carderock Division

Summary

You will serve as an ENGINEER in the Survivability and Weapons Effects Division of CARDEROCK DIV NS.

This is an interdisciplinary position and may be filled by a General (0801-series) or a Mechanical (0830-series) Engineer depending upon the qualifications of the candidate. Applicants in positions with occupational series other than those listed (0801 and 0830) may apply; however, you must apply directly to the series listed in this vacancy that is most applicable to your qualifications.

Overview

Help
Accepting applications
Open & closing dates
03/02/2026 to 03/09/2026
Salary
$143,913 to - $197,200 per year
Pay scale & grade
ND 5
Location
1 vacancy in the following location:
Naval Surface Warfare Center, MD
1 vacancy
Remote job
No
Telework eligible
Yes—This position is eligible for ad-hoc/situational telework at the discretion of management.
Travel Required
25% or less - You may be expected to travel for this position.
Relocation expenses reimbursed
No
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
None
Supervisory status
No
Security clearance
Secret
Drug test
No
Financial disclosure
No
Bargaining unit status
No
Announcement number
ST-12896783-26-CCL
Control number
859421800

Duties

Help
  • You will lead planning and direct execution for large, complex shock modeling and simulation efforts.
  • You will develop, implement, and transition new technologies involving modeling and simulation strategies that improve the ability of ship, components, and personnel to resist the damaging effects of an underwater weapon attack.
  • You will develop, implement, and transition new shock qualification methodologies, acceptance criteria, and strategies for which transient shock analysis is a key element.
  • You will develop and implement shock data analysis techniques and tools.
  • You will defend technical approaches and findings throughout the course of a given task and coordinate technical recommendations through the NAVSEA Technical Warrant Holders and DOT and E oversight.
  • You will provide technical advice to coworkers, top level Navy management and other technical experts in the field.
  • You will formulate research and development work proposals and solicit resources from current and prospective sponsors.
  • You will develop and implement an overarching plan to train and mentor junior engineers to develop and maintain a pipeline of capable people in assigned knowledge areas.
  • You will support the technical authority in development and enforcement of shock requirements and policies.

Requirements

Help

Conditions of employment

  • Must be a US Citizen.
  • Must be determined suitable for federal employment.
  • Must participate in the direct deposit pay program.
  • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
  • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
  • Males born after 12-31-59 must be registered for Selective Service.
  • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
  • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
  • This position requires participation in tests involving underwater detonation of explosives and must be familiar with and follow Navy and NSWC explosive safety instructions and standard operating procedures.
  • The position requires laboratory work and field test activities include extreme environmental and climatic factors, stooping, bending, lifting of heavy objects, and positioning through spaces aboard Navy ships and test vessels.
  • The position requires good to excellent physical health and qualification for unlimited duty.

Qualifications

Your resume must demonstrate at least one year of specialized experience at or equivalent to the ND-4 pay band (GS-12 and GS-13 equivalency) in the Federal service or equivalent experience in the private or public sector: as a professional engineer leading the technical development for a major shock modeling and simulation program; working with underwater explosions modeling and simulations; researching and developing new modeling and simulation approaches and collaborating on a team project to harden U.S Navy platforms against underwater explosions.

Additional qualification information can be found from the following Office of Personnel Management website:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/general-engineering-series-0801/

https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/mechanical-engineering-series-0830/
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf

Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.

Education

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:

Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.

OR

Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org

OR

Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.

OR

Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)

OR

Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

Additional information

This position is covered by the Department of Defense Priority Placement Program.

This position is part of the Warfare Centers Personnel Demonstration Project.

The ND-5 pay band encompasses positions equivalent to GS-14 and GS-15.

Additional vacancies may be filled by this announcement.

A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area. Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary. Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes. Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions.

Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf

PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.

To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/

Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

When the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement. You will be rated based on the information provided in your resume and application package, along with your supporting documentation to determine your ability to demonstrate the following competencies:



PROBLEM SOLVING
RESEARCH AND DEVELOPMENT
SYSTEMS TESTING AND EVALUATION
ENGINEERING PROJECT MANAGEMENT
DEVELOPING OTHERS

This recruitment will utilize the following technical assessment tools: Structured Resume Review, Situation Judgment Test, and Structured Interview.

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation.

If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, your score may be adjusted to more accurately reflect your abilities or you may be found ineligible/not qualified.

Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

All eligibility and qualifications requirements must be met by the closing date of this announcement.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.