Skip to main content
U.S. flag
Back to results
 

MECHANICAL ENGINEER

Department of the Army
United States Army Installation Management Command
US ARMY GARRISON ALASKA DIRECTORATE OF PUBLIC WORKS ENGINEERING DIVISION

Summary

This is a Direct Hire Authority (DHA) solicitation utilizing the DHA for Certain Personnel of the DoD Workforce to recruit and appoint qualified candidates to positions in the competitive service.

About the Position: You will apply complex mechanical engineering concepts, principles and practices sufficient to design and layout HVAC systems and a variety of other mechanical systems and equipment.

Overview

Help
Accepting applications
Open & closing dates
02/23/2026 to 03/08/2026
Salary
$84,759 to - $132,795 per year

plus 1.49% Cost of Living Allowance (COLA)

Pay scale & grade
GS 9 - 12
Location
1 vacancy in the following location:
Fort Wainwright, AK
Remote job
No
Telework eligible
Yes—as determined by the agency policy.
Travel Required
Occasional travel - You may be expected to travel up to 5% for this position.
Relocation expenses reimbursed
Yes—You may qualify for reimbursement of relocation expenses in accordance with agency policy.
Appointment type
Permanent
Work schedule
Full-time
Service
Competitive
Promotion potential
12
Job family (Series)
Supervisory status
No
Security clearance
Not Required
Drug test
No
Position sensitivity and risk
Non-sensitive (NS)/Low Risk
Trust determination process
Financial disclosure
No
Bargaining unit status
No
Announcement number
IPA1-26-12894334 - DHA
Control number
858467800

Videos

Duties

Help
  • This is a developmental position; duties listed below will be performed in a developmental capacity at the GS-09 and GS11 grade level. At the full performance, GS-12, the incumbent will:
  • Perform research and confers with contractors and manufacturer's representatives to resolve construction and equipment problems.
  • Evaluate field conditions as they apply to overall projects and resolves problems due to site conditions making improvements in the design, construction and operation of future projects
  • Review contractor shop drawing submittals, test reports, operation and maintenance manuals, etc. involving mechanical features of the project.
  • Serve as technical authority for mechanical and utility systems in final on-site inspection for specialty and unique projects.
  • Prepare designs, design analysis and specifications for the type of utility systems and other complex mechanical features for a variety of construction projects.
  • Serve as a mechanical engineering responsible for providing technical engineering and contract administration support to the installation and participates in quality assurance activities for the inspection of the project.

Requirements

Help

Conditions of employment

  • Appointment may be subject to a suitability or fitness determination, as determined by a completed background investigation.
  • Incumbent may be excepted to travel up to 5% for this position.
  • Incumbent must possess or obtain and maintain a valid state drivers license.

Qualifications

Who May Apply: US Citizens

In order to qualify, you must meet the education and experience requirements described below. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional; philanthropic; religious; spiritual; community; student; social). You will receive credit for all qualifying experience, including volunteer experience. Your resume must clearly describe your relevant experience; if qualifying based on education, your transcripts will be required as part of your application. Additional information about transcripts is in this document.

Basic Requirement for Mechanical Engineer:

A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR

B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following:

1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions.

2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico.

3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program.

4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

In addition to meeting the basic requirement above, to qualify for this position you must also meet the qualification requirements listed below:

Specialized Experience GS-09:
One year of specialized experience which includes 1) assisting in the review of contractor submittals (e.g., shop drawings, product data, and material samples) by comparing information to established standards; 2) supporting field visits to document construction activities; 3) helping review design documents and specifications to identify discrepancies; and 4) drafting basic engineering calculations, preliminary drawings and performing basic scope of work, design drawings, and specifications for construction, maintenance, or repair projects. This definition of specialized experience is typical of work performed at the second lower grade/level position in the federal service (GS-07).
OR
Education: Master's or equivalent graduate degree or 2 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Engineering, Architecture and/or a Natural or Physical Science.
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the first year (total graduate semester hours minus 18) by 18. Add the two percentages.

Specialized Experience GS-11: One year of specialized experience which includes 1) reviewing contractor submittals (e.g., shop drawings, product data, and material samples) for technical accuracy and compliance with established requirements; 2) performing field observations to monitor construction progress and identify potential issues; 3) assisting in evaluating design documents and recommending routine modifications to improve constructability or resolve discrepancies; and 4) preparing portions of scopes of work, design drawings, engineering calculations, and specifications for construction, maintenance, or repair projects. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-09).
OR
Education: Ph.D. or equivalent doctoral degree or 3 full years of progressively higher level graduate education leading to such a degree in a field which demonstrates the knowledge, skills, and abilities necessary to do the work of the position, such as: Engineering, Architecture and/or a Natural or Physical Science.
OR
Combination of Education and Experience: A combination of education and experience may be used to qualify for this position as long as the computed percentage of the requirements is at least 100%. To compute the percentage of the requirements, divide your total months of experience by 12. Then divide the total number of completed graduate semester hours (or equivalent) beyond the second year (total graduate semester hours minus 36) by 18. Add the two percentages.

Specialized Experience GS12: One year of specialized experience which includes 1) reviewing contractor submittals, such as shop drawings, samples and data for compliance with contract documents; 2) conducting field surveillance to assess contractor's work performance; 3) review and recommend necessary changes or improvements to construction designs and/or specifications; and 4) preparing scopes of work, design drawings, calculations and specifications for construction or repair projects. This definition of specialized experience is typical of work performed at the next lower grade/level position in the federal service (GS-11).


Education

FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university. For further information, visit: https://sites.ed.gov/international/recognition-of-foreign-qualifications/

Some federal jobs allow you to substitute your education for the required experience in order to qualify. For this job, you must meet the qualification requirement using experience alone--no substitution of education for experience is permitted.

Additional information

  • Male applicants born after December 31, 1959, must complete a Pre-Employment Certification Statement for Selective Service Registration.
  • You will be required to provide proof of U.S. Citizenship.
  • One year trial/probationary period may be required.
  • Direct Deposit of Pay is required.
  • Selection is subject to restrictions resulting from Department of Defense referral system for displaced employees.
  • If you have retired from federal service and you are interested in employment as a reemployed annuitant, see the information in the Reemployed Annuitant information sheet.
  • This is a(n) Facilities Engineering Career Field position.
  • Multiple positions may be filled from this announcement.
  • Salary includes applicable locality pay or Local Market Supplement.
  • When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable. Visit https://www.dfas.mil/civilianemployees/civrelo/Civilian-Moving-Expenses-Tax-Deduction/ for more information.
  • Permanent Change of Station (PCS) allowances may be authorized, subject to the provisions of the Joint Travel Regulations and an agency determination that a PCS move is in the Government Interest.
  • Recruitment and/or Relocation Incentives may be authorized.
  • Since Alaska is considered a non-foreign overseas location, statutory return rights are applicable in many circumstances.
  • Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating.
  • Further certification from this announcement may take place up to 90 days beyond the closing date of this announcement.
  • Management may select any grade level announced for this position with noncompetitive promotion to the GS12 grade level.
  • Applicants must comply with the Exceptional Family Member Program (EFMP) requirements as outlined in the DoD Instruction 1315.19. For more information on EFMP, please visit the following link: https://www.armymwr.com/programs-and-services/personal-assistance/exceptional-family-member-program

Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.

How you will be evaluated

You will be evaluated for this job based on how well you meet the qualifications above.

Once the announcement has closed, a review of your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine whether you meet the qualification requirements listed on this announcement. Please follow all instructions carefully when applying, errors or omissions may affect your eligibility.

If, after reviewing your resume and/or supporting documentation, a determination is made that you have inflated your qualifications and/or experience, you may lose consideration for this position.

Veterans and Military Spouses will be considered along with all other candidates.

Your session is about to expire!

Your USAJOBS session will expire due to inactivity in 8 minutes. Any unsaved data will be lost if you allow the session to expire. Click the button below to continue your session.